关于非平行板电容器电容计算的讨论

用串联方法计算非平行板电容器的电容，简便地得到与其他方法相同的结果。     

Crystallization process of Bi(Pb)-Sr-Ca-Cu-O glass

A crystallization study has been carried out for rapidly solidified Bi₂Pb_0.5Sr₂Ca₄Cu₅O_x glass. Glass transition temperature T _g, crystallized superconducting phases and microstructural changes were measured and analysed by differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The crystallization mechanism of the three superconducting phases — (2201) 20 K phase, (2212) 80 K phase, and (2223) 110 K phase — has been discussed, and a time-temperature-transformation diagram for the glass has been constructed.     

Ga1-xInxAs/InAsyP1-y/InP异质结的MOCVD生长及表征

Ga1-xInxAs(x>0.53)材料是未来长距离低损耗光纤通信的理想光源材料和探测器材料之一.我们采用水平常压MOCVD系统,在InP衬底上成功地生长了Ga1-xInxAs(x>0.53)/InAsyP1-y/Inp异质结材料.其中InAs1-yPy为组份阶梯变化的多层结构.由样品的(400)面X光衍射结果测定了各层组份.由二次离子质谱(SIMS)得到了样品剖面组份变化结果,证明InAs1-yPy层组份为阶梯状变化的.通过对光致发光结果和X光衍射结果比较,可以看到,InAsyP1-y层通过位错和弹性畸变二种方式来释放或积累Ga1-xInxAs与InP间的失配应力,从而减少了Ga1-xInxAs中的失配位错.有效地改善了Ga1-xInxAs的质量.已获得了x高达0.94表面光亮的Ga1-xInxAs/InAs1-yPy/InP异质结材料.     

淀积条件对GDa—SiNx薄膜电学特性的影响

本文讨论了用辉光放电法制备氮化硅薄膜时衬底温度、射频功率和气体流量比对薄膜的电导率、介电常数和击穿强度的影响。通过优化生长条件，制备了优质非晶氮化硅薄膜，其介电常数为７．５、击穿强度为５．５ＭＶ／ｃｍ、电导率为１０－１３（Ωｃｍ）－１。     

教学质量的时齐马尔可夫链评估法

本文研究了教学质量评估中的一种定量分析方法──时齐马尔可夫链评估法．阐明了这种方法的理论依据及其实施程序、并指出它较之其他教学质量评估法更显合理．     

BEPCⅡ高频发射机和环流器的调整和测试

北京正负电子对撞机升级改造工程(BEPCⅡ)将采用的频率500MHz、输出功率250kW的高频发射机和环流器已安装、调整、测试和验收完毕,这是国内建立的第一套500MHz/250kW发射机系统.本文将详细介绍机器的调测试的原理和各项测量内容及结果, 并比较设计指标和要求,来阐述此发射机的实际技术指标和测试性能.     

A new kind of compound solid-state quasi-optical power combiner

In this paper, a new kind of solid-state quasi-optical power combiner is presented. It consists of two or more singlecavity multiple-device power combiners and a Fabry-Perot cavity. The experimenal results using six Gunn diodes at X-band show that the total output power is higher than 400 mW, the total combining efficiency is as high as 83%, and the frequency stability is better than 10^?5.     

双包层椭圆光波导解析解

解析求解了双包层椭圆光纤中的波动方程，得到了模式精确解有模式特征方程。对基模的特征方程进行了数值计算，给出了不同椭圆比下的归一化双折射和模间色散随归一化频率的变化关系曲线，并与高斯近似解的结果进行了比较。     

The limits of hamiltonian structures in three-dimensional elasticity,shells, and rods

Summary This paper uses Hamiltonian structures to study the problem of the limit of three-dimensional (3D) elastic models to shell and rod models. In the case of shells, we show that the Hamiltonian structure for a three-dimensional elastic body converges, in a sense made precise, to that for a shell model described by a one-director Cosserat surface as the thickness goes to zero. We study limiting procedures that give rise to unconstrained as well as constrained Cosserat director models. The case of a rod is also considered and similar convergence results are established, with the limiting model being a geometrically exact director rod model (in the framework developed by Antman, Simo, and coworkers). The resulting model may or may not have constraints, depending on the nature of the constitutive relations and their behavior under the limiting procedure. The closeness of Hamiltonian structures is measured by the closeness of Poisson brackets on certain classes of functions, as well as the Hamiltonians. This provides one way of justifying the dynamic one-director model for shells. Another way of stating the convergence result is that there is an almost-Poisson embedding from the phase space of the shell to the phase space of the 3D elastic body, which implies that, in the sense of Hamiltonian structures, the dynamics of the elastic body is close to that of the shell. The constitutive equations of the 3D model and their behavior as the thickness tends to zero dictates whether the limiting 2D model is a constrained or an unconstrained director model. We apply our theory in the specific case of a 3D Saint Venant-Kirchhoff material andderive the corresponding limiting shell and rod theories. The limiting shell model is an interesting Kirchhoff-like shell model in which the stored energy function is explicitly derived in terms of the shell curvature. For rods, one gets (with an additional inextensibility constraint) a one-director Kirchhoff elastic rod model, which reduces to the well-known Euler elastica if one adds an additional single constraint that the director lines up with the Frenet frame. This paper is dedicated to the memory of Juan C. Simo This paper was solicited by the editors to be part of a volume dedicated to the memory of Juan Simo.