Size-selected synthesis of PtRu nano-catalysts: reaction and size control mechanism

A rapid synthesis method for the preparation of PtRu colloids and their subsequent deposition on high surface area carbons is presented. The reaction mechanism is shown to involve the oxidation of the solvent, ethylene glycol, to mainly glycolic acid or, depending on the pH, its anion, glycolate, while the Pt(+IV) and Ru(+III) precursor salts are reduced. Glycolate acts as a stabilizer for the PtRu colloids and the glycolate concentration, and hence the size of the resulting noble metal colloids is controlled via the pH of the synthesis solution. Carbon-supported PtRu catalysts of controlled size can be prepared within the range of 0.7-4 nm. Slow scan X-ray diffraction and high-resolution transmission electron microscopy show the PtRu catalysts to be crystalline. The Ru is partly dissolved in the face-centered cubic Pt lattice, but the catalysts also consist of a separate, hexagonal Ru phase. The PtRu catalysts appear to be of the same composition independent of the catalyst size in the range of 1.2-4 nm. Particular PtRu catalysts prepared in this work display enhanced activities for the CH(3)OH electro-oxidation reaction when compared to two commercial catalysts.     

Single Particle Extinction and Scattering allows novel optical characterization of aerosols

We apply to aerosols the optical method of Single Particle Extinction and Scattering recently proposed for characterizing liquid suspensions and specifically adapted to the aim. It provides simultaneous measurements of the real and imaginary parts of the field scattered in the forward direction by single airborne particles passing through a tightly focused laser beam. The intensity of transmitted light is collected in the forward direction, thus realizing a self-reference interferometric scheme relying on the fundamentals of the optical theorem. A high frequency (20 MS/s), extended dynamics (12 bits) sampling is performed by a cheap segmented photodiode, and a specific pulse shape analysis is exploited to validate the signals against a precise mathematical model. We show that accessing two independent physical quantities allows to exploit physical models to recover the aerosol size distribution from the measurement of the refractive index, either real or even complex. Laboratory measurements have been performed with polydisperse aerosols made of water droplets and NaCl in the submicron range, and the system has been accurately characterized. Examples of measurements of graphite nanoparticles and Pyrethrum smoke are shown. Limitations are discussed.     

A simplified method for levoglucosan quantification in wintertime atmospheric particulate matter by high performance anion-exchange chromatography coupled with pulsed amperometric detection

Levoglucosan, a tracer for the assessment of the biomass burning contribution to atmospheric particulate matter (PM) concentrations, was determined by means of high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection (PAD). In this work we propose a modification in the instrumental set-up aiming at an improvement in the detector response by adding NaOH after chromatographic separation to increase the pH. The comparison between this technique and the gas chromatography/mass spectrometry (GC/MS) method commonly used showed good agreement. Repeatability is 4.8% RSD, limits of detection for pevoglucosan, mannosan and galactosan are in the range 0.001–0.002 µg mL^?1 in solution, corresponding to 3–4 ng m^?3 for 24 m³ of air sampled. PM10 samples were characterised for levoglucosan and for organic and elemental carbon contents. The preliminary results reported here for five sites in the Lombardy region (Northern Italy) are, as far as we know, the first data on levoglucosan contribution to OC in Italy. The levoglucosan concentrations observed in Lombardy vary in the range 173–963 ng m^?3 with an average levoglucosan-C to OC ratio ranging from 1.5% to 2.5%.     

Three-dimensional atomic structure of metastable nanoclusters in doped semiconductors

Aberration-corrected scanning transmission electron microscopy is used to determine the atomic structure of nanoclusters of cerium dopant atoms embedded in silicon. By channeling electrons along two crystallographic orientations, we identify a characteristic zinc-blende chemical ordering within CeSi clusters coherent with the silicon host matrix. Strain energy limits the size of these ordered arrangements to just above 1 nm. With the local order identified, we then determine the atomic configuration of an individual subnanometer cluster by quantifying the scattering intensity under weak channeling condition in terms of the number of atoms. Analysis based on single-atom visualization also evidences the presence of split-vacancy impurity complexes, which supports the hypothesis of a vacancy-assisted formation of these metastable CeSi nanophases.     

