一种改进的计算探测器校正因子的相关抽样方法

对于小尺寸探测器处于大块介质的情形, 在探测器的校正因子的Monte Carlo模拟中, 存在两个难题: 一是由于探测器尺寸很小粒子难以到达探测器并发生碰撞; 二是两个随机变量比值难以达到要求精度. 本文使用经过改进的粒子碰撞自动重要抽样方法, 再结合相关抽样方法, 解决了这两个难题, 并在MCNP-4C程序平台上加以实现. 除了粒子碰撞自动重要抽样以外, 还选用了其他3种方法: 直接模拟、区域分裂、强迫碰撞+Dxtran球分别与相关抽样方法结合, 对一个简化的探测器校正因子计算模型进行了计算. 实际计算结果表明, 相关抽样方法无论与哪种方法结合, 都起到了提高相关量计算效率的作用; 而它与粒子碰撞自动重要抽样结合, 比其他方法具有明显的优越性.     

Structural and magnetic properties of RF sputtered FePt/Fe multilayers

Series of [FePt(4min)/Fe(t_Fe)]₁₀ multilayers have been prepared by RF magnetron sputtering and post-annealing in order to optimize their magnetic properties by structural designs. The structure, surface morphology, composition and magnetic properties of the deposited films have been characterized by X-ray diffractometer (XRD), Rutherford backscattering (RBS), scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX) and vibrating sample magnetometer (VSM). It is found that after annealing at temperatures above 500 °C, FePt phase undergoes a phase transition from disordered FCC to ordered FCT structure, and becomes a hard magnetic phase. X-ray diffraction studies on the series of [FePt/Fe]_n multilayer with varying Fe layer thickness annealed at 500 and 600 °C show that lattice constants change with Fe layer thickness and annealing temperature. Both lattice constants a and c are smaller than those of standard ones, and lattice constant a decreases as Fe layer deposition time increases. Only a slight increase in grain size was observed as Fe layer decreased in samples annealed at 500 °C. However, the increase in grain size is large in samples annealed at 600 °C. The coercivities of [FePt/Fe]_n multilayers decrease with Fe layer deposition time, and the energy product (BH)_max reaches a maximum in the samples with Fe layer deposition time of 3 min. Comparison of magnetic properties with structure showed an almost linear relationship between the lattice constant a and the coercivities of the FePt phase.     

雷达目标特征提取的一种方法

将小波变换和马氏距离相结合，提出了一种基于ISAR成像的雷达目标特征提取方法。对ISAR成像数据进行正交二进Symlet小波分解和门限处理，对数据进行压缩，然后计算压缩后坐标点的马氏（Mahalanobis)距离，得到目标稳定的特征向量。由实验结果看出，此向量具有在一定范围内的不变性，能够用于雷达目标识别。     

束流测量中的工频陷波器

提出了一种应用于电子束曝光机束流测量中的自动跟踪工频陷波器，给出电路结构，基于对其工作原理的分析，介绍了提高陷波器跟踪精度的设计要点及调试方法。     

A complete global solution to the pressure gradient equation

We study the domain of existence of a solution to a Riemann problem for the pressure gradient equation in two space dimensions. The Riemann problem is the expansion of a quadrant of gas of constant state into the other three vacuum quadrants. The global existence of a smooth solution was established in Dai and Zhang [Z. Dai, T. Zhang, Existence of a global smooth solution for a degenerate Goursat problem of gas dynamics, Arch. Ration. Mech. Anal. 155 (2000) 277-298] up to the free boundary of vacuum. We prove that the vacuum boundary is the coordinate axes.     

基于频域方法的三维物体分层重现

基于频域方法实现了数字记录和再现三维物体离轴全息图.通过频谱对应关系求得各个面的频谱分布,使用数字滤波方法,成功地消除了零级衍射和共轭像;通过改变再现距离,分别获取了三维物体各个截面的再现像.     

基于VAGUE集多准则决策的模糊TOPSIS方法

给出了V AGUE集之间距离的新定义,在此基础上,提出一个基于V AGUE集多准则决策的模糊TOP-S IS方法,它为决策系统提供了一个有用的工具,并通过例子阐明本文方法的有效性.     

19F+27Al耗散反应中双核系统的转动与形变

测量了¹⁹F+²⁷Al耗散反应产物B,C,N,O,F和Ne的激发函数,入射束流的能量从110.25MeV到118.75MeV, 能量步长为250keV. 从产物的 能量自关联函数中提取了反应中所形成的中间双核系统的转动惯量, 与相粘模型计算的刚体转动惯量相比较, 结果表明形成的双核系统有大的形变.     

元回归模型中最大值点的BRPA估计的收敛速度

BRPA估计是Changchien (1990)提出的一种具有良好性质的回归函数最大值点的估计, Chen, Huang and Huang (1996), Bai and Huang (1999), 吴and王(2000)和Bai, Chen and Wu (2003)分别讨论了BRPA的极限性质\bd 本篇文章中, 我们在很一般的条件下研究了$x$为多维向量时BRPA估计的收敛速度, 推广了Bai, Chen and Wu (2003)的结果