6,6-dimethyl-1-oxa-spiro[2.5]octane. Conformational equilibrium in the gas phase as studied by microwave spectroscopy and molecular mechanics calculations

The gas-phase molecular structure of 6,6-dimethyl-1-oxa-spiro[2.5]octane has been investigated by joint analysis of the microwave spectrum and molecular mechanics calculations. Both experimental and theoretical data concur showing the presence of two stable conformational isomers having a chair cyclohexane ring. A set of structural parameters which reproduce the ground state rotational constants has been derived. The influence of 1,4 disubstitution is discussed in terms of deformations of the cyclohexane ring.     

Crystal structures and physico-chemical properties of Zn(II) and Co(II) tetraaqua(3-nitro-4-hydroxybenzoato) complexes: Their anticonvulsant activities as well as related (5-nitrosalicylato)–metal complexes

Purposes of these studies were to synthesize Zn(II) and Co(II) complexes of 3-nitro-4-hydroxybenzoic acid, determine their structures through X-ray crystallography, and obtain their anticonvulsant activities. Thermogravimetric, differential scanning calorimetry, impedance of aqueous solutions and magnetic properties analyses were also determined. Anticonvulsant and related activities of these complexes as well as Zn(II), Co(II), Ni(II) and Mg(II) (5-nitrosalicylato) complexes were determined by the National Institutes of Health, Antiepileptic Development Program. Results of these analyses are presented to document unique bonding features and physical properties of these compounds and their anticonvulsant activities. It is concluded that these compounds have chemical and physical properties that can be used to account for their anticonvulsant activities.     

Adsorption behavior of the (+/-)-Tröger's base enantiomers in the phase system of a silica-based packing coated with amylose tri(3,5-dimethyl carbamate) and 2-propanol and molecular modeling interpretation

The binary adsorption isotherms of the enantiomers of Tr?ger's base in the phase system made of Chiral Technologies ChiralPak AD [a silica-based packing coated with amylose tri(3,5-dimethyl carbamate)] as the chiral stationary phase (CSP) and 2-propanol as the mobile phase were measured by the perturbation method. The more retained enantiomer exhibits a S-shaped adsorption isotherm with a clear inflection point, the concentration of the less retained enantiomer having practically no competitive influence on this isotherm: In the entire range of concentrations studied, dq2/dC1 approximately 0. By contrast, the less retained enantiomer has a Langmuir adsorption isotherm when pure. At constant mobile phase concentrations, however, its equilibrium concentration in the adsorbed phase increases with increasing concentration of the more retained enantiomer and dq1/dC2 > 0. This cooperative adsorption behavior, opposed to the classical competitive behavior, is exceedingly rare but was clearly demonstrated in this case. Two adsorption isotherm equations that account for these physical observations were derived. They are based on the formation of an adsorbed multi-layer, as suggested by the isotherm data. The excellent agreement between the experimental overloaded elution profiles of binary mixtures and the profiles calculated with the equilibrium-dispersive model validates this binary isotherm model. The adsorption energies calculated by molecular mechanics (MM) and by molecular dynamics (MD) indicate that the chiral recognition arising from the different interactions between the functional groups of the CSP and the molecules of the Tr?ger's base enantiomers are mainly driven by their Van der Waals interactions. The MD data suggest that the interactions of the (-)-Tr?ger's base with the CSP are more favored by 8+/-(5) kJ/mol than those of (+)-Tr?ger's base. This difference seems to be a contributing factor to the increased retention of the - enantiomer on this chromatographic system. The modeling of the data also indicates that both enantiomers can form high stoichiometry complexes while binding onto the stationary phase, in agreement with the results of the equilibrium isotherm studies.     

Effect of the homogeneity of the column set on the performance of a simulated moving bed unit. II. Experimental study

Previous studies of the simulated moving bed (SMB) process assume identical characteristics of all the columns incorporated in a given unit. Due to the practical impossibility to manufacture identical columns, numerical applications of the theory to modeling and optimization use for each of the needed column parameter the average value for the entire column set. In this study, the effects of these simplifications on the actual productivity of the SMB process are evaluated by making exact calculations, i.e., by taking the differences in the porosity values into account. We apply a revised set of separation conditions previously introduced and derived from the equilibrium theory. Earlier theoretical results are compared to experimental results obtained in the study of the enantiomeric separation of Tr?ger's base on Chiralpak AD. Due to the nonLangmuirian character of the adsorption isotherms of these two compounds on the packing material used, the separation area cannot be determined analytically. As an alternative, a reliable numerical algorithm was used to scan a wider region and to define the separation area. The form of this area depends on the applied porosity values. A UV detector and a laser polarimeter located at one node of the SMB monitor on-line the internal concentration profiles. Excellent agreement between the calculated and the experimentally determined concentration profiles was obtained under nonlinear conditions. The influence of column-to-column variations on the performance of the SMB process was found to be more significant under nonlinear than under linear conditions.     

