PREPARATION OF CUO/γ-Al2O3 CATALYSTS FOR CATALYTIC COMBUSTION VOCS VIA PLASMA

CuO/γ-Al2O3 catalysts were prepared by plasma treatment and conventional impregnation methods. The catalytic combustion of two kinds of volatile organic compounds (VOCs), toluene and benzene, were carried out over these CuO/γ-Al2O3 catalysts. The surface properties of these catalysts were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The experimental results showed that in catalytic combustion the activity of the CuO/γ-Al2O3 catalyst prepared via plasma was much higher than that of the CuO/γ-Al2O3 catalyst prepared by conventional impregnation method. XRD results showed that an enhanced dispersion had been achieved with the plasma treatment. SEM results indicated that the size became much smaller and the surface became more uniform with the plasma treatment.     

聚合物固体电解质基体的研究进展

综述了聚合物固体电解质基体的设计原理、分类和研究进展，并对今后在聚合物基体设计方面的研究前景作了展望。     

液相合成方形PbS纳米晶的光学特性

采用一种简单、温和的液相合成方法制备了PbS纳米晶，利用透射电镜和高分辨透射电镜对PbS纳米晶的形貌与晶型结构进行了表征．研究了PbS纳米晶的光学吸收和光致发光特性，并比较分析了包覆剂聚乙烯吡咯烷酮(PVP)和回流时间对产物光学特性的影响．结果表明：PVP分子链中的O原子与纳米晶表面吸附的游离态Pb原子形成Pb-O配位键，使产物的激子吸收大为减弱，同时引起了表面浅束缚态能量的升高，最终导致了荧光淬灭现象．     

The Wave Function with Symplectic Symmetry and Its Application

The antisymmetrized geminal power (AGP) and sequential product of geminals(SPG) functions, the basis functions with symplectic symmetry, are linearly combined to calculate the ground state of the LiH molecule. The calculation results show that the AGP or SPG function gives the same ground state results as the linear combination.     

A Novel Total Synthesis of (±)Shikonin

Shikonin 1 was a key component isolated from the traditional Chinese herbal medicine, Zicao(Lithospermum erythrorhizon Sieb.et Zucc), which possesses multiple biological activities1. There have been many synthetic routes to shikonin, however, all these ro…     

铜催化下格氏试剂与酰卤的选择性偶合: 直链酮化合物的合成

在一般情况下,格氏试剂与酰卤偶合反应难以控制在酮阶段,往往得到叔醇。在较低温度下有机铜试剂与酰卤偶合可高产率地得到酮,所以用固体铜盐CuX(X=Cl、Br、I)作为格氏试剂与酰卤偶合的催化剂,可以提高反应的选择性,从而提高酮的产率。但固体铜盐的催化反应仅适合于空间位阻较大的脂肪酮和某些芳香酮的制备,对于直链脂肪酮的制备则产率很低。我们采用可溶性铜络合物Li_2Cucl_4(四氯合铜酸锂)等作催化剂,在均相溶液中反应,有效地提高了催化效果及反应的选择性,从而使格氏试剂与酰卤的偶合反应成功地用于直链脂肪酮的制备,产率良好。     

四苯基卟啉铂电致发光性能的研究

四苯基卟啉铂(PtTPP)可以作为红光掺杂材料制备有机电致发光器件，采用的器件结构为[ITO／CuPc／NPB／BePP2：PtTPP／LiF／Al]，其中BePP2：PtTPP的共沉积膜作为发射层．实验结果表明在发射层中存在着从BePP2到PtTPP的能量传递．通过改变掺杂层中PtTPP的浓度来考察器件的性能，当PtTPP的掺杂浓度在8％(物质的量比)时，器件呈现纯正的红光发射，发射峰位于668nm，器件的效率为0．004lm／W．     

可移动式微量氧分析仪检定装置研制

研制一种新型可移动式微量氧分析仪检定装置。该装置由标准气体、零点气、脱氧纯化器、减压阀、调节阀、4通阀、5通阀、不锈钢管路、流量控制系统、移动平台等组成。该装置气密性好,15 min内可将装置内氧气浓度由20.9%降至不大于0.1μmol/mol,对于0~10μmol/mol的微量氧分析仪检定结果的扩展不确定度为Urel=1.7%FS(k=2)。该装置满足气体标准物质的连续切换和在线检定的需要,检定时间短,结果准确可靠,可为在线式和非在线式微量氧分析仪的量值溯源提供有效保障。     

A Mild and Efficient Deprotection of Geminal Diacetates Catalyzed by FeCl3 ·6H2O in Ionic Liquid

The selective deprotection of geminal diacetates promoted by FeCl3·6H2O in the ionic liquid [bmim] [BF4] canbe efficiently achieved in good yields. The ionic liquid and the catalyst can be recycled easily and the process is car ried out under mild conditions.     

Dense Sphene-type Solid Electrolyte Through Rapid Sintering for Solid-state Lithium Metal Battery

The sphene-type solid electrolyte with high ionic conductivity has been designed for solid-state lithium metal battery. However, the practical applications of solid electrolytes are still suffered by the low relative density and long sintering time of tens of hours with large energy consumption. Here, we introduced the spark plasma sintering technology for fabricating the sphene-type Li_1.125Ta_0.875Zr_0.125SiO₅ solid electrolyte. The dense electrolyte pellet with high relative density of ca. 97.4% and ionic conductivity of ca. 1.44×10^-5 S/cm at 30℃ can be obtained by spark plasma sintering process within the extremely short time of only ca. 0.1 h. Also the solid electrolyte provides stable electrochemical window of ca. 6.0 V(vs. Li⁺/Li) and high electrochemical interface stability toward Li metal anode. With the enhanced interfacial contacts between electrodes and electrolyte pellet by the in-situ formed polymer electrolyte, the solid-state lithium metal battery with LiFePO₄ cathode can deliver the initial discharge capacity of ca. 154 mA·h/g at 0.1 C and the reversible capacity of ca. 132 mA·h/g after 70 cycles with high Coulombic efficiency of 99.5% at 55℃. Therefore, this study demonstrates a rapid and energy efficient sintering strategy for fabricating the solid electrolyte with dense structure and high ionic conductivity that can be practically applied in solid-state lithium metal batteries with high energy densities and safeties.