On the ordering in [(C2H5)4N]2CuCl4 crystal: an X-ray study and theoretical considerations

The crystal structure [(C₂H₅)₄N]₂CuCl₄ has been determined by X-ray diffraction at 243K. The room temperature phase (phase I) belongs to the space group P4₂/nm [1] whereas the low temperature phase (phase II) is orthorhombic and belongs to the space group Pnna. The phase transition at T_c=258K is of improper ferroelastic type and it is associated with the ordering of the CuCl₄ ^2? and a partial ordering of the [(C₂H₅)₄N]⁺ ions which are disordered in the high temperature tetragonal phase. At lower temperature, there occurs another instability which could correspond to a complete ordering in the crystal.     

A new approach to the optimization of robust antenna arrayprocessors

The authors present a method for solving a class of optimization problems with nonsmooth constraints. In particular, they apply the method to the design of narrowband minimum-power antenna array processors which are robust in the presence of errors such as array element placement, look direction misalignment, and frequency offset. They first show that the constrained minimum power problem has a unique global minimum provided that the constraint set is nonempty. Then it is shown how the design problem derived directly from considerations of the sensitivity of the antenna array processor to errors can be transformed into a quadratic programming problem with linear inequality constraints which can be solved efficiently by the standard active set strategy. They also present numerical results for two types of nonsmooth constraints developed to provided robustness. These results confirm the effectiveness of the method     

Wind energy systems

Wind energy has matured to a level of development where it is ready to become a generally accepted utility generation technology. A brief discussion of this development is presented, and the operating and design principles are discussed. Alternative designs for wind turbines and the tradeoffs that must be considered are briefly compared. Development of a wind energy system and the impacts on the utility network including frequency stability, voltage stability, and power quality are discussed. The assessment of wind power station economics and the key economic factors that determine the economic viability of a wind power plant are presented     

Exchange interactions of excitons localized at opposite interfaces in type-II GaAs/AlAs superlattices: Optically detected magnetic resonance and level anticrossing

Two types of excitons, localized at opposite interfaces and characterized by different magnitudes of the exchange interactions at the same radiation energies, are simultaneously in type-II GaAs/AlAs superlattices. It is shown that the additional long-wavelength luminescence line in superlattices grown with growth interruptions after the GaAs layers is due to the recombination of an exciton localized at an inverted interface in regions where the quantum-well width is increased by one monolayer. Pis’ma Zh. éksp. Teor. Fiz. 64, No. 10, 701–706 (25 November 1996)     

Coulomb blockade electrometer with a high-T c island

We report on a successful attempt to fabricate a Coulomb blockade electrometer consisting of an ultrasmall YBa₂Cu₃O_7−δ (YBCO) island coupled to two gold electrodes through a high-resistance native surface tunnel barrier. A third electrode placed near the island was used as an electrostatic gate. Spectra typical for tunneling into the YBCO superconductor were reproducibly measured. At temperatures below 0.5 K the low-bias conductance was suppressed by the Coulomb blockade. The blockade could be periodically varied by the gate potential. An external magnetic field of up to 5 T strongly influenced the transport via the island but without any change in the period of the Coulomb oscillations. Pis’ma Zh. éksp. Teor. Fiz. 63, No. 2, 112–117 (25 January 1996) Published in English in the original Russian journal. Edited by Steve Torstveit.     

Determination of best shortened linear codes

The quality of a block code is determined by its capability to protect data against undetectable errors and by the number of check bits that are required for that purpose. For a given number of check bits there are codes with optimum bit error detecting capability in shortened block lengths. These codes are determined and tabulated. The residual error characteristics of some of the tabulated codes are compared with those specified in ISO/CCITT or IEC standard data transmission protocols. For block lengths and bit error rates that are typical in process control applications, the residual error rate of the determined codes is more than six orders of magnitude smaller than that of codes specified by widely used standard transmission protocols     

A high-current and high-temperature 6H-SiC thyristor

A 6H-SiC thyristor has been fabricated and characterized. A forward breakover voltage close to 100 V and a pulse switched current density of 5200 A/cm² have been demonstrated. The thyristor is shown to operate under pulse gate triggering for turn-on and turn-off, with a rise time of 43 ns and a fall time of less than 100 ns. The forward breakover voltage is found to decrease by only 4% when the operating temperature is increased from room temperature to 300°C. It is found that anode ohmic contact resistance dominates the device forward drop at high current densities     

Pulsed-current duty cycle dependence of electromigration-inducedstress generation in aluminum conductors

The effect of duty cycle of pulsed dc currents on the critical length-current density product, (jl_c), was measured using the Blech-Kinsbron edge-displacement technique [Thin Solid Films 25, 327 (1975)]. Unencapsulated Al edge-displacement segments mere stressed at various duty cycles and the critical lengths, the so-called “Blech lengths”, were measured. It was found that jl_c increased with decreasing duty cycle. We measured a factor of 2.6 increase in jl_c for the 25% duty cycle as compared to dc. This duty cycle dependence of Blech length implies that electromigration resistance for an integrated circuit would be increased for small duty cycle operation by increasing the fraction of interconnects which are sub-Blech-length and are not susceptible to EM damage     

Polarisation insensitive semiconductor optical amplifier withintegrated electroabsorption modulators

The authors demonstrate a 1.55 μm wavelength multiquantum well semiconductor optical amplifier, integrated with bulk layer electroabsorption modulators and passive waveguide beam expanders at the input and output ports. The device has a fibre to fibre gain of 9 dB, an extinction ratio of 15 dB per modulator, a spectral range >35 nm, and polarisation sensitivity <1 dB