Breath Analysis: Comparison among Methodological Approaches for Breath Sampling

Despite promising results obtained in the early diagnosis of several pathologies, breath analysis still remains an unused technique in clinical practice due to the lack of breath sampling standardized procedures able to guarantee a good repeatability and comparability of results. The most diffuse on an international scale breath sampling method uses polymeric bags, but, recently, devices named Mistral and ReCIVA, able to directly concentrate volatile organic compounds (VOCs) onto sorbent tubes, have been developed and launched on the market. In order to explore performances of these new automatic devices with respect to sampling in the polymeric bag and to study the differences in VOCs profile when whole or alveolar breath is collected and when pulmonary wash out with clean air is done, a tailored experimental design was developed. Three different breath sampling approaches were compared: (a) whole breath sampling by means of Tedlar bags, (b) the end-tidal breath collection using the Mistral sampler, and (c) the simultaneous collection of the whole and alveolar breath by using the ReCIVA. The obtained results showed that alveolar fraction of breath was relatively less affected by ambient air (AA) contaminants (p-values equal to 0.04 for Mistral and 0.002 for ReCIVA Low) with respect to whole breath (p-values equal to 0.97 for ReCIVA Whole). Compared to Tedlar bags, coherent results were obtained by using Mistral while lower VOCs levels were detected for samples (both breath and AA) collected by ReCIVA, likely due to uncorrected and fluctuating flow rates applied by this device. Finally, the analysis of all data also including data obtained by explorative analysis of the unique lung cancer (LC) breath sample showed that a clean air supply might determine a further confounding factor in breath analysis considering that lung wash-out is species-dependent.     

Preparation and reactivity with azo-species of hydride and dihydrogen complexes of osmium stabilised by tris(pyrazolyl)borate and phosphite ligands

Mixed-ligand OsCl(Tp)L(PPh₃) complexes 1 [Tp = hydridotris(pyrazolyl)borate; L = P(OMe)₃, P(OEt)₃ and PPh(OEt)₂] were prepared by allowing OsCl(Tp)(PPh₃)₂ to react with an excess of phosphite. Treatment of chlorocomplexes 1 with NaBH₄ in ethanol afforded hydride OsH(Tp)L(PPh₃) derivatives 2. Stable dihydrogen [Os(η²-H₂)(Tp)L(PPh₃)]BPh₄ derivatives 3 were prepared by protonation of hydrides 2 with HBF₄ · Et₂O at −80 °C. The presence of the η²-H₂ ligand is supported by short T_1 min values and J_HD measurements on the partially deuterated derivatives. Treatment of the hydride OsH(Tp)[P(OEt)₃](PPh₃) complex with the aryldiazonium salt [4-CH₃C₆H₄N₂]BF₄ afforded aryldiazene [Os(4-CH₃C₆H₄NNH)(Tp){P(OEt)₃}(PPh₃)]BPh₄ derivative 4. Instead, aryldiazenido [Os(4-CH₃C₆H₄N₂)(Tp)[P(OEt)₃](PPh₃)](BF₄)₂ derivative 5 was obtained by reacting the hydride OsH(Tp)[P(OEt)₃](PPh₃) first with methyltriflate and then with aryldiazonium [4-CH₃C₆H₄N₂]BF₄ salt. Spectroscopic characterisation (IR, ¹⁵N NMR) by the ¹⁵N-labelled derivative strongly supports the presence of a near-linear Os-NN-Ar aryldiazenido group. Imine [Os{η¹-NHC(H)Ar}(Tp){P(OEt)₃}(PPh₃)]BPh₄ complexes 6 and 7 (Ar = C₆H₅, 4-CH₃C₆H₄) were also prepared by allowing the hydride OsH(Tp)[P(OEt)₃](PPh₃) to react first with methyltriflate and then with alkylazides.