On the thermal expansion of nanohole free volume in perfluoropolyethers

To determine the free volume in polymers, positron annihilation lifetime spectroscopy data are transformed into nanohole volumes by modeling the cavities as spheres or, more generally, using geometries assuming an isotropic thermal expansion. However, this guess could be unrealistic owing to the irregular shape of nanoholes and constrained movements of the macromolecules. In this work, it is shown that a comparison of hole-lattice theory with positron and dilatometric data for a homologous series of perfluoropolyethers supplies information on the anisotropic expansion of nanoholes; the relation between volume and typical unconstrained size of the cavities can be expressed by a power law with noninteger exponents.     

Influence of Jahn-Teller coupling on the magnetic properties of transition metal complexes with orbital triplet ground terms: magnetization and electronic Raman studies of the titanium(III) hexa-aqua cation

Magnetization and electronic Raman data are presented for salts of the type Cs[Ga:Ti](SO(4))(2) x 12H(2)O, which enable a very precise definition of the electronic structure of the [Ti(OH(2))(6)](3+) cation. The magnetization data exhibit a spectacular deviation from Brillouin behavior, with the magnetic moment highly dependent on the strength of the applied field at a given ratio of B/T. This arises from unprecedented higher-order contributions to the magnetization, and these measurements afford the determination of the ground-state Zeeman coefficients to third-order. The anomalous magnetic behavior is a manifestation of Jahn-Teller coupling, giving rise to low-lying vibronic states, which mix into the ground state through the magnetic field. Electronic Raman measurements of the 1%-titanium(III)-doped sample identify the first vibronic excitation at approximately 18 cm(-1), which betokens a substantial quenching of spin-orbit coupling by the vibronic interaction. The ground-state Zeeman coefficients are strongly dependent on the concentration of titanium(III) in the crystals, and this can be modeled as a function of one parameter, representing the degree of strain induced by the cooperative Jahn-Teller effect. This study clearly demonstrates the importance that the Jahn-Teller effect can have in governing the magnetic properties of transition metal complexes with orbital triplet ground terms.     

Imaging the activity of nitrate reductase by means of a scanning electrochemical microscope

Scanning electrochemical microscopy (SECM) was used to characterize immobilized nitrate reductase (NaR) from Pseudonomonas stutzeri (E.C. 1.7.99.4). Nitrate reductase with membrane fragment was embedded in a polyurethane hydrogel in a capillary and solubilized NaR without membrane fragment was covalently coupled to a diaminoethyl-cellulose-carbamitate film on glass. After systematic studies of possible mediators, SECM feedback imaging of both forms of immobilized NaR was accomplished with methylviologen as redox mediator.     

Electroviscous Effect in Dilute Suspensions of Alumina

A study on the electroviscous effect of alumina suspensions has been made. At the low volume fraction of the particles studied here only a first-order effect was detected. Ubbelohde-type capillary viscometers have been used. A simple method to determine the hydrodynamic constant k(1) has been proposed. The experimental primary electroviscous coefficients corresponding to different electrolyte concentrations have been compared with two different theoretical approachs (I. G. Watterson, and L. R. White, J. Chem. Soc. Faraday Trans. 2 77, 1115 (1981); F. J. Rubio-Hernández, E. Ruiz-Reina, and A. I. Gómez-Merino, J. Colloid Interface Sci. 206, 334 (1998)) and the results suggest that the presence of a dynamic Stern layer plays a certain role in this effect. Copyright 2000 Academic Press.     

