The Chemistry of Diet: Medicine,Nutrition, and Staple Foods in Imperial Brazil

Brazilian cuisine is much admired by present-day international chefs. However, in the nineteenth century, local ingredients and recipes were looked down upon by the Portuguese colonists, as well as by visiting European naturalists. This fact, together with medical and chemical views formulated throughout the 1800s, led locally trained doctors to attribute the occurrence of countless diseases that devastated Rio de Janeiro to local staple foods, particularly corn and manioc flour. In the first part of the present article, I review the dietary habits of Brazilians through the eyes of European naturalists who travelled across the country in the early nineteenth century. In the second part, I summarise the ideas formulated by French and German chemists on the components, and consequent nutritional value, of cereals and other sources of flour, and then analyse the appropriation of such ideas—particularly those of Justus Liebig—by Brazilian doctors and their adaptation to local conditions.     

High-throughput characterization of sediment organic matter by pyrolysis–gas chromatography/mass spectrometry and multivariate curve resolution: A promising analytical tool in (paleo)limnology

Molecular-level chemical information about organic matter (OM) in sediments helps to establish the sources of OM and the prevalent degradation/diagenetic processes, both essential for understanding the cycling of carbon (C) and of the elements associated with OM (toxic trace metals and nutrients) in lake ecosystems. Ideally, analytical methods for characterizing OM should allow high sample throughput, consume small amounts of sample and yield relevant chemical information, which are essential for multidisciplinary, high-temporal resolution and/or large spatial scale investigations. We have developed a high-throughput analytical method based on pyrolysis–gas chromatography/mass spectrometry and automated data processing to characterize sedimentary OM in sediments. Our method consumes 200 μg of freeze-dried and ground sediment sample. Pyrolysis was performed at 450 °C, which was found to avoid degradation of specific biomarkers (e.g., lignin compounds, fresh carbohydrates/cellulose) compared to 650 °C, which is in the range of temperatures commonly applied for environmental samples. The optimization was conducted using the top ten sediment samples of an annually resolved sediment record (containing 16–18% and 1.3–1.9% of total carbon and nitrogen, respectively). Several hundred pyrolytic compound peaks were detected of which over 200 were identified, which represent different classes of organic compounds (i.e., n-alkanes, n-alkenes, 2-ketones, carboxylic acids, carbohydrates, proteins, other N compounds, (methoxy)phenols, (poly)aromatics, chlorophyll and steroids/hopanoids). Technical reproducibility measured as relative standard deviation of the identified peaks in triplicate analyses was 5.5 ± 4.3%, with 90% of the RSD values within 10% and 98% within 15%. Finally, a multivariate calibration model was calculated between the pyrolytic degradation compounds and the sediment depth (i.e., sediment age), which is a function of degradation processes and changes in OM source type. This allowed validation of the Py–GC/MS dataset against fundamental processes involved in OM cycling in aquatic ecosystems.     

Novel and Stereospecific Synthesis of (2S)‐3‐(2,4,5‐Trifluorophenyl)propane‐1,2‐diol from D‐Mannitol

A stereospecific synthesis of (2S)‐3‐(2,4,5‐trifluorophenyl)propane‐1,2‐diol from D ‐mannitol has been developed. The reaction of 2,3‐O‐isopropylidene‐D ‐glyceraldehyde with 2,4,5‐trifluorophenylmagnesium bromide gave [(4R)‐2,2‐dimethyl‐1,3‐dioxolan‐4‐yl](2,4,5‐trifluorophenyl)methanol in 65% yield as a mixture of diastereoisomers (1 : 1). The Ph₃P catalyzed reaction of the latter with C₂Cl₆ followed by reduction with Pd/C‐catalyzed hydrogenation gave (2S)‐3‐(2,4,5‐trifluorophenyl)propane‐1,2‐diol with >99% ee and 65% yield.     

Luminescent Di‐ and Trinuclear Boron Complexes Based on Aromatic Iminopyrrolyl Spacer Ligands: Synthesis,Characterization, and Application in OLEDs

