2,6-Bis[(o-hydroxy)phenyliminomethyl]-1-hydroxybenzene as a reagent for the selective spectrofluorimetric determination of aluminium

A spectrofluorimetric method for the determination of aluminium at ng/ml level has been developed. The method is based on the formation of a fluorescent 11 complex between Al(III) and 2,6-bis[(o-hydroxy)phenyliminomethyl]-1-hydroxybenzene at an apparent pH of 5.0 in an aqueous-ethanol medium (70% v/v ethanol). The influence of reaction variables is discussed. The range of concentration of the method is 1.0–10.0 ng/ml aluminium, the relative standard deviation 1.5% and the limit of detection 0.1 ng/ml. The advantages of the proposed method include high sensitivity and selectivity. The method has been applied to the determination of aluminium in natural waters.     

IVUS flow measurements: line spread function and decorrelation pattern

A method to measure transverse blood flow, based on correlation between consecutive radio frequency (RF) signals, has been developed. Currently, we are implementing the method for an intravascular (IVUS) array catheter. In this paper, the acoustical beam (line-spread function, LSF) was experimentally measured and compared with the simulated one. Next, the experimental LSF(E) was convolved with a matrix of white noise to produce RF(E) signals. Decorrelation pattern from the RF(E) signals was compared with the correspondent autoconvolution of the LSF(E) and a good agreement was found. We conclude that the transverse decorrelation pattern of the IVUS array catheter can be assessed from the properties of the acoustical beam.     

New Approaches to the Extraction of Arsenic Species from Soils

Arsenic extraction in natural and spiked soil samples was studied using two main types of extractants. The extractants were phosphoric acid used alone and with the addition of reducing agents (ascorbic acid and hydroxylammonium hydrochloride). The stability of arsenite (As(III)), arsenate (As(V)), monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA) in the extracts over time and under different storing conditions was assessed by means of LC-HG-AFS. A protocol was devised to extract arsenic species from soils. The protocol assures the stability of the original sample species in the extract proposed by using an extraction solution of phosphoric acid with ascorbic acid and by purging the extracts after microwave extraction. The total As, Mn and Fe content in aqua regia and in phosphoric extracts was also measured by ICP-AES in order to perform the mass balance.     

Effect of NH2 and CF3 functionalization on the hydrogen sorption properties of MOFs

The hydrogen adsorption capacity and heat of adsorption at 77 K have been evaluated for several porous metal terephthalate MOFs (MIL-53(Fe), MIL-125(Ti) and UiO-66(Zr)), as well as in their -NH(2) and -(CF(3))(2) functionalized isoreticular structures. The capacity of hydrogen is basically related to the textural properties of the solids and not to their composition. The heats of adsorption at low coverage are on the whole close to those usually reported for MOFs (6-7 kJ mol(-1)), except for the UiO-66(Zr) and MIL-53(Fe)-(CF(3))(2) analogues, whereas the presence of Lewis acid sites and/or a confinement effect enhances significantly the strength of interaction with hydrogen.     

Parabens determination with a hybrid FIA/HPLC system with ultra-short monolithic column

The combination of an ultra-short C18 monolithic column (5 mm long) with a flow injection analysis (FIA) scheme results in a versatile and efficient system that has been used for the chromatographic determination of four preservatives — methylparaben (MP), ethylparaben (EP), propylparaben (PP) and butylparaben (BP). The separation is carried out by using two carriers, A and B, consisting of a mixture of ACN: water in different proportions. The described procedure is able to separate the analytes in only 150 s. The applicable concentration range, detection limit and the relative standard deviation were the following: for MP from 1.6 × 10^-5 to 1.1 × 10^-3 M; 4.8 × 10^-4 M; 0.65%; for EP between 3.7 × 10^-5 and 2.0 × 10^-3 M; 1.2 × 10^-5 M; 1.2%; for PP between 3.9 × 10^-5 and 2.0 × 10^-3 M; 1.2 × 10^-5 M; 1.2%; and for BT between 6.0 × 10^-5 and 2.0 × 10^-3 M; 1.8 × 10^-5 M; 1.8%. The method was applied and validated satisfactorily for the determination of these parabens in commercial cosmetics samples, comparing the results with those obtained by HPLC reference method.     

