偏振光干涉法消除光纤光栅解调中的交叉敏感现象

提出一种偏振光干涉的光纤光栅应变测量方法,该方法能解决光纤光栅应变和温度测量时的交叉敏感问题。对于钒酸钇晶体偏振光干涉仪,如果选择两个能使干涉仪产生180°相位差的不同中心波长的光纤光栅,一个用于应变测量,一个用于补偿温度,就能很好地解决光纤光栅应变测量时的温度交叉敏感问题。分析了构成偏振光干涉仪的晶体的厚度对应变偏差的影响。理论计算和试验结果显示,当晶体厚度为0.5 mm时温度对应变测量的交叉敏感现象被压缩到了1.6%,相当于0.13με/℃。进一步的仿真分析发现当晶体厚度为0.1 mm时交叉敏感现象将被压缩到0.08%,相当于0.0067με/℃。小的晶体厚度有利于减小交叉敏感现象,但小厚度的晶体加工困难,为此分析了双晶体结构的方案。     

高折射率椭圆芯布拉格光纤的偏振特性

应用带完全匹配层边界条件的全矢量有限元方法,分析了高折射率椭圆芯布拉格光纤的偏振特性,详细讨论了光纤结构参量对模式双折射度以及群速度走离的影响,结果发现:高折射率椭圆芯布拉格光纤的模式双折射度可达10-2量级,比传统保偏光纤至少高出一个量级,并且表现出不同于传统保偏光纤的群速度走离特性;在保持较高双折射度的同时,通过合理的结构设计,可在一定的波长处灵活地获得较大的群速度走离或零走离特性,具有重要的潜在应用价值;最后,简要分析了低折射率区域的折射率变化对偏振特性的影响;研究结果有助于设计高性能的微结构保偏光纤。     

Multilayer Porous Vanadium Nitride Microsheets Anodes for Highly Stable Na-ion Batteries

Sodiumion batteries(SIBs)have attracted intensive attention as promising alternative to lithium-ionbatteries(LIBs)for large scale energy storage systems because of low cost of sodium,similar energy storage mechanism and the reasonable performance.However,it is still a great challenge to search and design a robust structure of anode materials with excellent cycling stability and high rate capability for SIBs.Herein,multilayer porous vanadium nitride(VN)microsheets are synthesized through a facile and scalable hydrothermal synthesis-nitrogenization strategy as an effective anode material for SIBs.The multilayer porous VN microsheets not only offer more active sites for fast Na+insertion/extraction process and short diffusion pathway,but also effectively buffer the volume change of anode due to more space in the multilayer porous structure.The large proportions of capacitive behavior imply that the Na+charge storage depends on the intercalation pseudocapacitive mechanism.The multilayer porous VN microsheets electrodes manifest excellent cycling stability and rate capability,delivering a discharge capacity of 156.1 mA·h/g at 200 mA/g after 100 cycles,and a discharge capacity of 111.9 mA·h/g at 1.0 A/g even after 2300 cycles with the Coulombic efficiency of nearly 100%.     

测风激光雷达中F-P标准具的分析及性能检测

基于双边缘技术的测风激光雷达中,多普勒频移由高分辨率的F—P标准具检测得到。数值计算了存在各种缺陷的标准具响应曲线,分析了入射光束发散角、表面质量以及平行度对透过率谱宽的影响。用等厚干涉的方法测量了标准具双通道的腔长差值和表面质量。在窄带和宽带光源照射下,分别测量了标准具双通道的透过率曲线。长期测量（22天）的系统误差为0．42～0．85m／s。     

弹载红外图像实时编码器的设计

设计了适用于某型号导弹红外图像实时传输系统的关键部件图像数据编码器。为保证编码器的各项性能指标达到弹载设备的严格要求,本文重点在体系结构设计、芯片选型、PCB设计、系统抗干扰能力增强等几方面采取了多项针对性措施。设计与测试结果表明,该编码器结构简单,体积小,质量轻,功耗低,满足导弹研制任务对图像编码分系统各项指标要求。在工程实用中,该编码器性能稳定,工作可靠。     

Simultaneous Determination of Seven Lipophilic and Hydrophilic Components in Salvia miltiorrhiza Bunge by LC-MS/MS Method and Its Application to a Transport Study in a Blood-Brain-Barrier Cell Model

