AOTF红外光谱测量系统及其设计分析

介绍了一种以声光可调谐滤光器(AOTF)为色散元件的新型红外光谱测量系统。系统采用计算机控制下的直接数字频率合成(DDS)技术，实现电调谐波长扫描。采用双光束相关检测技术，改善了系统的信噪比。文中对红外光谱测量系统的有关设计问题进行了论述。     

固体相干激光雷达多普勒测速实验

采用单块非平面环形激光器作为种子,注入到单纵模运转的Q开关高重复频率Nd:YAG激光器为发射源,同时运用温度反馈控制,使种子光源和从动激光器自由振荡频率相匹配,实现稳定的单频输出.采用外差式相干探测的方法,测量运动目标的多普勒频移,从而达到测量运动物体速度信息的目的.根据实验现象,分析失谐频率△ω对外差探测的影响,提出了改进措施并应用于实验.比较已观测到的实验数据与理论计算值分析误差来源.     

基于ASTER数据的地物光谱比辐射率的反演研究

比辐射率光谱表征着一个物体的内部物理和化学特征,是定量化遥感的一个关键参数.本文利用ASTER数据的第10至14波段,根据其数据的特点,基于温度比辐射率分离算法的思想,提出了将比辐射率标准化法(Normalize Emissivity Method,NEM)、经验公式、比值法(Ratio Method)这几个模块结合起来,在迭代的基础上计算出比辐射率的新算法.本文简要分析了模型误差的主要来源,并且把本文的算法与简化的ASTER的TES算法进行了比较.分析表明本文的算法是可行、有效的,而且该算法简单,易于实现,在能够保证精度的情况下运算速度快;同时也说明ASTER遥感数据用于反演地物的比辐射率可以得到比较理想的结果,具有良好的应用前景.     

具有控制项的限定记忆卡尔曼滤波器

在已有的限定记忆卡尔曼滤波器的基础上 ,将确定性先验信息作为控制项加以应用 ,推导出了完整的限定记忆卡尔曼滤波公式 ,从而在记忆长度确定的情况下 ,有效地减小了模型不准的误差 ,降低了滤波总误差。仿真同样表明了该方法的有效性     

Towards implementation of a nickel silicide process for CMOS technologies

In this paper, we review some of the advantages and disadvantages of nickel silicide as a material for the electrical contacts to the source, drain and gate of current and future CMOS devices. We first present some of the limitations imposed on the current cobalt silicide process because of the constant scaling, of the introduction of new substrate geometries (i.e. thin silicon on insulator) and of the modifications to the substrate material (i.e. SiGe). We then discuss the advantages of NiSi and for each of the CoSi₂ limitations, we point out why Ni is believed to be superior from the point of view of material properties, miscibility of phases and formation mechanisms. Discussion follows on the expected limitations of NiSi and some of the possible solutions to palliate these limitations.     

一种新的基于快速功控的多普勒估计

针对采用快速功控的移动通信系统提出了一种简便的多普勒估计方法。该方法利用功控后的接收信号电平的平稳性与最大多普勒频移有密切关系这一特点，通过测量接收信号电平的平稳性估计多普勒频移。文中在单径瑞利衰落信道条件下对这一方法进行了仿真验证，并同文献中提出的COV方法进行了比较，仿真结果表明在信道变化不是太快时本方案有较好的估计精度。     

不同注F剂量与CMOS运放电路辐照损伤的相关性

在不同注F剂量条件下,对P沟和N沟两种不同差分对输入CMOS运放电路的电离辐照响应进行了研究.分析比较了注F和未注F运放电路电离辐照响应之间的差异.结果表明,在栅场介质注入适量的F,可有效抑制辐照感生的氧化物电荷尤其是界面态的增长,从而提高CMOS运放电路的抗辐照特性.     

Analysis on X-Ray Laser Generation with EM-Wave Wiggler

The possibility of realizing SASE Free Election Laser in x-ray waveband with EM-wave wiggler is studied in this paper. SASE effect including saturation length, saturation power and nonlinear process is explored through a 3-D simulation code. A utilization of seed light from laser plasma x-ray is also analyzed, which demonstrates the feature of shortening the interaction length for saturation. The results show that sizeable output power of x-ray laser would be generated with a middle energy electron beam.     

完全非相干白光一维光生伏打暗空间孤子

使用白炽灯作光源在LiNbO₃∶Fe晶体内实验观察到一维白光光生伏打暗空间孤 子. 由奇数 和偶数初始条件分别产生了灰孤子和灰孤子对，它们所感应的波导能导向白光和相干光. 用 相干光清楚地探测到它们内部的多模结构. 该实验证明了白光光生伏打暗空间孤子的存在， 并指出了用完全非相干的白光暗孤子控制和导向相干光的可能性. 关键词： 光生伏打效应 自陷 完全非相干孤子 波导     

Discrete Wavelet Transform: Architectures, Design and Performance Issues

Due to the demand for real time wavelet processors in applications such as video compression [1], Internet communications compression [2], object recognition [3], and numerical analysis, many architectures for the Discrete Wavelet Transform (DWT) systems have been proposed. This paper surveys the different approaches to designing DWT architectures. The types of architectures depend on whether the application is 1-D, 2-D, or 3-D, as well as the style of architecture: systolic, semi-systolic, folded, digit-serial, etc. This paper presents an overview and evaluation of the architectures based on the criteria of latency, control, area, memory, and number of multipliers and adders. This paper will give the reader an indication of the advantages and disadvantages of each design.