Comparison of single and sequential extraction procedures for the study of rare earth elements remobilisation in different types of soils

With the continual increase in the utilisation of rare earth elements (REE) for industrial and agricultural purposes, research into the environmental and biogeochemical behaviour of REE had attracted much interest in recent times. This study principally describes the distribution of REE in four different types of soils like lateritic soil (S-1), in situ natural soil (S-2), soil contaminated by mining activity (S-3) and accidentally polluted soil (S-4) utilizing the optimised BCR sequential extraction procedure and partial extractions with various types of single extractants such as unbuffered salt solutions 0.1 M NaNO₃, 0.01 M CaCl₂, 1 M NH₄NO₃; complexing agents 0.005 M DTPA and 0.05 M EDTA; acid solutions 0.43 M CH₃COOH and 1 M HCl. Comparison of the sum of the four BCR fractions, which included an aqua regia attack on the residue, with the pseudo-total aqua regia digest values to assess the accuracy of the BCR partioning approach has been undertaken. Partial extraction results with several single extractants have also been reported for all the REE elements including yttrium which have been analysed by the optimised BCR procedure. Results obtained after 24 h extraction with each of the single extractant have also been discussed. The extraction with 1 M HCl during 24 h yielded similar quantities of REE as those released under the combined steps of 1, 2 and 3 of the BCR sequential extraction for all the four different type of soil samples indicating that this reagent can be used successfully to estimate the total extractable contents of REE in various types of soil samples.     

Trilayer Bethe lattices in the form of spin-(1/2,3/2,1/2)

The critical behaviors of the trilayer Bethe lattice in the form of spin-(1/2,3/2,1/2) with the exterior two layers consisting of spin-1/2 and the interior one having only spin-3/2 Ising spins are studied in terms of the recursion relations with either ferromagnetic or antiferromagnetic bilinear exchange interactions between the nearest-neighbor spins. The ground-state phase diagrams are calculated and it is found that the model presents six different ground state phase configurations. The thermal variations of the order-parameter and free energy are investigated, therefore, topologically different phase diagrams of the model are obtained. It is found that the model exhibits second- and first-order phase transitions, tricritical and bicritical points for the values of the coordination numbers q=3, 4 and 6 and, the reentrant behavior for q=4 and 6, respectively.     

Catalytic P--H activation by Ti and Zr catalysts

Catalytic dehydrocoupling of phosphines was investigated using the anionic zirconocene trihydride salts [Cp*2Zr(mu-H)3Li]3 (1 a) or [Cp*2Zr(mu-H)3K(thf)4] (1 b), and the metallocycles [CpTi(NPtBu3)(CH2)4] (6) and [Cp*M(NPtBu3)(CH2)4] (M=Ti 20, Zr 21) as catalyst precursors. Dehydrocoupling of primary phosphines RPH2 (R=Ph, C6H2Me3, Cy, C10H7) gave both dehydrocoupled dimers RP(H)P(H)R or cyclic oligophosphines (RP)n (n=4, 5) while reaction of tBu3C6H2PH2 gave the phosphaindoline tBu2(Me2CCH2)C6H2PH 9. Stoichiometric reactions of these catalyst precursors with primary phosphines afforded [Cp*2Zr((PR)2)H][K(thf)4] (R=Ph 2, Cy 3, C6H2Me3 4), [Cp*2Zr((PPh)3)H][K(thf)4] (5), [CpTi(NPtBu3)(PPh)3] (7) and [CpTi(NPtBu3)(mu-PHPh)]2 (8), while reaction of 6 with (C6H2tBu3)PH2 in the presence of PMe3 afforded [CpTi(NPtBu3)(PMe3)(P(C6H2tBu3)] (10). The secondary phosphines Ph2PH and (PhHPCH2)2CH2 also undergo dehydrocoupling affording (Ph2P)2 and (PhPCH2)2CH2. The bisphosphines (CH2PH2)2 and C6H4(PH2)2 are dehydrocoupled to give (PCH2CH2PH)2)(12) and (C6H4P(PH))2 (13) while prolonged reaction of 13 gave (C6H4P2)(8) (14). The analogous bisphosphine Me2C6H4(PH)2 (17) was prepared and dehydrocoupling catalysis afforded (Me2C6H2P(PH))2 (18) and subsequently [(Me2C6H2P2)2(mu-Me2C6H2P2)]2 (19). Stoichiometric reactions with these bisphosphines gave [Cp*2Zr(H)(PH)2C6-H4][Li(thf)4] (22), [CpTi(NPtBu3)(PH)2C6H4]2 (23) and [Cp*Ti(NPtBu3)(PH)2C6H4] (24). Mechanistic implications are discussed.