Determination of traces of heavy metals (Mn, Cu, Zn, Cd and Pb) in microsamples of teeth material by ETV-ICP-MS

Heavy metal levels in tooth compartments would appear to be a suitable indicator of long-term exposure. A method has been developed to assess the heavy metal levels (Mn, Cu, Zn, Cd and Pb) in tooth compartments like dentin and enamel. For the simultaneous determination of these elements in small dentin sample amounts (in some cases less than 1 mg) inductively coupled plasma mass spectrometry with electrothermal vaporization was the method of choice. Sample preparation, method development and first results of the application of the method for the analysis of tooth compartments have been described. Variation in the elemental concentrations depending on the kind of tooth and the sampling position have been observed. The method is useful for epidemiological studies of the heavy metal exposure of children.     

Experimental study of flame stabilization in low Reynolds and Dean number flows in curved mesoscale ducts

Flame stabilization during non-premixed combustion in curved ducts with a diameter of the order of magnitude of the premixed flame thickness of the reactants was investigated experimentally, since it has been established that this is a configuration with potential advantages in the context of “micro”-combustion. It was shown that, in such “mesoscale” tubes, a stable flame oscillation including extinction/re-ignition phenomena can be established for steady boundary conditions. These oscillations lead, under appropriate conditions, to sound emission in the 50–350 Hz range. This was a mode of stabilization in addition to the “classical” steady flamelet, stabilized through thermal losses to the duct walls at higher values of the Reynolds number. Curvature of the duct was shown to have minimal effect on reactant mixing, which was diffusion-controlled, but significantly affected flame thickness and stabilization. To probe the fuel-oxidizer mixing in the U-shaped, optically accessible tubes, laser induced fluorescence of acetone fuel dopant was used, and the flame structure was studied using OH PLIF. The various stabilization regimes are discussed in terms of the Reynolds and Dean numbers of the tube flow.     

Hydroxylamine-functionalised silica surfaces for biochip applications

The syntheses of triethoxy and trimethoxy silanes possessing an unprotected hydroxylamine group are described. The grafting of these coupling agents at the surface of oxidised silicon wafers was studied. Accessibility of the hydroxylamine group at the surface was demonstrated with chemical reagents, and the surface proved efficient for covalent immobilisation of peptides possessing the COCHO function.     

Selective and uniform laser-induced failure of antireflection-coated LiNbO3surfaces

LiNbO3surfaces with different antireflection coatings and from different vendors were damaged with 1.06 μm 9.5 ns full width at half maximum laser pulses. By probing with a laser spot smaller than the separation of isolated surface defects, it was possible to separate uniform damage, which was characteristic of the coating itself, from premature defect-driven localized failures. Uniform failure modes were identified and thresholds extracted for each by multithreshold analysis. Frequency of defect damage was determined at several fluences much lower than required for uniform failure. It is likely that defect-driven selective failures reduce the apparent damage threshold of flood-loaded samples. Tentative identification of a selective damage threshold was made and correlated with large-spot multimode test results. Incorporation of these results into a product-improvement program has resulted in LiNbO3Q-switches with increased resistance to selective damage.