MnO2-Based Electrochemical Supercapacitors on Flexible Carbon Substrates

Manganese dioxide films were grown on large area flexible carbon aerogel substrates. Characterization by x-ray diffraction confirmed α-MnO₂ growth. Three types of films were compared as a function of hexamethylenetetramine (HMTA) concentration during growth. The highest concentration of HM TA produced MnO₂ flower-like films, as observed by scanning electron microscopy, whose thickness and surface coverage lead to both a higher specific capacitance and higher series resistance. Specific capacitance was measured to be 64 F/g using a galvanostatic setup, compared to the 47 F/g-specific capacitance of the carbon aerogel substrate. Such supercapacitor devices can be fabricated on large area sheets of carbon aerogel to achieve high total capacitance.     

Reduction of 3‐Acyl Derivatives of Oxindoles,Benzo[b]furan‐2‐ones,and Benzo[b]thiophen‐2‐ones to the Corresponding Alkyl Derivatives by Sodium Borohydride–Acetic Acid

It was found that 3‐acyl derivatives of oxindoles, benzo[b]furan‐2‐ones, and benzo[b]thiophen‐2‐ones could be efficiently and conveniently reduced to the corresponding alkyl derivatives by pelletized sodium borohydride in acetic acid. A typical procedure involves heating the acylated substrates for approximately 90 min in a slurry of glacial acetic acid and sodium borohydride to provide the 3‐alkyl product in yields ranging from 62% to 96%. This synthetic methodology represents a convenient approach to the synthesis of the alkyl derivatives.     

锂参与合成MOF-5用于CO2/CH4混合气体分离

利用溶剂热法合成了不同锂含量的MOF-5(xLi-MOF-5, x=0, 1, 3, 5).在MOF-5结晶过程中,锂离子被合并入其骨架结构中.实验表明,合并入骨架的锂能够改变MOF-5的结构和表面化学性质.不同的xLi-MOF-5能够不同程度降低骨架相互穿插的程度从而导致其吸附分离能力的大幅改变.其中,3Li-MOF-5具有最高的二氧化碳捕获能力(5.47 mmol·g^-1),对40% CO₂/60% CH₄混合气体具有最优吸附选择性.     

Integration of quantitative DCE-MRI and ADC mapping to monitor treatment response in human breast cancer: initial results

PURPOSE: The objective of this study was to assess changes in the water apparent diffusion coefficient (ADC) and in pharmacokinetic parameters obtained from the fast-exchange regime (FXR) modeling of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) during neoadjuvant chemotherapy in breast cancer. MATERIALS AND METHODS: Eleven patients with locally advanced breast cancer underwent MRI examination prior to and after chemotherapy but prior to surgery. A 1.5-T scanner was used to obtain T1, ADC and DCE-MRI data. DCE-MRI data were analyzed by the FXR model returning estimates of K(trans) (volume transfer constant), v(e) (extravascular extracellular volume fraction) and tau(i) (average intracellular water lifetime). Histogram and correlation analyses assessed parameter changes post-treatment. RESULTS: Significant (P < .05) changes or trends towards significance (P < .10) were seen in all parameters except tau(i), although there was qualitative reduction in tau(i) values post-treatment. In particular, there was reduction (P < .035) in voxels with K(trans) values in the range 0.2-0.5 min(-1) and a decrease (P < .05) in voxels with ADC values in the range 0.99 x 10(-3) to 1.35 x 10(-3) mm2/s. ADC and v(e) were negatively correlated (r = -.60, P < .02). Parameters sensitive to water distribution and geometry (T(1), v(e), tau(i) and ADC) correlated with a multivariable linear regression model. CONCLUSION: The analysis presented here is sensitive to longitudinal changes in breast tumor status; K(trans) and ADC are most sensitive to these changes. Relationships between parameters provide information on water distribution and geometry in the tumor environment.     

Partial Data for the Neumann-to-Dirichlet Map

We show that measurements of a Neumann-to-Dirichlet map, with either inputs or outputs restricted to part of the boundary, can determine an electric potential on that domain. Given a convexity condition on the domain, either the set on which measurements are taken, or the set on which input functions are supported, can be made to be arbitrarily small. The result is analogous to the result by Kenig, Sjöstrand, and Uhlmann for the Dirichlet-to-Neumann map. The main new ingredient in the proof is an improved Carleman estimate for the Schrödinger operator with appropriate boundary conditions. This is proved by Fourier analysis of a conjugated operator along the boundary of the domain.     

Improved Synthesis,Structure, and Solution Characterization of the Cyclic 48-Tungsto-8-Arsenate(V), [H4As8W48O184]36−

We report on an improved synthesis and structural characterization of the cyclic 48-tungsto–8-arsenate(V) [H₄As₈W₄₈O₁₈₄]^36? (1). The mixed lithium–potassium salt of this polyanion, K_26.5Li_9.5[H₄As₈W₄₈O₁₈₄]·90H₂O (KLi-1), has been studied in the solid state by IR, single-crystal X-ray diffraction, and elemental analysis, and in solution by ¹⁸³W NMR spectroscopy.     

Mild Bioconjugation Through the Oxidative Coupling of ortho‐Aminophenols and Anilines with Ferricyanide

Using a small‐molecule‐based screen, ferricyanide was identified as a mild and efficient oxidant for the coupling of anilines and o‐aminophenols on protein substrates. This reaction is compatible with thiols and 1,2‐diols, allowing its use in the creation of complex bioconjugates for use in biotechnology and materials applications.     

Thermal processes in the systems with Li-battery cathode materials and LiPF6 -based organic solutions

Thermodynamic instability of positive electrodes (cathodes) in Li-ion batteries in humid air and battery solutions results in capacity fading and batteries degradation, especially at elevated temperatures. In this work, we studied thermal interactions between cathode materials Li₂MnO₃, xLi₂MnO₃ ^.(1???x)Li(MnNiCo)O₂,LiNi_0.33Mn_0.33Co_0.33O₂, LiNi_0.4Mn_0.4Co_0.2O₂, LiNi_0.8Co_0.15Al_0.05O₂ LiMn_1.5Ni_0.5O₄, LiMn(or Fe)PO₄, and battery solutions containing ethylene carbonate (EC) or propylene carbonate (PC), dimethyl carbonate (DMC) or ethylmethyl carbonate (EMC) and LiPF₆ salt in the temperature range of 40–400 °C. It was found that these materials are stable chemically and well performing in LiPF₆-based solutions up to 60 °C. The thermal decomposition of the electrolyte solutions starts >180 °C. The macro-structural transformations of cathode materials upon exothermic reactions were studied by transmission electron microscopy (TEM), X-ray difraction (XRD) and Raman spectroscopy. Differential scanning calorimetry (DSC) studies have shown that the exothermic reactions in the temperature range of 60–140 °C lead to partial decomposition of both the cathode material and electrolyte solution. The systems thus formed consisted of partially decomposed solutions and partially chemically delithiated cathode materials covered by reactions products. Thermal reactions terminate and this system reaches equilibrium at about 120 °C. It remains stable up to the beginning of the solution decomposition at about 180 °C. The increased content of surface Li₂CO₃ is found to significantly affect the thermal processes at high temperature range due to extensive exothermic decomposition at low temperatures.