Some characteristic behavior of mixed spin-1/2 and spin-1 Ising nano-tube

The magnetization of a cylindrical Ising nano-tube is investigated by the use of the effective field theory with correlations. The effects of the crystal field couplings at the surface shell to the order parameters, susceptibility, internal energy, specific heat and free energy are investigated. Some characteristic phenomena are examined in the thermal variations, depending on crystal field term. Moreover, tricritical and critical points are found on the (D/J,kT/J) plane, where D/J and kT/J are reduced crystal-field and temperature, respectively.     

Engineered 3D microporous gelatin scaffolds to study cell migration

Here we present a facile method to fabricate microporous hydrogel scaffolds that can be functionalized with a chemokine gradient. These scaffolds allow studying cellular responses in a 3D environment.     

Kinetic Study on the Isomerization of Perindopril by HPLC

The isomerization of perindopril has been investigated using dynamics chromatography and an unified equation introduced by Trapp that was based on stochastic and theoretical plate models to determine the energies. The isomerization rate constants and Gibbs activation energies of isomerization are directly calculated from chromatographic peak parameters, i.e., retention times of the inter-converting species, peak width at half height, and relative plateau height. From the rate constant \( k_{1}^{ue} (T) \), measured at variable temperatures, the kinetic eyring activation parameters ΔG ^#, ΔH ^# and ΔS ^# of isomerization of perindopril were obtained. By variation of the flow rate of the mobile phase, the expected independence of the isomerization barrier from the chromatographic time scale was demonstrated for the first time. The relationships between peak shape and chromatographic conditions, such as flow rate, temperature, pH, organic modifier, and β-cyclodextrin, such as an additive, were investigated. In addition, an NMR investigation on perindopril was described.

     

Dual-channel spectral subtraction algorithms based speech enhancement dedicated to a bilateral cochlear implant

In this paper, two speech enhancement algorithms (SEAs) based on spectral subtraction (SS) principle have been evaluated for bilateral cochlear implant (BCI) users. Specifically, dual-channel noise power spectral estimation algorithm using power spectral densities (PSD) and cross power spectral density (CPSD) of the observed signals was studied. The enhanced speech signals were obtained using either Dual Channel Non Linear Spectral Subtraction ‘DC-NLSS’ or Dual-Channel Multi-Band Spectral Subtraction ‘DC-MBSS’ algorithms. For performance evaluation, some objective speech assessment tests relying on Perceptual Evaluation of Speech Quality (PESQ) score and speech Itakura-Saito (IS) distortion measurement were performed to fix the optimal number of frequency band needed in DC-MBSS algorithm. In order to evaluate the speech intelligibility, subjective listening tests were assessed with 50 normal hearing listeners using a specific BCI simulator and with three deafened BCI patients. Experimental results, obtained using French Lafon database corrupted by an additive babble noise at different Signal-to-Noise Ratios (SNR), showed that DC-MBSS algorithm improves speech understanding better than DC-NLSS algorithm for single and multiple interfering noise sources.     

Evaluation of Matrix-Fracture Transfer Functions for Counter-Current Capillary Imbibition

Different functions describing matrix-fracture transfer were tested for counter-current capillary imbibition interaction. The recovery curves obtained from capillary imbibition experiments were used to fit the transfer functions. The exponential coefficients yielding the best fit to the experimental data were obtained and correlated to the effective parameters such as viscosity, IFT, matrix length and diameter, matrix permeability and porosity, and wettability using multivariable regression analysis. In order to obtain the recovery curves, experiments were conducted on Berea sandstone and Indiana limestone samples. Cylindrical samples with different shape factors were obtained by cutting the plugs 1, 2.5, and 5 cm in diameter and 2.5, 5, and 10 cm in length. All sides were coated with epoxy except one end. More than fifty static imbibition experiments were carried out on vertically and horizontally situated samples where the imbibition took place upward and lateral directions, respectively. Brine–air, brine–kerosene, brine–mineral oil, and surfactant solution–mineral oil pairs were used as fluids. For many matrix shape factors (especially longer and small diameter ones), dividing the recovery curve into three parts were needed as the early, intermediate, and late times, which are typically distinguished by the time required for the imbibition front to reach the closed boundary at the end of the core. Correlations among the exponential coefficients and rock/fluid properties were developed. It was observed that different rock/fluid properties and transfer mechanisms (capillary imbibition and gravity drainage) govern the process for each part. Hence, the analyses done in this study were useful not only for developing explicit transfer functions but also identifying the physics of the counter-current imbibition recovery.     

