Dichloro(2,2′‐diamino‐4,4′‐bi‐1,3‐thiazole‐N3,N3′)copper(II)

The title complex, [CuCl₂(C₆H₆N₄S₂)], has a flattened tetrahedral coordination. The Cu^II atom is located on a twofold rotation axis and is coordinated by two N atoms from a chelating 2,2′‐di­amino‐4,4′‐bi‐1,3‐thia­zole ligand and by two Cl atoms. Intramolecular hydrogen bonding exists between the amino groups of the 2,2′‐di­amino‐4,4′‐bi‐1,3‐thia­zole ligand and the Cl atoms. The intermolecular separation of 3.425 (1) Å between parallel bi­thia­zole rings suggests there is a π–π interaction between them.     

Three monoalkoxy‐substituted nido‐platinaboranes: [(PPh3)2PtB10H11‐8‐(OCH3)], [(PPh3)2PtB10H11‐8‐{OCH(CH3)2}] and [(PPh3)2PtB10H10‐9‐{OCH(CH3)2}]

Each of the title compounds, 8‐methoxy‐7,7‐bis­(tri­phenyl­phosphine‐P)‐8,9:10,11‐di‐μH‐7‐platina‐nido‐undecaborane di­chloro­methane hemisolvate, [Pt(CH₁₄B₁₀O)(C₁₈H₁₅P)₂]·0.5CH₂Cl₂, (I), 8‐isopropoxy‐7,7‐bis­(tri­phenyl­phosphine‐P)‐8,9:10,11‐di‐μH‐7‐platina‐nido‐undecaborane di­chloro­methane solvate, [Pt(C₃H₁₈B₁₀O)(C₁₈H₁₅P)₂]·CH₂Cl₂, (II), and 9‐isopropoxy‐7,7‐bis­(tri­phenyl­phosphine‐P)‐8,9:10,11‐di‐μH‐7‐platina‐nido‐undecaborane di­chloro­methane solvate, [Pt(C₃H₁₈B₁₀O)(C₁₈H₁₅P)₂]·CH₂Cl₂, (III), has an 11‐vertex nido polyhedral skeleton, with the 7‐platinum centre ligating to two exo‐polyhedral PPh₃ groups and an alkoxy‐substituted polyhedral borane ligand. Compounds (II) and (III) are isomers. The Pt—B distances are in the range 2.214 (7)–2.303 (7) Å for (I), 2.178 (16)–2.326 (16) Å for (II) and 2.205 (6)–2.327 (6) Å for (III).     

Temperature-controlled 'breathing' of carbon dioxide bubbles

We report a microfluidic (MF) approach to studies of temperature mediated carbon dioxide (CO(2)) transfer between the gas and the liquid phases. Micrometre-diameter CO(2) bubbles with a narrow size distribution were generated in an aqueous or organic liquid and subsequently were subjected to temperature changes in the downstream channel. In response to the cooling-heating-cooling cycle the bubbles underwent corresponding contraction-expansion-contraction transitions, which we term 'bubble breathing'. We examined temperature-controlled dissolution of CO(2) in four exemplary liquid systems: deionized water, a 0.7 M aqueous solution of NaCl, ocean water extracted from Bermuda coastal waters, and dimethyl ether of poly(ethylene glycol), a solvent used in industry for absorption of CO(2). The MF approach can be extended to studies of other gases with a distinct, temperature-dependent solubility in liquids.     

Highly sensitive detection of silybin based on adsorptive stripping analysis at single-sided heated screen-printed carbon electrodes modified with multi-walled carbon nanotubes with direct current heating

A new disposable multi-walled carbon nanotubes modified single-sided heated screen-printed carbon electrode (MWNT/ss-HSPCE) was fabricated. The electrochemical behavior of silybin was investigated by cyclic voltammetry and the probable electrode reaction mechanism was proposed. A simple and cheap direct current heating supplier was used to heating the electrode for adsorptive accumulation of silybin. The square wave voltammetric stripping peak current of silybin at MWNT/ss-HSPCE with an elevated electrode temperature of 50 °C only during accumulation step was dramatically improved compared with that at bare single-sided heated screen-printed carbon electrode (ss-HSPCE) without heating. This enhancement was mainly contributed to the combination of the advantages of multi-walled carbon nanotubes and electrically heated electrodes. Under optimum conditions, two detection linear ranges of silybin were from 1.0 × 10⁻⁹ to 1.0 × 10⁻⁷ M and 3.0 × 10⁻⁷ to 1.0 × 10⁻⁶ M. A detection limit of 5.0 × 10⁻¹⁰ M could be obtained (S/N = 3), which was more than two magnitudes lower than that at bare ss-HSPCE without heating. To the best of our knowledge, this was also at least two magnitudes lower than any others for electrochemical detection of silybin in the literature. Finally, the method was successfully applied to the determination of silybin in pharmaceutical tablets.     

