Deposition of Hydrogen-Free Silicon Nitride Thin Films by Microwave ECR plasma Enhanced Magnetron Sputtering at Room Temperature

Hydrogen-free silicon nitride （SiNx） films were deposited at room temperature by microwave electron cyclotron resonance （MW-ECR） plasma enhanced unbalance magnetron sputtering system. Both Fourier-transform infrared spectroscopy and x-ray photoelectron spectroscopy are used to study the bonding type and the change of bonding structures of the silicon nitride films. The results indicate that the chemical structure and composition of SiNx films deposited by this technique depend strongly on the N2 flow rates, the stoichiometric SiNx film, which has the highest hardness of 22.9 GPa, could be obtained at lower N2 flow rate of 4 sccm.     

TMS320C67系列EMIF与异步FIFO存储器的接口设计

介绍了TI公司TMS320C67系列DSP的EMIF(外部存储器接口)与异步FIFO(先进先出)存储器的硬件接口设计,着重描述了用EDMA(扩展的直接存储器访问)方式读取FIFO存储器数据的软件设计流程,最后说明了在选择FIFO存储器时应注意的问题.由于EMIF的强大功能,不仅具有很高的数据吞吐率,而且可以与不同类型的同步、异步器件进行无缝连接,使硬件接口电路简单,调试方便.运用EDMA的方式进行数据传输,由EDMA控制器完成DSP存储空间内的数据搬移,这样可以最大限度地节省CPU的资源,提高整个系统的运算速度.     

相对论平均场理论中各种有效相互作用对中子星性质的影响

基于相对论平均场理论，研究了各种相互作用参数组(NL1、NL3、NLSH、TM1和GL-97)对中子星物质的性质和中子星整体结构的影响．发现参数组NL1、NL3和NLSH所给出的中子星内部的介子场强度、物质的组成比例、物态方程和中子星的整体特点基本相同，但与TM1和GL-97之间有较大的差别．相对于其他参数组，GL-97给出的介子场强度最弱，中子星的相对数密度最大，物态方程也最软，同时采用GL-97参数组计算的中子星的最大质量也最小．     

一维粗糙表面散射特征的数值分析

使用Monte Carlo模拟的方法得出了随机粗糙表面，在Kirchhoff近似的基础上，利用数值分析的方法分析了一维随机粗糙表面的散射特征，得出了一维随机粗糙表面散射分布曲线，我们还考虑了遮蔽效应的影响，并且讨论了Kirchhoff近似的有效性。     

Control of LHCD on the HL-2A Tokamak

in order to study non-indutive plasma current production, the lower hybrid current drive（LHCD） experiment on the HL-2A tokamak is carried out. Simultaneously a microcomputer has been used to control the whole LHCD system. During the experiment this year, we can monitor and protect the LHCD system by use of the microcomputer control system, which will imediately switch off the microwave power to be launched into the tokamak if the plasma is disrupted. All this ensure that the microwave is injected into the equipment correctly.     

A New Cycloartane from Sphaerophysa salsula

A novel cycloartane,named sphaerophysone A,9,19-cycloart-7β,24β,25-triol-1-en-3-one,was isolated from the ethanol extract of Sphaerophysa salsula DC.The structure was elucidated on the basis of spectral evidences and confirmed by X-ray analysis,the stereochemistry of the compound was also defined by X-ray analysis.     

A new stochastic method of reconstructing porous media

We present a new stochastic method of reconstructing porous medium from limited morphological information obtained from two-dimensional micro- images of real porous medium. The method is similar to simulated annealing method in the capability of reconstructing both isotropic and anisotropic structures of multi-phase but differs from the latter in that voxels for exchange are not selected completely randomly as their neighborhood will also be checked and this new method is much simpler to implement and program. We applied it to reconstruct real sandstone utilizing morphological information contained in porosity, two-point probability function and linear-path function. Good agreement of those references verifies our developed method’s powerful capability. The existing isolated regions of both pore phase and matrix phase do quite minor harm to their good connectivity. The lattice Boltzmann method (LBM) is used to compute the permeability of the reconstructed system and the results show its good isotropy and conductivity. However, due to the disadvantage of this method that the connectivity of the reconstructed system’s pore space will decrease when porosity becomes small, we suggest the porosity of the system to be reconstructed be no less than 0.2 to ensure its connectivity and conductivity.     

基于椭圆型方程的扭叶片造型方法的研究

本文以偏微分方程造型为基础,提出了一种基于椭圆型方程的扭叶片三维型面直接设计方法,详细推导了叶型曲面函数,给出了型面方程的求解及其前后缘修正。该方法具有设计叶型曲面自然光顺,设计参数少且各参数具有明显的几何意义,叶型曲面调整方便,利于采用非数值优化算法对其进行气动优化等优点。文中给出了设计实例,并通过数值实验分析了所设计叶片型面的流动特性。分析结果表明设计叶片具有良好的气动性能,同时也证明了本文提出的基于椭圆型方程的扭叶片三维型面设计方法的可靠性和实用性。     

CFD在燃煤细粒子凝聚过程中的应用

燃煤产生的细粒子富集了大量的有毒痕量元素,对大气环境和人类健康造成严重危害。本文针对燃煤细粒子的形成过程,在计算流体力学(CFD)的基础上,结合气溶胶动力学理论,模拟了烟气中细粒子在圆柱形流场中由于碰撞而凝聚的过程,并通过计算结果分析细粒子颗粒特征参量(速度、质量、直径和颗粒数目)随流场的变化趋势,为深入研究燃煤细粒子的形成演化机理提供理论基础。