Improvement of RCA transistor using RTA annealing after theformation of interfacial oxide

A polysilicon emitter RCA transistor (an ultra-thin interfacial oxide layer exists between polysilicon and silicon emitter) is presented which can operate at 77 K for the first time. An ultra-thin (1.5 nm) interfacial oxide layer is grown deliberately between polysilicon and silicon emitter using RCA oxidation and excellent device stability is obtained after rapid thermal annealing (RTA) treatment in nitrogen atmosphere. The RCA transistor exhibits good electrical performance at very low temperature for an emitter area of 3 × 8 μm². The maximum toggle frequency of a 1:2 static divider is 1.2 GHz and 732 MHz at 300 K and 77 K, respectively     

粒子-转子模型和推转壳模型中的能谱统计分析

用粒子–转子模型和推转壳模型研究了6个粒子分别填充在单j壳和双j壳上的混沌行为.分析了单j壳和双j壳情况下能谱的最近邻能级间距分布和谱刚度随自旋及推转频率的变化,结果表明,当组态空间大小不变时,系统在双j壳(g_7/2+d_5/2)情况下比在单j壳(i_13/2)情况下更规则,而当组态空间从单j壳(i_13/2)扩大到双j壳(i_13/2+g_9/2)时,系统的混沌程度变化不大.同时比较了将6个粒子的两体相互作用分别取为δ力和对力时的系统的混沌行为     

用TMS320C6201实现H.263编译码系统

介绍了用TMS320C6201实现视频压缩编码标准H.263的编译码系统,并以编码系统为例,给出其硬件设计及软件的优化处理方法.     

基因芯片荧光图象采集与分析

描述了基因芯片荧光图象的光学共聚焦成象,大范围高速扫描与控制,数据采集的原理和方法.并讨论了基因芯片荧光图象的分析算法,即模板定位与阈值分割相结合的半自动算法,并将其计算结果与完全采用人工分割算法的结果进行了比较.     

贝克曼AllegraTM21R型超高速离心机故障排除一例

贝克曼Allegra^TM 21R型超高速离心机开机后，操作面板上出现错误代码“28”，离心机不旋转。离心机的电机采用无刷感应驱动，由电机驱动电源模块BSMl0GD60DN2驱动离心机的电机。故障是由于电源模块BSMl0GD60DN2损坏引起的。采用东芝三相桥式IGBT电源模块MG25Q6ES42代替BSMl0GD60DN2，并更换已烧毁的栅极电阻后。开机试验，仪器恢复正常。     

Laser-induced damage of Ta2O5/SiO2 narrow-band interference filters under different 1064 nm Nd:YAG laser modes

The laser-induced damage (LID) behavior of narrow-band interference filters was investigated with a Nd:YAG laser at 1064 nm under single-pulse mode and free-running mode. The absorption measurement of such coatings was performed with surface thermal lensing (STL) technique. The damage morphologies under the two different laser modes were also studied in detail. It was found that all the filters exhibited a pass-band-center-dependent absorption and laser-induced damage threshold (LIDT) behavior, but the damage morphologies were diverse. The explanation was given with the analysis of the electric field distribution and the operational behavior of the irradiation laser.     

A theoretical study of the ion pair SN2 reaction between lithium isocyanates with methyl fluoride with inversion and retention mechanism

This paper is devoted to a detailed theoretical study of an ion pair S_N2 reaction LiNCO+CH₃F in the gas phase and in solution at the level of MP2(full)/6-31+G**//HF/6-31+G**. Two possible reaction mechanisms, inversion and retention, are discussed. There are eight possible reaction pathways. The inversion mechanism is more favorable no matter in the gas phase or in solution based on analyses of the transition structures. Methyl isocyanate should form preferentially in the gas phase and more stable methyl cyanate is the main product in solution. The retardation of the reaction in solvents was attributed to the difference in solvation in the separated reactants and in the transition state.     

自适应传输速率MAC层协议的探讨

随着无线通信技术的发展和器件性能的提高,无线网络有能力支持更高的数据传输速率.随之而来的问题是如何提高网络的性能,即根据无线信道的状况而自适应地改变传输参数.文中讨论了媒体访问控制(MAC)层协议上多跳无线网络自适应传输速率的技术方案.该方案运用自适应调制和编码技术,可以最大限度地利用信道的容量,根据不同终端报告的信道情况提供个性的调制与编码选择;对位置较好的用户提供高速率的数据服务,增加系统的吞吐率;并且由于信道的自适应是通过改变调制和编码的方式,而不是像功率控制那样改变发射功率,因此系统中干扰变化很小.     

Investigation of the Property Constants of Both Al and Cu Complexes with Picramine Ca and Using Competition Coordination for the Selective Determination of Trace Amounts of Cu

The reactions between Cu(II) and picramine CA (PCA) and Al(III) and PCA were both sensitive at pH 7. The competition coordination between Cu and the Al–PCA complex was applied to the selective determination of Cu (CCSD) by the spectral correction technique. Results have shown that the complexes formed at pH 7 are Al₂(PCA) and Cu(PCA)₃, their cumulative stability constants are 4.43 × 10⁵ and 2.08 × 10¹⁵, respectively, and their real molar absorptivities are 5.78 × 10³ at 650 nm and 3.19 × 10⁴at 530 nm. At the analysis of the samples, the relative standard deviation (RSD) was 5.0% and the recovery rate of Cu was between 94 and 108%.