INTERACTIONS AND PHOTOREACTIVITY OF 5-ALKOXYPSORALENS WITH THYMINE. A MODEL APPROACH

Abstract— In order to investigate the interactions and the photoreactions in solution between the thymine (thy) and the psoralen (Pso) rings, we have prepared model compounds Thy-(CH₂)_n-Pso in which two aromatic chromophores Thy and Pso are linked by flexible polymethylene chains of varying length (CH₂)_n. Two series of compounds were examined and compared as models for the two important drugs 5-methoxypsoralen and 8-methoxypsoralen. Results concerning the 5-alkoxypsoralen series are reported here. In water, these model molecules exhibit intramolecular ring-ring stacking interactions as indicated by hypochromism in the UV and by shielding of the protons in ¹H NMR spectroscopy. These interactions disappear in organic solvents. The photochemical properties of the models were examined in relation with their ground state interaction properties. Irradiation at 365 nm carried out at the usual concentrations (10^-2-10^-3 M) leads exclusively to a stereoselective dimerization involving the psoralen moieties of the models at the 3,4 double bonds. However, when operating at exceedingly low concentrations (2 × 10^-5 M ), the psoralen photodimerization is avoided and a highly regio and stereo-selective psoralen thymine photoaddition is observed involving the 3,4 double bond of psoralen leading to the cis adduct. The same reaction occurs for all models under study being independent of the length of the (CH₂)_n polymethylene linking chain, n = 2 to 6, 12 and of the solvent used. This is unambiguous proof for the highest intrinsic photoreactivity of the 3,4 vs the 4',5' double bond in 5-alkoxy psoralen.     

Determination of the single component and competitive adsorption isotherms of the 1-indanol enantiomers by the inverse method

The inverse method of isotherm determination consists in calculating the numerical values of the coefficients of an isotherm model that give a set of chromatographic profiles in best possible agreement with the set of experimental profiles available. This method was applied to determine the adsorption isotherms of the 1-indanol enantiomers on a cellulose tribenzoate chiral stationary phase. Both single-component and competitive isotherms were determined by using no more than one or two overloaded band profiles. The isotherms determined from the overloaded band profiles agreed extremely well with the isotherms determined by frontal analysis. Several isotherm models were used and tested. The best-fit isotherm was selected by means of statistical evaluation of the results. The results show that the adsorption is best characterized with a model describing heterogeneous adsorption with bimodal adsorption energy distribution.     

Band splitting in overloaded isocratic elution chromatography I. The experimental evidence

A series of samples of increasing volume (from 0.001 to 4.0 cm3), containing the same constant concentration (40 g/l) of two simple compounds, ethylbenzoate and 4-tert.-butylphenol were injected on a Kromasil-C18 column with methanol-water (62:38. v/v) as the mobile phase. Complex band profiles were observed when the volume of the sample became large enough and strong band interference took place. The analysis of the fractions collected during the elution of the mixed band demonstrates that, for samples larger than 2 cm3, the band of 4-tert.-butylphenol is split into two separate bands, one eluted before and the other eluted after the band of ethylbenzoate. Such a phenomenon has never been observed yet in RPLC, under isocratic elution conditions.     

Pressure-induced effects in the heterogeneous adsorption of insulin on chromatographic surfaces

The effect of increasing the average column pressure (ACP) on the heterogeneous adsorption of insulin variants on a C18-bonded silica was studied in isocratic reversed-phase HPLC. Adsorption isotherm data of lispro and porcine insulin obtained for values of the ACP ranging from 57 to 237 bar were fitted to the Langmuir-Freundlich and the Tóth equation. The resulting isotherm parameters, including the equilibrium adsorption constant and the heterogeneity index, were next used for the calculation of distribution functions characterizing the energy of interactions between the adsorbed insulin molecules and the stationary phase. It was observed that increasing the pressure by 180 bar causes a broadening of the distribution functions and a shift of the position of their maximum toward lower interaction energies. These findings suggest that, under high pressures, the insulin molecules interact with the stationary phase in a more diversified way than under low pressures. Additionally, the most probable value of the energy of the insulin-surface interactions becomes lower when the ACP increases. The pressure-induced changes in the interaction of insulin variants with the hydrophobic surface are attributed to a possible conformational flexibility of the molecular structure of this protein.     

Surface diffusion in reversed-phase liquid chromatography

More than 40 years ago, Giddings pointed out in “Dynamics of Chromatography” that surface diffusion should become an important research topic in the kinetics of chromatographic phenomena. However, few studies on surface diffusion in adsorbents used in chromatography were published since then. Most scientists use ordinary rate equations to study mass transfer kinetics in chromatography. They take no account of surface diffusion and overlook the significant contributions of this mass transfer process to chromatographic behavior and to column efficiency at high mobile phase flow rate. Only recently did the significance of surface diffusion in separation processes begin to be recognized in connection with the development of new techniques of fast flow, high efficiency chromatography. In this review, we revisit the reports on experimental data on surface diffusion and introduce a surface-restricted molecular diffusion model, derived as a first approximation for the mechanism of surface diffusion, on the basis of the absolute rate theory. We also explain how this model accounts for many intrinsic characteristics of surface diffusion that cannot properly be explained by the conventional models of surface diffusion.