New bis‐ and tris(iminopyrrole)‐functionalized linear (1,2‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 2 ), 1,3‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 3 ), 1,4‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 4 ), 4,4′‐(HNC₄H₃‐C(H)?N)₂‐(C₆H₄‐C₆H₄) ( 5 ), 1,5‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 6 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 7 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₄H₈ ( 8 )) and star‐shaped (1,3,5‐(HNC₄H₃‐C(H)?N‐1,4‐C₆H₄)₃‐C₆H₃ ( 9 )) π‐conjugated molecules were synthesized by the condensation reactions of 2‐formylpyrrole ( 1 ) with several aromatic di‐ and triamines. The corresponding linear diboron chelate complexes (Ph₂B[1,3‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 10 ), Ph₂B[1,4‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 11 ), Ph₂B[4,4′‐bis(iminopyrrolyl)‐biphenyl]BPh₂ ( 12 ), Ph₂B[1,5‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 13 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 14 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐anthracenyl]BPh₂ ( 15 )) and the star‐shaped triboron complex ([4′,4′′,4′′′‐tris(iminopyrrolyl)‐1,3,5‐triphenylbenzene](BPh₂)₃ ( 16 )) were obtained in moderate to good yields, by the treatment of 3 – 9 with B(C₆H₅)₃. The ligand precursors are non‐emissive, whereas most of their boron complexes are highly fluorescent; their emission color depends on the π‐conjugation length. The photophysical properties of the luminescent polyboron compounds were measured, showing good solution fluorescence quantum yields ranging from 0.15 to 0.69. DFT and time‐dependent DFT calculations confirmed that molecules 10 and 16 are blue emitters, because only one of the iminopyrrolyl groups becomes planar in the singlet excited state, whereas the second (and third) keeps the same geometry. Compound 13 , in which planarity is not achieved in any of the groups, is poorly emissive. In the other examples ( 11 , 12 , 14 , and 15 ), the LUMO is stabilized, narrowing the gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO–LUMO), and the two iminopyrrolyl groups become planar, extending the size of the π‐system, to afford green to yellow emissions. Organic light‐emitting diodes (OLEDs) were fabricated by using the new polyboron complexes and their luminance was found to be in the order of 2400 cd m^?2, for single layer devices, increasing to 4400 cd m^?2 when a hole‐transporting layer is used.     

BODIPY: A Highly Versatile Platform for the Design of Bimodal Imaging Probes

In molecular imaging, multimodal imaging agents can provide complementary information, for improving the accuracy of disease diagnosis or enhancing patient management. In particular, optical/nuclear imaging may find important preclinical and clinical applications. To simplify the preparation of dual‐labeled imaging agents, we prepared versatile monomolecular multimodal imaging probe (MOMIP) platforms containing both a fluorescent dye (BODIPY) and a metal chelator (polyazamacrocycle). One of the MOMIP was conjugated to a cyclopeptide (i.e., octreotide) and radiolabeled with ¹¹¹In. In vitro and in vivo studies of the resulting bioconjugate were conducted, highlighting the potential of these BODIPY‐based bimodal probes. This work also confirmed that the biovector and/or the bimodal probes must be chosen carefully, due to the impact of the MOMIP on the overall properties of the resulting imaging agent.     

Dioxygen Binding in the Active Site of Histone Demethylase JMJD2A and the Role of the Protein Environment

JMJD2A catalyses the demethylation of di‐ and trimethylated lysine residues in histone tails and is a target for the development of new anticancer medicines. Mechanistic details of demethylation are yet to be elucidated and are important for the understanding of epigenetic processes. We have evaluated the initial step of histone demethylation by JMJD2A and demonstrate the dramatic effect of the protein environment upon oxygen binding using quantum mechanics/molecular mechanics (QM/MM) calculations. The changes in electronic structure have been studied for possible spin states and different conformations of O₂, using a combination of quantum and classical simulations. O₂ binding to this histone demethylase is computed to occur preferentially as an end‐on superoxo radical bound to a high‐spin ferric centre, yielding an overall quintet ground state. The favourability of binding is strongly influenced by the surrounding protein: we have quantified this effect using an energy decomposition scheme into electrostatic and dispersion contributions. His182 and the methylated lysine assist while Glu184 and the oxoglutarate cofactor are deleterious for O₂ binding. Charge separation in the superoxo‐intermediate benefits from the electrostatic stabilization provided by the surrounding residues, stabilizing the binding process significantly. This work demonstrates the importance of the extended protein environment in oxygen binding, and the role of energy decomposition in understanding the physical origin of binding/recognition.     

A Mononuclear Uranium(IV) Single‐Molecule Magnet with an Azobenzene Radical Ligand

A tetravalent uranium compound with a radical azobenzene ligand, namely, [{(SiMe₂NPh)₃‐tacn}U^IV(η²‐N₂Ph₂^.)] ( 2 ), was obtained by one‐electron reduction of azobenzene by the trivalent uranium compound [U^III{(SiMe₂NPh)₃‐tacn}] ( 1 ). Compound 2 was characterized by single‐crystal X‐ray diffraction and ¹H NMR, IR, and UV/Vis/NIR spectroscopy. The magnetic properties of 2 and precursor 1 were studied by static magnetization and ac susceptibility measurements, which for the former revealed single‐molecule magnet behaviour for the first time in a mononuclear U^IV compound, whereas trivalent uranium compound 1 does not exhibit slow relaxation of the magnetization at low temperatures. A first approximation to the magnetic behaviour of these compounds was attempted by combining an effective electrostatic model with a phenomenological approach using the full single‐ion Hamiltonian.