Method for preventing delay ambiguity

A detection error mechanism termed delay ambiguity is identified as one of the main causes of the irreducible bit error rate observed for data detection over fast fading communication channels. A periodic sequence of phase rotations applied to the phase shift keyed (PSK) transmit data symbols is proposed to prevent this type of detection error     

Forced-air precooling of spherical foods in bulk: A parametric study

In this paper, a mathematical model for forced-air precooling of spherical food products in bulk is developed. The foods are arranged in horizontal layers stacked one above the other to form a rectangular parallelepiped with a vertical gap in between the product layers. The foods are cooled by chilled air blown along the height of the package. The governing equations for the conduction heat transfer in the foods, simultaneous heat and mass transfer at the food-air interface and in the air stream are solved numerically using finite-difference methods. A comprehensive numerical study is performed by varying the process parameters over a wide range. Typical results showing the variation of moist air properties along the height of the package and the effect of each parameter on the process time are presented. The ranges of parameters for advantageous operation of the precooling system are identified. Correlations are obtained for the process time based on the product center and mass-averaged temperatures in terms of process parameters.     

Positron annihilation in polycrystalline metals

The empirical relation θ _p ⁶ /I _p=aK (where θ _p is the limiting angle of the parabolic component in the angular distributions of annihilation photons in metals, I _p is the integrated contribution of this component, K=1, 2, 3, ... is an integer, and a is a constant independent of the type of metal) observed earlier has been tested on magnesium, aluminum, copper, zinc, lead, and bismuth samples. The validity of this relation has been substantiated. The value of the dimensionless constant a has been determined and was found to coincide within experimental error with the result obtained in previous measurements. It is shown that the value of K for the same metal but for different samples may be different. It is conjectured that this may be due to different defect concentrations in samples. Fiz. Tverd. Tela (St. Petersburg) 40, 600–602 (April 1998)     

The multiple-scale wave equation

An analytic and numerical study of the behavior of the linear nonhomogeneous wave equation of the form ε²u_tt = Δu + tf with high wave speed (ε 1) is carried out. This study was initially motivated by meteorological observations which have indicated the presence of large spatial scale gravity waves in the neighborhood of a number of summer and winter storms, mainly from visible images of ripples in clouds in satellite photos. There is a question as to whether the presence of these waves is caused by the nearby storms. Since the linear wave equation is an approximation to the full system describing pressure waves in the atmosphere, yet is considerably more tractable, we have chosen to analyze the behavior of the linear nonhomogeneous wave equation with high wave speed. The analysis is shown to be valid in one, two, and three space dimensions. Partly because of the high wave speed, the solution is known to consist of behavior which changes on two different time scales, one rapid and one slow. Additionally, because of the presence of the nonhomogeneous forcing term tf, we show that there is a component of the solution which will vary only on a very large spatial scale. Since even the linearized wave equation can give rise to persistent large spatial scale waves under the right conditions, the implication is that certain storms could be responsible for the generation of large-scale waves. Numerical simulations in one and two dimensions confirm analytic results.     

Experimental Determination of Four-Time Stimulated Echoes in Liquids, Colloidal Suspensions, and Crystals

Four-time stimulated echo experiments have been used to monitor the temporal evolution of the reorientation rates of deuterated molecules or colloidal suspensions. We present extended phase cycles for this seven-pulse experiment. In order to test its performance three vastly different materials are chosen. These include a crystal in which the molecules carry out well-defined 180° flips and a supercooled liquid characterized by a distribution of jump angles centered around 10°. As an example for rotational diffusion, data on a concentrated suspension of polystyrene spheres in a viscous medium are presented.     

Time-harmonic response of a vertical crack in plates

A technique for the characterization of an interior crack perpendicular to the surface of the plates is presented. A time-harmonic line load is applied on the upper surface of the plate. The scattered displacement field is calculated by using the strip element method. It is found that there are additional superimposed oscillations in the curve of the absolute values of the displacement in the region between the load and the crack. The mean value of the peaks of the additional oscillations increases with the crack length, and is less dependent on the distance from the load to the crack. The crack position is determined from the displacement distribution curve and the crack length is determined from the mean value of the peaks of the additional oscillations. Approximate polynomial formula of degree four for predicting the length of interior vertical cracks in isotropic homogeneous plates is also proposed. Numerical examples are given to demonstrate the present technique.     

Left versus right canonical Wiener-Hopf factorization and realization

For an arbitrary rational matrix function, not necessarily analytic at infinity, the existence of a right canonical Wiener-Hopf factorization is characterized in terms of a left canonical Wiener-Hopf factorization. Formulas for the factors in a right factorization are given in terms of the formulas for the factors in a given left factorization. All formulas are based on a special representation of a rational matrix function involving a quintet of matrices.     

Membrane introduction mass spectrometry

An overview of membrane introduction mass spectrometry (MIMS) is presented and comparisons are made with other direct sample introduction techniques. Special attention is given to the unique advantages and the limitations of newer variants on the MIMS technique, including affinity MIMS, reverse-phase and trap MIMS. The salient features of the interfaces used in MIMS are summarized and the various membrane materials commonly used are delineated. The applicability of MIMS is illustrated via discussion of

1. (i) bioreactor monitoring (represented by yeast fermentation),

2. (ii) environmental monitoring (illustrated by analysis of contaminated ground water samples) and

3. (iii) on-line chemical reaction monitoring (exemplified by the photolysis of aryl esters).

The applicability of MIMS to the analysis of environmental samples, including complex mixtures in water, air and soil, is noted.     

Low-temperature specific heat of crystalline and amorphous Eu2(MoO4)3

The specific heat C _total of crystalline and amorphous Eu₂(MoO₄)₃ is measured in the temperature interval 4.5–30 K. The amorphous state is obtained by applying pressure ∼7 GPa at room temperature. It is found that the specific heat of the crystal at T⩽7.5 K is described by a cubic function of temperature, while the specific heat of the amorphous sample has a strongly non-Debye character in the entire experimental temperature interval. The curve of C _total for amorphous europium molybdate is analyzed in a model of soft atomic potentials, and it is shown that it agrees well with universal low-temperature anomalies of the specific heat of classical glasses obtained by quenching from the liquid. Pis’ma Zh. éksp. Teor. Fiz. 68, No. 8, 623–627 (25 October 1998)     

Simplified 0.35-μm flash EEPROM process using high-temperatureoxide (HTO) deposited by LPCVD as interpoly dielectrics and peripheraltransistors gate oxide

A simplified flash EEPROM process was developed using high-temperature LPCVD oxide both as flash cells interpoly dielectrics and as peripheral transistors gate oxide (decoding logic). An O₂ anneal at 850°C lowers charge trapping and interface trap density induced by Fowler-Nordheim injection. However, electron trapping remains slightly higher than with dry thermal oxide. Similar memory charge loss and write-erase endurance are obtained as for ONO-insulated cells. HTO thus proves to have the required quality and reliability to be used in flash EEPROMs