Blood cell counting based on U-Net++ and YOLOv5

Clinical information about a variety of disorders is available through blood cell counting, which is usually done by manual methods. However, manual methods are complex, time-consuming and susceptible to the subjective experience of inspectors. Although many efforts have been made to develop automated blood cell counting algorithms, the complexity of blood cell distribution and the highly overlapping nature of some red blood cells (RBCs) remain significant challenges that limit the improvement of analytical accuracy. Here, we proposed an end-to-end method for blood cell counting based on deep learning. Firstly, U-Net++ was used to segment the whole blood cell image into several regions of interest (ROI), and each ROI contains only one single cell or multiple overlapping cells. Subsequently, YOLOv5 was used to detect blood cells in each ROI. Specifically, we proposed several strategies, including fine classification of RBCs, adaptive adjustment for non-maximal suppression (NMS) threshold and blood cell morphology constraints to improve the accuracy of detection. Finally, the detection outcomes for each ROI were combined and superimposed. The results show that our method can effectively address the issue of high overlap and precisely segment and detect blood cells, with a 98.18% accuracy rate for blood cell counting.     

小型化低功耗机载显示器图形系统设计与实现

为了满足机载显示器图形生成系统的小尺寸、低功耗需求,提出了一种基于龙芯2K1000的全国产图形生成与处理方案。该方案以2K1000为核心构建硬件平台,使用2K1000内部集成的中央处理器、图形处理器、显示控制器,以及外部的内存实现图形的计算生成和双缓存显示,配合国产可编程逻辑器件实现图形与外视频的叠加显示及机载通信总线扩展。软件上采用航空专用的国产天脉操作系统,基于天脉操作系统设计了关键的图形显示驱动、帧存驱动、显示控制器驱动。实验结果表明,在输出1 024 pixel×768 pixel分辨率显示时,典型机载图形画面帧率达到35 frame/s,整体功耗约10 W。该方案扩展性强、功耗低,满足实时显示需求,在机载显示器领域有着广泛的应用空间。     

电磁散射特征提取与成像识别算法综述

合成孔径雷达(SAR)图像的自动化解译是合成孔径雷达技术应用的重要发展方向之一。电磁散射特征与目标结构具有稳健的关联性,是SAR图像解译的关键支撑。近年来,如何准确地实现电磁特征提取以及利用电磁特征反演目标特性受到了广泛的重视。该文讨论了电磁特征提取和基于电磁散射特征识别方法的研究成果,总结归纳了其中的关键要素和主要思路,详述了电磁散射机理在成像和识别领域的扩展应用,展望了未来电磁散射特征提取与应用的研究发展趋势。      

Upconversion fluorescence modulation of CaTiO3:Yb3+/ Er3+ nanocubes via Zn2+ introduction

rials, CaTiO3:Yb3+/Er3+/Zn2+ nanocubes with uniform size were prepared by solvothermal method in this paper. They were respectively characterized by X-ray diffractometer (XRD), scanning electron microscope (SEM), photoluminescence (PL) spectroscopy and their fluorescence lifetimes. The results show that the average size of the nanocubes is about 550 nm×650 nm×850 nm with good upconversion luminescence (UCL) properties. Under 980 nm laser excitation, the effects of the ratio between activator Er3+ and sensitizer Yb3+ and Zn2+ doping on the upconversion fluorescence properties were investigated, and the optimal ion ratio was obtained. The results of steady-state spectra show that the strongest fluorescence intensity of CaTiO3:Yb3+/Er3+ was obtained with the addition of 10 mol% Zn2+ at a Yb3+/Er3+ molar doping ratio of 3:0.3, which was attributed to the crystal field asymmetry generated by the introduction of Zn2+ ions. The energy transfer and upconversion mechanism between Yb3+ and Er3+ ions in CaTiO3 nanocubes were investigated by analyzing the upconversion fluorescence kinetics.     

基于激光自混合干涉调频信号的位移测量实验

激光自混合干涉在高精度测量领域发挥着越来越重要的作用,微位移测量已应用于大型土木结构、航空航天、健康监测等。传统测量以调幅信号为主,但随着噪声加强,测量误差越来越大,甚至难以测量。为此,采用马赫-曾德尔干涉仪,实现了调幅/调频信号转换。针对大噪声环境下的调频信号,利用多次希尔伯特变换进行相位解卷,实现了原始信号的重构。数值仿真结果证明了该方法的有效性,在10 dB白噪声环境中,系统的信噪比为10.0614 dB,估计误差为0.0614 dB。实验结果表明,微位移重构的误差在100 nm以内,且调频信号的信噪比远高于调幅信号。该方法适用于超精密测量,且在大噪声环境下仍具有较高的信噪比。     

透明吸波体综述北大核心CSCD

吸波体是一种带有损耗特性的周期结构,能够吸收电磁波,将电磁能转化为热能,降低反射的电磁波能量。随着应用场景的特殊化,吸波体朝着特殊领域、特定功能、更具针对性的方向发展。由于各类含有光学窗口的应用环境对抗电磁干扰需求的不断提高,吸波体光学透明化成为研究的重点方向。为了对透明吸波体的发展状况有系统的认识,文章以制造材料为脉络梳理了近年来可见光透明吸波体的研究现状,包括氧化铟锡(ITO)、金属网栅、石墨烯等,综述了以它们为材料制备的透明吸波体优缺点以及发展趋势,最后对透明吸波体的未来发展进行了展望。     

跨谱段SAR散射中心多维参数解耦和估计方法

微波光子雷达发射大带宽跨谱段的信号,为目标的精细电磁特性描述和准确识别提供基础的同时,也亟需与之相应的大带宽大转角情况下的电磁模型参数提取方法.相比窄带条件,跨谱段信号数据量大,所含物理量信息维度高且复杂,大转角情况下距离和方位向耦合.该文提出跨谱段SAR散射中心多维参数解耦和估计方法,首先结合极坐标格式算法(PFA)和属性散射中心模型构造2维解耦波数域散射中心模型,再结合坐标下降法(CDA)将复杂的高维耦合参数估计方法简化为循环迭代的1维参数估计方法,有效降低字典维度和估计复杂度,并引入Hooke-Jeeves算法提高估计精度.最后根据各个散射中心的参数估计结果对它们的结构和位置进行识别,对仿真数据的处理实验验证了该文方法的有效性.