Outline Imaging by THz Time Domain Spectroscopy

Outline imaging by THz time domain spectroscopy is proposed. Spectroscopic splitting at interface is reported, The principle of outline imaging is put forward. Experimental results demonstrate the feasibility of outline imaging by spectroscopic splitting, It is shown that clear out：line image of sample interface could be achieved easily by this technique. The spatial resolution is about 0.6mm. The THz-beam focus, the scanning step and the THz pulse width are the critical foctors affecting the imaging resolution. The signal-to-noise ratio of this technique could be improved greatly compared to the conventional transsion imaging.     

球栅阵列倒装焊封装中的热应变值的测试

利用高温云纹实验方法测试球栅阵列(BGA)封装焊点的热应变,采用硅橡胶试件光栅复制技术,使测试环境温度提高到200℃.通过实时热应变测量,得到各焊点的热应变关系以及封装材料、电路板各部分的热应变分布状况,为研究集成电路封装组件焊点的建模和热疲劳破坏机理提供了可靠的实验依据.     

谐振式力传感器敏感结构的研究

利用材料力学及弹性力学法，对石英晶体谐振式力传感器的悬臂梁结构进行了研究，得出了双梁单岛及三梁单岛悬臂梁结构的力转移系数，在与实验结果进行了比较后证明，支承结构的理论推导与实验结果一致。     

业务穿越ATM-PON的延时和延时变化研究

ATM-PON是光纤接入网的重要技术。文章研究了业务穿越ATM-PON接入网的延时和延时变化性能，着重分析媒体接入控制协议对业务延时和延时变化性能的影响。研究结论对ATM-PON媒体接入控制协议的合理设计有很大的帮助。     

聚二甲基二烯丙基氯化铵的合成,表征及抗菌性能

65％的二甲基二烯丙基氯化铵（DADMAC）单体水溶液通过自由基聚合得到分子量约为5000的聚二甲基二烯丙基氯化铵（PDADMAC）均聚物。用红外光谱，核磁共振，X射线衍射仪，粘度法和扫描电镜对PDADMAC进行结构分析和表征。合成聚合物的抗霉菌实验表明，PDADMAC对多种霉菌有抑制作用，具有较宽的抑菌谱；抗细菌实验表明，PDADMAC对金黄色葡萄球菌，大肠杆菌，枯草芽孢杆菌具有不同程度的抑制作用。     

Isothermal crystallization kinetics of poly(3‐hydroxybutyrate)/layered double hydroxide nanocomposites

Poly(3‐hydroxybutyrate) (PHB)/layered double hydroxides (LDHs) nanocomposites were prepared by mixing PHB and poly(ethylene glycol) phosphonates (PEOPAs)‐modified LDH (PMLDH) in chloroform solution. Both X‐ray diffraction data and TEM micrographs of PHB/PMLDH nanocomposites indicate that the PMLDHs are randomly dispersed and exfoliated into the PHB matrix. In this study, the effect of PMLDH on the isothermal crystallization behavior of PHB was investigated using a differential scanning calorimeter (DSC) and polarized optical microscopy. Isothermal crystallization results of PHB/PMLDH nanocomposites show that the addition of 2 wt % PMLDH into PHB induced more heterogeneous nucleation in the crystallization significantly increasing the crystallization rate and reducing their activation energy. By adding more PMLDH into the PHB probably causes more steric hindrance of the diffusion of PHB, reducing the transportation ability of polymer chains during crystallization, thus increasing the activation energy. The correlation among crystallization kinetics, melting behavior and crystalline structure of PHB/PMLDH nanocomposites can also be discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3337–3347, 2006     

Euler configurations and quasi-polynomial systems

Consider the problem of three point vortices (also called Helmholtz’ vortices) on a plane, with arbitrarily given vorticities. The interaction between vortices is proportional to 1/r, where r is the distance between two vortices. The problem has 2 equilateral and at most 3 collinear normalized relative equilibria. This 3 is the optimal upper bound. Our main result is that the above standard statements remain unchanged if we consider an interaction proportional to r ^b, for any b < 0. For 0 < b < 1, the optimal upper bound becomes 5. For positive vorticities and any b < 1, there are exactly 3 collinear normalized relative equilibria. The case b = −2 of this last statement is the well-known theorem due to Euler: in the Newtonian 3-body problem, for any choice of the 3 masses, there are 3 Euler configurations (also known as the 3 Euler points). These small upper bounds strengthen the belief of Kushnirenko and Khovanskii [18]: real varieties defined by simple systems should have a simple topology. We indicate some hard conjectures about the configurations of relative equilibrium and suggest they could be attacked within the quasi-polynomial framework.     

MORPHOLOGY OF BLACK CARBON AEROSOLS AND UBIQUITY OF 50-NANOMETER BLACK CARBON AEROSOLS IN THE ATMOSPHERE

Different-sized aerosols were collected by an Andersen air sampler to observe the detailed morphology of the black carbon （BC） aerosols which were separated chemically from the other accompanying aerosols, using a Scanning Electron Microscope equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDX）. The results indicate that most BC aerosols are spherical particles of about 50 nm in diameter and with a homogeneous surface. Results also show that these particles aggregate with other aerosols or with themselves to form larger agglomerates in the micrometer range. The shape of these 50-nm BC spherical particles was found to be very similar to that of BC particles released from petroleum-powered vehicular internal combustion engines. These spherical BC particles were shown to be different from the previously reported fullerenes found using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry （MALDI-TOF-MS）.