Threshold voltage uniformity and characterization of microwaveperformance for GaAs/AlGaAs high electron-mobility transistors grown onSi substrates

We report on DC and microwave characteristics for high electron-mobility transistors (HEMT's) grown on Si substrates by metal-organic chemical vapor deposition (MOCVD). Threshold voltage (V _th) distribution in a 3-in wafer shows standard deviation of V_th (σV_th) of 36 mV with V_th of -2.41 V for depletion mode HEMT's/Si and σV_th of 31 mV with V_th of 0.01 V for enhancement mode, respectively. The evaluation of V_th in a 1.95×1.9 mm² area shows high uniformity for as-grown HEMT's/Si with σV_th of 9 mV for V_th of -0.10 V, which is comparable to that for HEMT's/GaAs. Comparing the V_th distribution pattern in the area with that for annealed HEMT's/Si, it is indicated that the high uniformity of V_th is obtained irrelevant of a number of the dislocations existing in the GaAs/Si. From microwave characteristic evaluation for HEMT's with a middle-(10~50 Ω·cm) and a high-(2000~6000 Ω·cm) resistivity Si substrate using a new equivalent circuit model, it is demonstrated that HEMT's/Si have the disadvantage for parasitic capacitances and resistances originated not from the substrate resistivity but from a conductive layer at the Si-GaAs interface. The parasitic parameters, especially the capacitances, can be overcome by the reduction of electrode areas for bonding pads and by the insertion of a dielectric layer under the electrode, which bring high cut-off frequency (f_T) and maximum frequency of operation (f_max) of 24 GHz for a gate length of 0.8 (μm). These results indicate that HEMT's/Si are sufficiently applicable for IC's and discrete devices and have a potential to be substituted for HEMT's/GaAs     

Bandwidth renegotiation for VBR video over ATM networks

A scheme for delivery or variable bit-rate (VBR) video over asynchronous transfer mode (ATM) networks where bandwidth can be renegotiated during the duration of a call between the video source and the network is considered. Renegotiation can be initiated by either the video source or the network. The video bandwidth requirement is characterized by a usage parameter control (UPC) consisting, in general, of peak rate, burst length, and sustained rate. A baseline design is outlined where rate-control adjusts the source's rate while a new UPC is requested from the network. When granted, the new UPC allows the source to maintain its target quantization and delay requirements. Rate control epochs may be extended when the network blocks UPC requests or sets a lower UPC value to temporally deal with congestion. Simulation results are presented for VBR MPEG video. The results show that with a moderate renegotiation rate the scheme tracks the bandwidth requirements of the source. As a result, the video quality and bandwidth efficiency can be maintained     

New multifunction filter using an inverting CCII and a voltagefollower

A new multifunction filter using minimum components is presented. This filter which possesses single input and four outputs can simultaneously generate second-order highpass, bandpass, and lowpass filtering functions at individual output terminals. The filter has the following merits; it uses only two grounded capacitors which makes it suitable for integrated circuit implementation, no matching condition is required, offering multifunction outputs and has low passive and active sensitivities. Experimental results agree very well with the theoretical result     

Reduction of the off-state current of polysilicon thin-filmtransistors by means of a polysilicon buffer layer

The off state current for polysilicon thin-film transistors for pixels in LCDs has been successfully reduced by introducing a polysilicon buffer layer between a polysilicon active layer fabricated by solid-phase-crystallisation (SPC) and a fused quartz substrate. Off-slate current of less than 1 pA under V_gs=-25 V at V_ds=3 V was obtained for n-channel single-gate coplanar transistors using the buffer layer (400 Å)     

Frequency control techniques in coherent multichannel LAN's

This paper describes frequency control techniques for cold start and channel recognition functions in coherent multichannel local area networks. A Z-cut quartz etalon can be used to stabilize the optical transmitter frequencies. The capture range and the influence of humidity on a Fabry-Perot etalon are discussed. The frequency deviation of the optical transmitter was estimated to be less than ±1 GHz in the long term. A double AFC loop has been proposed for local LD frequency control. It showed a wide capture range of ±100 GHz. Coherent FDM receiver switching to the desired channel was demonstrated over a range from 0 to 40°C in an experiment     

Explicit Ziv-Zakai lower bound for bearing estimation

The extended Ziv-Zakai bound for vector parameters is used to develop a lower bound on the mean square error in estimating the 2-D bearing of a narrowband planewave signal using planar arrays of arbitrary geometry. The bound has a simple closed-form expression that is a function of the signal wavelength, the signal-to-noise ratio (SNR), the number of data snapshots, the number of sensors in the array, and the array configuration. Analysis of the bound suggests that there are several regions of operation, and expressions for the thresholds separating the regions are provided. In the asymptotic region where the number of snapshots and/or SNR are large, estimation errors are small, and the bound approaches the inverse Fisher information. This is the same as the asymptotic performance predicted by the local Cramer-Rao bound for each value of bearing. In the a priori performance region where the number of snapshots or SNR is small, estimation errors are distributed throughout the a priori parameter space and the bound approaches the a priori covariance. In the transition region, both small and large errors occur, and the bound varies smoothly between the two extremes. Simulations of the maximum likelihood estimator (MLE) demonstrate that the bound closely predicts the performance of the MLE in all regions     

Vortices with fractional circulation quantum in superfluid He---A2

Due to the specific discrete symmetry of the superfluid ³He---A₂ order parameter, linear singularities can exist which are characterized by a quarter-integer quantum of superflow velocity circulation. Some consequences of this observation are analyzed.     

Use of reference materials in coastal monitoring quality assurance

The NOAA National Status and Trends (NS&T) Program determines the current status of, and changes over time in the environmental health of U.S estuarine and coastal waters. Concentrations of organic and inorganic contaminants are determined in bivalves, bottom-dwelling fish and sediments. The quality of the analytical data generated by the NS&T Program is over-seen by the performance-based Quality Assurance Project, which is designed to document sampling protocols, analytical procedures, and laboratory performance, and to reduce intralaboratory and interlaboratory variation. All NS&T cooperating laboratories are required to participate in yearly intercomparison exercises. The analysis of reference materials, such as the National Research Council of Canada's Certified Reference Materials (CRMs) and National Institute of Standards and Technology's (NIST) Standard Reference Materials (SRMs), and of control materials, is required. Because of the need for marine matrix reference materials and standards, NOAA contributed to the production of eight NIST SRMs and seven internal standard solutions. Analytical data from all control materials and all matrix reference materials are reported to the Program office.     

Analysis and optimization of waveguide multiapplicator hyperthermiasystems

A method is proposed for determining the excitation coefficients of an antenna array operating in a large rectangular waveguide and used as a hyperthermia system. The excitation coefficients of the array elements are optimized for attaining an improved specific absorption rate (SAR) distribution around a deep-seated tumor. The method is applied to a two-dimensional problem of a piecewise homogeneous post in a waveguide representing a section of the human torso. The array is operating below the cutoff frequency of the dominant mode of the waveguide. Numerical simulations have been performed to check the effectiveness of this approach. The results show that by using the proposed optimization method, SAR distributions can be improved