Image guide couplers with dielectric coupling elements and radiation reduction

Directional couplers in image guide technique for millimeter-wave circuits are discussed, and steps to improve their properties are demonstrated. The simple two-line-9 dB coupler with periodical coupling is compared to a design with an intermediate dielectric coupling element to reduce the frequency dependence. Radiation from the waveguide bends can be reduced significantly by inserting absorber materials at critical points. Experimental results for a-3 dB coupler are also given.     

HCN laser scattering on the JIPP T-IIU tokamak

A 4-channel HCN laser scattering system has been developed and applied to the JIPP T-IIU tokamak. Main aim of this system is to study microturbulence excited in the plasma, especially in the high power ICRF heating experiment. The observed density fluctuations are in a frequency range of the electron diamagnetic drift wave and have broad frequency spectra. The main part of the wavenumber is found to satisfy the condition of . In the heating experiments, deterioration of the energy confinement time is observed, and the density fluctuation level increases with the increase of the heating power.     

多目标多约束的集成电路统计优化策略

对于集成电路设计、生产过程中的多目标、多约束统计优化问题,本文提出了“合格率足够高”的优化宗旨,并从概率论的基本原理出发,结合集成电路的特点,导出了一种合格率的近似表述方法,提出的变权重Monte Carlo法编程简便,效率高。采用这些优化策略设计的集成电路合格率优化系统取得了比较好的结果。     

曝光数据流优化问题的蒙特卡罗算法

集成工艺中控制图形发生器产生掩模图形的数据流文件的数据排列顺序优化,是一个其结点数可达数千个之多的大规模旅行商问题(从镜头架的位置,即每个矩形的矩心为结点),常规算法早已不适用。本文采用多阶段蒙特卡罗算法并加以改进,补充了“分层优化模式”,邻接结点的预合并和在各个阶段末提取共同子路径并删去相关结点等一系列逐步缩小问题规模的措施,形成了一个实用的优化算法。相应的软件已成功地应用于薄膜磁头的数据流文件的优化。     

Multidimensional fourier transforms by systolic architectures

In this paper, time-efficient systolic and semi-systolic architectures for the implementation of multidimensional DFTs are proposed that allow modularity and easy expansibility while keeping throughput independent of the dimension of the DFT. We shall call an array semi-systolic if the input data is to be preloaded into every cell of the array or if the output data can be calculated not only in the boundary cells of the array. DFT algorithms are represented by FORTRAN-like code, in order to explicitly display the suggested rotational transformations in the index space. After the transformation, multidimensional DFT algorithm can be mapped onto a systolic structure. The area-time² complexity of the proposed design is within logk factor of the lower bound for ak-point DFT (AT ²=(k ² log² k)), i.e. equals 0(k ² log³ k)=0(N ^2M log³ N) fork=N ^2M point DFT;A is the area complexity andT is the system throughput.     

DDFSGEN

This paper presents a functional compiler for the automatic design of Direct Digital Frequency Synthesizer (DDFS) integrated circuits (ICs) using a ROM based table look-up architecture. The compiler allows the user to specify high-level specifications such as the acceptable spurious response and it generates the IC architecture, floorplan, and layout. To construct the layout for different specifications, a library of parameterized macrocells has been developed in 1.2 m CMOS technology.A test chip with a quadrature DDFS module has been generated, using the compiler, and fabricated. The chip has two input signals: one is for frequency control while the other is for phase initialization. Input and output word lengths are 16 bits and 6 bits respectively. The chip complexity is approximately 12,000 transistors (DDFS core) and the die size is 4.8×2.9mm ². A maximum sample rate of 80 MHz has been attained implying a maximum sine (cosine) output frequency of 40 MHz and a frequency resolution of 1.22 kHz. The maximum spurious level measured is –46 dB.     

Magnetic resonance in amorphous metals based on Fe in the millimeter radiowave range

The research technique of amorphous magnetics is described. The paper gives the experimental data obtained by a multifunctional low-temperature radiospectrometer Buran in the mm radiowave range and presents their analysis.     

Far infrared absorption spectra of amorphous (As2S3)?(Sb2S3) semiconductors and the spatial charge fluctuation

Far infrared absorption spectra of amorphous (As₂S₃)_1–x(Sb₂S₃)_x system (x=0.00.6) were measured in the wavenumber region 725 cm^–1 with Lamellar grating far infrared Fourier Transform Spectrometer, and the spatial fluctuation of charges and its correlation range were estimated with charge fluctuation model. The charge fluctuation of (As₂S₃)_1–x(Sb₂S₃)_x system increases with Sb₂S₃ concentration x. On the other hand, the correlation length of the charge fluctuation decreases from 7 A to 4.5 A with an increase in x. As a result, it can be found that the medium range order of As₂S₃ changes drastically with an incease in Sb₂S₃ concentration x.     

An experimental investigation of high permittivity dielectric resonators for millimeter-wave microstrip components

This paper proposes a new type of high permittivity whispering gallery mode cylindrical dielectric resonators with a geometry which is very suitable for use in microstrip type integrated circuits. These oversized resonators, together with high Q factors and ease of fabrication, are potentially interesting for millimeter wave integrated filters and oscillators. In this paper, we report an experimental investigation of such resonators carried out in Ka band (26.5–40 GHz). Measured results including resonant frequencies and loaded quality factors will be presented. Application to millimeter wave filters will also be demonstrated.     

Large area bolometers for millimeter-wave power calibration

An accurate monolithic power meter has been developed for millimeter-wave applications. The detector is a large-area Bismuth bolometer, integrated on a fused-Quartz substrate. It simply measures the temperature change caused by the absorption of millimeter-wave radiation. The power meter is simple to fabricate, inexpensive, and can be easily calibrated using a low-frequency network. The measured responsivity for a 50 bolometer, with an area of 1×1cm, at a bias of 1V. and a video modulation of 100Hz, is 1mV/W. The noise spectrum exhibits a 1/f rolloff till 1KHz, and is limited by the Johnson noise for higher frequencies. The NEP of the detector is 3WHz^–1/2 at a video modulation of 1KHz. It is possible to decrease the current NEP by fabricating bolometers with higher responsivities. Possible application areas are absolute power calibration and localized power density measurements at millimeter and submillimeter wavelengths.