Synthesis and electrochemical properties of a novel calix[4]arene derivative for facilitated transfer of alkali metal ions across water/1,2-dichloroethane micro-interface

The alkali metal ion transfers facilitated by a novel calix[4]arene derivative (OPEC) across the water/1,2-dichloroethane (1,2-DCE) micro-interface supported at the tip of a micropipette were presented. The well-defined voltammetric behaviours except Cs⁺ was obtained by cyclic voltammetry and differential pulse voltammetry. The bulk concentration of metal ions was much higher than that of OPEC in the performed measurements. The diffusion coefficient of OPEC in the 1,2-DCE phase was calculated as 5.18 ± 0.70 × 10^? 6 cm² s^? 1. On the basis of the changes of the half-wave transfer potentials, the logarithms of the association constants having 1:1 ionophore–ion complex stoichiometry for Li⁺, Na⁺, K⁺ and Rb⁺ in 1,2-DCE were determined as 4.80, 4.62, 4.98 and 5.32, respectively. The facilitated ion transfers were also evaluated by the Randles equivalent circuit used for ac-impedance data analysis.     

Isolation and X-ray structure analysis of citreohybridonol from marine-derived Penicillium atrovenetum

The anti-neuroinflammatory meroterpenoid citreohybridonol was isolated for the first time from a sponge-derived fungus Penicillium atrovenetum. In this study, in addition to isolation and structure featuring, its unambiguous absolute configuration was determined exclusively by single crystal X-ray diffraction. The C-17-keto tautomer was clearly observed in X-ray analysis. The substance crystallises in the monoclinic space group P2₁ with a = 10.7496(5) Å, b = 14.3286(7) Å, c = 17.4909(8) Å, β = 103.235(2)°, V = 2622.5(2) Å³, Z = 2, D_calcd = 1.280 g/cm³. The chirality of the asymmetric carbon atoms was as follows: C3 (S), C5 (R), C6 (S), C8 (S), C9 (R), C10 (R), C13 (R), C14 (R).     

CT scan contrast enhancement using singular value decomposition and adaptive gamma correction

We propose in this paper a new enhancement algorithm dedicated to dark computed tomography (CT) scan based on discrete wavelet transform with singular value decomposition (DWT–SVD) followed by adaptive gamma correction (AGC). Discrete wavelet transform (DWT) is considered to decompose the input dark CT image in four sub-bands. Singular value decomposition (SVD) is used in order to compute the corresponding singular value matrix of low–low (LL) sub-band image. The enhanced LL sub-band is determined by scaling the singular value matrix of original LL sub-band by an adequate correction factor, followed by inverse SVD. For a further contrast improvement, the new enhanced LL sub-band image is processed using an AGC algorithm. Finally, the obtained LL sub-band image undergoes inverse DWT together with the unprocessed sub-bands to generate the final enhanced image. This proposed method has the advantage of being fully automatic and could be applied for dark input images with either low or moderate contrast. Different dark CT images are considered to compare the performance of our proposed method to three other enhancement techniques using both objective and subjective assessments. Simulation results show that our proposed algorithm consistently produces good contrast enhancement, with best brightness and edges details conservation and with minimum added distortions to the enhanced CT images.     

Determination of Cadmium,Copper, Lead,and Zinc in Pilchard Sardines from the Bay of Boumerdés by Atomic Absorption Spectrometry

Fish are an important human food with increasing consumption in recent decades. Diet is the main route of exposure to heavy metals for human health. For this reason, many studies have been performed on the pollution by heavy metals in different species of fish. Our main objective was to evaluate the pollution by trace metals (Zn, Cu, Pb, and Cd) in sardine muscles collected from the bay of Boumerdés (Algeria). Flame atomic absorption spectroscopy (AAS) was used for the quantification of Cu and Zn. The quantification of Cd and Pb was achieved by graphite furnace (GF) AAS. The analysis revealed the presence of metal trace elements in the muscles of species at concentrations below the thresholds established by national and international regulations.     

Synthesis, 13C-NMR characterization and antimicrobial properties of a novel series of 3-(N-Substituted thiocarbamoyl)hydrazino-1,2,4-triazino-[5,6-b]indole derivatives

A series of 3-(N-substituted thiocarbamoyl)hydrazino-1,2,4-triazino[5,6-b]indole derivatives 3–22 has been synthesized and evaluated for in vitro antimicrobial activity. Although some of the products displayed significant activity against Staphylococcus aureus, Escherichia coli and Candida albicans, their bactericidal and bacterostatic potencies were lower than that of penicillin G. The structure of the products was assigned upon the basis of their infrared, ¹H-nmr and ¹³C-nmr spectra.