Understanding energetic disorder in electron-deficient-core-based non-fullerene solar cells

Recent advances in material design for organic solar cells(OSCs) are primarily focused on developing near-infrared nonfullerene acceptors, typically A-DA′D-A type acceptors(where A abbreviates an electron-withdrawing moiety and D, an electron-donor moiety), to achieve high external quantum efficiency while maintaining low voltage loss. However, the charge transport is still constrained by unfavorable molecular conformations, resulting in high energetic disorder and limiting the device performance. Here, a facile design strategy is reported by introducing the "wing"(alkyl chains) at the terminal of the DA′D central core of the A-DA′D-A type acceptor to achieve a favorable and ordered molecular orientation and therefore facilitate charge carrier transport. Benefitting from the reduced disorder, the electron mobilities could be significantly enhanced for the"wing"-containing molecules. By carefully changing the length of alkyl chains, the mobility of acceptor has been tuned to match with that of donor, leading to a minimized charge imbalance factor and a high fill factor(FF). We further provide useful design strategies for highly efficient OSCs with high FF.     

Zinc‐catalyzed transformation of diarylphosphoryl azides to diarylphosphate esters and amides

We have developed a facile and efficient procedure for the synthesis of diarylphosphate esters and amides. Using Zn(acac)₂ as the catalyst, the reaction of diarylphosphoryl azides with aliphatic alcohols and phenols through an unusual P?N bond cleavage provided a number of diarylphosphate esters in good yields (22 examples, up to 94%). Additionally, various diarylphosphate amides were obtained from the corresponding amines in excellent yields as well (8 examples, up to 96%).     

Correction: Cu-catalyzed C–C bond formation of vinylidene cyclopropanes with carbon nucleophiles

Correction for ‘Cu-catalyzed C–C bond formation of vinylidene cyclopropanes with carbon nucleophiles’ by Jichao Chen et al., Chem. Sci., 2019, 10, 10601–10606.

We regret that in the original article the structure of compound 1 in Tables 1–3 was incorrect. The correct structure is given below.The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.     

Numerical and Experimental Investigation of Liquid Residue in 90° Bend Microchannel Based on Gas–Liquid Two-Phase Flow

The microfluidic chip for nucleic acid detection in vitro is an essential application of microfluidic technology to the process of in vitro diagnosis. The 90° bend microchannels in chip designed for facilitating assay reagent delivery may cause reagent residues and cast mutual contamination between detection reagents, which significantly affects the detection accuracy. In this paper, a two-dimensional gas–liquid two-phase flow model is constructed to simulate the liquid residue phenomenon. Using the results of simulation, the residual liquid generation can be observed and the area of residual liquid can be obtained. The accuracy of the numerical simulation is verified by comparison with the experimental results. The effects of the fillet radius R, the diameter ratio d₁/d₂ of the vertical to horizontal sections, the flow velocity v, and the surface roughness R_a on the residual amount are studied. We find that the fillet radius is inversely proportional to the residual amount within the range v = 20–100 mm/s and there is almost no liquid residue in the channel when the radius increases to R = 1 mm. When the channel diameter ratio d₁/d₂ increases, the liquid residual amount also increases by approximately 98%. The increased surface roughness R_a significantly increases the residual amount. The results of this study provide a reference for the optimal design of microchannels on chips.

     

Rate-dependent asymmetric hysteresis modeling and robust adaptive trajectory tracking for piezoelectric micropositioning stages

Nonlinear Dynamics - Hysteresis is an inherent characteristic of piezoelectric materials that can be determined by not only the historical input but also the input signal frequency. Hysteresis...     

Dynamic and wear characteristics of self-lubricating bearing cage: effects of cage pocket shape

34,354,966 active cases and 460,787 deaths because of COVID-19 pandemic were recorded on November 06, 2021, in India. To end this ongoing global COVID-19 pandemic, there is an urgent need to implement multiple population-wide policies like social distancing, testing more people and contact tracing. To predict the course of the pandemic and come up with a strategy to control it effectively, a compartmental model has been established. The following six stages of infection are taken into consideration: susceptible (S), asymptomatic infected (A), clinically ill or symptomatic infected (I), quarantine (Q), isolation (J) and recovered (R), collectively termed as SAIQJR. The qualitative behavior of the model and the stability of biologically realistic equilibrium points are investigated in terms of the basic reproduction number. We performed sensitivity analysis with respect to the basic reproduction number and obtained that the disease transmission rate has an impact in mitigating the spread of diseases. Moreover, considering the non-pharmaceutical and pharmaceutical intervention strategies as control functions, an optimal control problem is implemented to mitigate the disease fatality. To reduce the infected individuals and to minimize the cost of the controls, an objective functional has been constructed and solved with the aid of Pontryagin’s maximum principle. The implementation of optimal control strategy at the start of a pandemic tends to decrease the intensity of epidemic peaks, spreading the maximal impact of an epidemic over an extended time period. Extensive numerical simulations show that the implementation of intervention strategy has an impact in controlling the transmission dynamics of COVID-19 epidemic. Further, our numerical solutions exhibit that the combination of three controls are more influential when compared with the combination of two controls as well as single control. Therefore, the implementation of all the three control strategies may help to mitigate novel coronavirus disease transmission at this present epidemic scenario.

     

On analysis method for infrared multi-sites system performance

The calculation method about infrared multi-sites passive system location is introduced based on the principle of the weighted least square method, and the variance matrix of estimated error is offered. Through deduction, it can be found out that treated appraise precision can be directly analyzed and deduced without carrying out real measure and reaching estimation value. The simulation result shows that the system performance based on the weighted least square method is much better than the traditional passive location method, and it can be also used for reference to the research of the location algorithm of similar system.     

A Parallel-Based Lifting Algorithm and VLSI architecture for DWT

A novel Parallel-Based Lifting Algorithm （PBLA） for Discrete Wavelet Transform （DWT）, exploiting the parallelism of arithmetic operations in all lifting steps, is proposed in this paper. It leads to reduce the critical path latency of computation, and to reduce the complexity of hardware implementation as well. The detailed derivation on the proposed algorithm, as well as the resulting Very Large Scale Integration （VLSI） architecture, is introduced, taking the 9/7 DWT as an example but without loss of generality. In comparison with the Conventional Lifting Algorithm Based Implementation （CLABI）, the critical path latency of the proposed architecture is reduced by more than half from （4Tm ＋ 8Ta）to Tm ＋ 4Ta, and is competitive to that of Convolution-Based Implementation （CBI）, but the new implementation will save significantly in hardware. The experimental results demonstrate that the proposed architecture has good performance in both increasing working frequency and reducing area.     

固相萃取技术在六价铬检测中的应用

欧盟RoHS指令中有害物质包括:Pb、Hg、Cd、Cr6 、PBB和PBDE.而六价铬的检测方法主要有:针对聚合物材料和电子材料的US EPA3060A碱溶提取,采用US EPA7196A比色定量检测.上述方法不能很好地解决深色试样提取液颜色对比色的影响.本文采用固相萃取技术对样品进行处理,从而很好地克服了提取液颜色对比色影响的难题.     

MINITAB在可靠性数据分析中的应用

本文介绍了MINITAB软件在可靠性数据分析中的应用.给出了恒定应力加速寿命试验数据分析的步骤,并以恒定应力加速寿命试验为例,说明了使用MINITAB分析数据的操作步骤.