激光对抗技术发展动态

激光对抗主要包括激光侦察告警、激光无源干扰和有源干扰，以及激光防护几方面。本文概述了激光对抗技术的发展。     

HL－1装置辅助加热等对能量约束的影响

在ＨＬ－１托卡马克上进行了辅助加热、加料、电流驱动的物理实验研究。在改善等离子体约束方面，某些实验取得了较好的结果。在适当的稳定放电条件下，低杂波电流驱动和弹丸注入辅助加料，均能使等离子体能量约束得到一定程度的改善，与相同密度条件下的欧姆加热放电相比，能量约束时间提高了约３０％。在电子回旋共振加热等离子体实验中，等离子体总能量明显增加，但与相同密度条件下的欧姆加热放电相比，能量约束时间减少了约２０％。     

Studies on the chemical constituents of the South China Sea sponge Phacellia fusca

Three pyrrololactam alkaloids have been isolated from the marine sponge Phacellia fusca Schmidt collected from the South China Sea, and their structures were determined as 1–3 , on the grounds of spectral data. This is the first report of these compounds from this sponge. The structure of 1 was confirmed by X-ray analysis.     

实用型5GHz带宽InGaAs／InP PIN光电探测器

设计并研制成功了实用型５ＧＨｚ带宽ＩｎＧａＡｓ／ＩｎＰ ＰＩＮ光电探测器，介绍了限制探测器响应速度的主要因素，微波封装的理论依据，以及所研制器件频率响应的测试结果。     

基于级联自适应陷波器的正弦波频率估计

常用的传统和现代方法对于噪声环境中正弦信号的频率估计均存在一定的缺陷。本文利用二阶陷波器级联构造自适应陷波器,实现对多个信号频率的估计;采用递推误差信号和递推最小二乘法同时优化各个二阶陷波器的参数。仿真结果表明,该方法对于单频、多频和频率变化等情况均具有较好的估计结果,且对于噪声干扰具有较强的鲁棒性。     

自由电子激光光导效应数值研究

本文对喇曼型自由电子激光光导效应进行了理论研究和数值模拟。我们编写了轴对称的二维计算机程序(FELOG),用来研究无波导和有波导情况下的光导效应。对光场分布、光场半径、填充因子及等效折射率等进行了模拟。根据实验参数进行的模拟结果与实验结果进行比较,它们符合很好。并对影响光导效应的因素进行了分析。     

The variational Lyapunov function and strict stability theory for differential systems

In this paper, we investigate strict stability of differential systems by variational Lyapunov function. We obtain some sufficient conditions and comparison theorems.     

非线性时间序列数据中的关联维提取

本文将混沌方法引入具有非线性时间序列的降雨量分析。首先对有关混沌及关联维的概念作简单介绍,在确定降雨量数据具有混沌特征后,对其进行关联维提取,得到颇具意义的结果。     

Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006     

Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006