Salvia miltiorrhiza Bunge (SM) has been extensively used in Alzheimer’s disease treatment, the permeability through the blood-brain barrier (BBB) determining its efficacy. However, the transport mechanism of SM components across the BBB remains to be clarified. A simple, precise, and sensitive method using LC-MS/MS was developed for simultaneous quantification of tanshinone I (TS I), dihydrotanshinone I (DTS I), tanshinone IIA (TS IIA), cryptotanshinone (CTS), protocatechuic aldehyde (PAL), protocatechuic acid (PCTA), and caffeic acid (CFA) in transport samples. The analytes were separated on a C18 column by gradient elution. Multiple reaction monitoring mode via electrospray ionization source was used to quantify the analytes in positive mode for TS I, DTS I, TS IIA, CTS, and negative mode for PAL, PCTA, and CFA. The linearity ranges were 0.1–8 ng/mL for TS I and DTS I, 0.2–8 ng/mL for TS IIA, 1–80 ng/mL for CTS, 20–800 ng/mL for PAL and CFA, and 10–4000 ng/mL for PCTA. The developed method was accurate and precise for the compounds. The relative matrix effect was less than 15%, and the analytes were stable for analysis. The established method was successfully applied for transport experiments on a BBB cell model to evaluate the apparent permeability of the seven components.     

Effects of MN4-Type Coordination Structure in Metallophthalocyanine for Bio-Inspired Oxidative Desulfurization Performance

Oxidative desulfurization (ODS) is the promising new method for super deep desulfurization of fuel oil. The oxidative desulfurization performance of the metal-N₄-chelates metallophthalocyanines (MPcs) is related to the chemical properties of conjugate structures and the central metal ions. Herein, a biomimetic catalytic system composed of metallophthalocyanines (MPcR₄, M = Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II); R = -H, -COOH, -NO₂, -NH₂) and molecular O₂ was performed to study the influence of MN₄-type coordination structure in metallophthalocyanines for the degradation of dibenzothiophene (DBT) in model oil containing n-octane. The results reveal that the conjugate structures and the center metal ions of metallophthalocyanines played key roles in oxidative desulfurization performance. The inductive effect of different R substituents strongly affected the electron cloud distribution of the conjugate structures and the catalytic performance. Moreover, the catalytic activity of MPcs, which is related to the d electronic configuration and ligand-field effects, does not sequentially increase with the increase in the d electron number of central metal ions.     

Unravelling the Helianthus tuberosus L. (Jerusalem Artichoke,Kiku-Imo) Tuber Proteome by Label-Free Quantitative Proteomics

The present research investigates the tuber proteome of the ‘medicinal’ plant Jerusalem artichoke (abbreviated as JA) (Helianthus tuberosus L.) using a high-throughput proteomics technique. Although JA has been historically known to the Native Americans, it was introduced to Europe in the late 19th century and later spread to Japan (referred to as ‘kiku-imo’) as a folk remedy for diabetes. Genboku Takahashi research group has been working on the cultivation and utilization of kiku-imo tuber as a traditional/alternative medicine in daily life and researched on the lowering of blood sugar level, HbA1c, etc., in human subjects (unpublished data). Understanding the protein components of the tuber may shed light on its healing properties, especially related to diabetes. Using three commercially processed JA tuber products (dried powder and dried chips) we performed total protein extraction on the powdered samples using a label-free quantitate proteomic approach (mass spectrometry) and catalogued for the first time a comprehensive protein list for the JA tuber. A total of 2967 protein groups were identified, statistically analyzed, and further categorized into different protein classes using bioinformatics techniques. We discussed the association of these proteins to health and disease regulatory metabolism. Data are available via ProteomeXchange with identifier PXD030744.     

高活性固载化三氯化铝催化合成金刚烷

首次用固载化AlCl3催化剂催化桥式四氢双环戊二烯异构化反应合成金刚烷.结果表明,以γ-Al2O3为载体的固载化AlCl3催化剂在较低的反应温度(140℃)下具有较高的催化活性和生成金刚烷的选择性,桥式四氢双环戊二烯的转化率达到100%,金刚烷的选择性为17.7%;而以Si O2作为载体制备的催化剂,几乎没有金刚烷生成.     

混合发射天线选择的闭环发射分集系统的优化设计

研究了混合发射天线选择技术的闭环发射分集系统.针对最大率传输和等增益传输两种传输模式,根据信道矢量衰落损耗系数的排序统计分布特性,分别提出了发射天线数和射频链路数的选择算法.这两个算法可分别使系统所需的发射天线数和射频链路数最小.仿真结果显示合理地选择发射天线数和射频链路数可以大大简化系统的复杂度,减少不必要的开销.针对混合发射天线选择的等增益传输提出了相位扇区化量化算法.这种算法只需少量的量化反馈就可以使系统的性能接近全反馈情况.