Gas chromatography/negative-ion chemical ionisation mass spectrometry for the quantitative analysis of morphine in human plasma using pentafluorobenzyl carbonate derivatives

A sensitive and specific method for the quantitative determination of morphine in human plasma is presented. Morphine was extracted from plasma by solid phase extraction on C18 and converted to its pentafluorobenzyl carbonate trimethylsilyl derivative. The derivatives were analysed without further purification. Using gas chromatography/negative ion chemical ionisation mass spectrometry, a useful diagnostic fragment ion at m/z 356 is obtained at high relative abundance. Deuterated morphine was used as internal standard. Calibration graphs were linear within the range 1.25 to 320 nmol/L. Intra-day precision was 3.82% (15 nmol/L), 2.85% (75 nmol/L) and 4.13% (225 nmol/L), inter-day variability was found to be 1.77% (15 nmol/L), 4.95% (75 nmol/L) and 9.88% (225 nmol/L). Inter-day accuracy showed deviations of 2.18% (15 nmol/L), -0.72% (75 nmol/L) and -0.13% (225 nmol/L). The method is rugged and robust and has been applied to the batch analysis of morphine during pharmacokinetic profiling of the drug.     

Dynamics of charge transfer states on metal surfaces: the competition between reactivity and quenching

The dynamics of excited states of adsorbates on surfaces caused by charge transfer is studied. Both negative and positive charge transfer processes are possible. In particular we are interested in positive charge transfer from a metal surface to molecular or atomic oxygen adsorbed on the surface. Once the negatively charged oxygen on the surface loses an electron it becomes chemically activated. The ability of this species to react depends on the quenching time or back transfer. The analysis of these processes is based on a set of diabatic potential energy surfaces each representing a different charged oxygen species. The dynamics is followed by solving the multichannel time-dependent Schr?dinger equation or Liouville von Neumann equation. Due to the nonadiabatic character of these reactions large isotope effects are predicted.     

Cathodic and anodic stripping voltammetry: simultaneous determination of As-Se and Cu-Pb-Cd-Zn in the case of very high concentration ratios

Arsenic(III), selenium(IV), copper(II), lead(II), cadmium(II) and zinc(II) are determined in environmental matrices. The voltammetric measurements were carried out using a conventional three-electrode cell and the ammonia-ammonium chloride buffer pH 9.3 as supporting electrolyte. The analytical procedure was verified by the analysis of the standard reference materials Estuarine Sediment BCR-CRM 277 and River Sediment BCR-CRM 320. The precision, expressed as relative standard deviation (s(r)), and the accuracy, expressed as relative error, were, in all cases, less than 5%; the detection limits, for each element and in the experimental conditions employed, were around 10(-9) M. The standard addition technique significantly improved the resolution of the voltammetric method, even in the case of very high metal concentration ratios.     

Application of co-eluting structural analog internal standards for expanded linear dynamic range in liquid chromatography/electrospray mass spectrometry

Non-linear standard calibration curves occur frequently in liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS), necessitating the use of non-linear regression curve fitting or a reduction in assay dynamic range. Non-linearity can be minimized by the use of stable isotope internal standards, if the cause of curve bending is ionization saturation. Unfortunately, stable isotope internal standards can be difficult or expensive to synthesize. Structural analog internal standards, if sufficiently close to analytes both in chemical structures and HPLC retention times, may mimic the effect of stable isotope internal standards. Tentative experimental evidence supporting this concept is presented in this paper.     

Rupture of thin stagnant films on a solid surface due to random thermal and mechanical perturbations

A generalized formalism for the rupture of a nondraining thin film on a solid support due to imposed random thermal and mechanical perturbations, modeled as a Gaussian white noise, is presented. The evolution of amplitude of perturbation is described by a stochastic differential equation. The average film rupture time is the average time for the amplitude of perturbation to equal to the film thickness and is calculated by employing a first passage time analysis for different amplitudes of imposed perturbations, wavenumbers, film thickness, van der Waals and electrostatic interactions and surface tensions. The results indicate the existence of an optimum wavenumber at which the rupture time is minimum. A critical film thickness is identified based on the sign of the disjoining pressure gradient, below which the film is unstable in that the rupture time is very small. The calculated values of rupture time as well as the optimum wavenumber in the present analysis agree well with the results of linear stability analysis for immobile as well as completely mobile gas-liquid film interfaces. For stable films, the rupture time is found to increase dramatically with film thickness near the critical film thickness. As expected, the average rupture time was found to be higher for smaller amplitudes of imposed perturbations, larger surface potentials, larger surface tensions and smaller Hamaker constants.