Seasonal variations in metabolite profiling of the fruits of Ligustrum lucidum Ait

The metabolite profiling of fruits of the herb Ligustrum lucidum Ait collected during different months has been performed using ultra-performance liquid chromatography with quadrupole time-of-flight mass spectrometry (UPLC/QTOFMS) and multivariate statistical analysis techniques. The markers such as oleuropein acid, neonuezhenide, specnuezhenide, oleuropein and ligustrosidic acid accountable for such variations were identified through the loadings plot of principal component analysis (PCA), and the tentative identification of the markers is completed by comparing the mass spectra and retention times with those of reference compounds and/or tentatively assigned by matching empirical molecular formulae and MS/MS data with those of the known compounds published. Furthermore, one of the chemical markers, such as specnuezhenide, which is water-soluble, biologically active and also the predominant compound in this crude drug, was quantified by ultra-performance liquid chromatography coupled with a tunable UV detector (UPLC-TUV). The developed UPLC method provides good linearity (r(2)=0.9991), repeatability (RSD=2.96%), intra- and inter-day precisions (RSD=0.21%, 0.96%), with accuracies of 99.18-100.26% and a recovery of specnuezhenide of 97.57%. The fruits of L. lucidum Ait collected from August to December were tested. The results clearly show that the fruits of L. lucidum Ait harvested in October have the highest yields of specnuezhenide. It is also noted that the variations of content of specnuezhenide obtained by both methods have a strong correlation. This suggests that the newly proposed strategy is a reliable and simple method for the rapid discrimination of subtle variations, within the same plant species or strains, due to different seasonal collection times.     

Discrimination of Ganoderma lucidum according to geographical origin with near infrared diffuse reflectance spectroscopy and pattern recognition techniques

A rapid and nondestructive near infrared (NIR) method combined with chemometrics was used to discriminate Ganoderma lucidum according to cultivation area. Raw, first, and second derivative NIR spectra were compared to develop a robust classification rule. The chemical properties of G. lucidum samples were also investigated to find out the difference between samples from six varied origins. It could be found that the amount of polysaccharides and triterpenoid saponins in G. lucidum samples was considerably different based on cultivation area. These differences make NIR spectroscopic method viable. Principal component analysis (PCA), discriminant partial least-squares (DPLS) and discriminant analysis (DA) were applied to classify the geographical origins of those samples. The results showed that excellent classification could be obtained after optimizing spectral pre-treatment. For the discriminating of samples from three different provinces, DPLS provided 100% correct classifications. Moreover, for samples from six different locations, the correct classifications of the calibration as well as the validation data set were 96.6% using the DA method after the SNV first derivative spectral pre-treatment. Overall, NIR diffuse reflectance spectroscopy using pattern recognition was shown to have significant potential as a rapid and accurate method for the identification of herbal medicines.     

Photoinitiation mechanism of free radical photopolymerization in the presence of cyclic acetals and related compounds

The behavior of six cyclic acetals and related compounds in the photoinitiation step of a radical photopolymerization was investigated. As shown by the photopolymerization kinetic data obtained from FTIR spectroscopy, most of them are efficient coinitiators in the presence of benzophenone (BP) with efficiencies close to a reference amine coinitiator (ethyl dimethylaminobenzoate, EDB). Laser flash photolysis and ESR spin trapping technique were used to study the photochemical mechanisms of the production of initiating radicals and explain the differences in reactivity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Self-assembled nanoparticle probes for recognition and detection of biomolecules

Colloidal gold nanocrystals have been used to develop a new class of nanobiosensors that is able to recognize and detect specific DNA sequences and single-base mutations in a homogeneous format. At the core of this biosensor is a 2.5-nm gold nanoparticle that functions as both a nano-scaffold and a nano-quencher (efficient energy acceptor). Attached to this core are oligonucleotide molecules labeled with a thiol group at one end and a fluorophore at the other. This hybrid bio/inorganic construct is found to spontaneously assemble into a constrained arch-like conformation on the particle surface. Binding of target molecules results in a conformational change, which restores the fluorescence of the quenched fluorophore. Unlike conventional molecular beacons with a stem-and-loop structure, the nanoparticle probes do not require a stem, and their background fluorescence increases little with temperature. In comparison with the organic quencher Dabcyl (4,4'-dimethylaminophenyl azo benzoic acid), metal nanoparticles have unique structural and optical properties for new applications in biosensing and molecular engineering.     

Encapsulating Sulfur into Hierarchically Ordered Porous Carbon as a High‐Performance Cathode for Lithium–Sulfur Batteries

A three‐dimensional (3D) hierarchical carbon–sulfur nanocomposite that is useful as a high‐performance cathode for rechargeable lithium–sulfur batteries is reported. The 3D hierarchically ordered porous carbon (HOPC) with mesoporous walls and interconnected macropores was prepared by in situ self‐assembly of colloidal polymer and silica spheres with sucrose as the carbon source. The obtained porous carbon possesses a large specific surface area and pore volume with narrow mesopore size distribution, and acts as a host and conducting framework to contain highly dispersed elemental sulfur. Electrochemical tests reveal that the HOPC/S nanocomposite with well‐defined nanostructure delivers a high initial specific capacity up to 1193 mAh g^?1 and a stable capacity of 884 mAh g^?1 after 50 cycles at 0.1 C. In addition, the HOPC/S nanocomposite exhibits high reversible capacity at high rates. The excellent electrochemical performance is attributed exclusively to the beneficial integration of the mesopores for the electrochemical reaction and macropores for ion transport. The mesoporous walls of the HOPC act as solvent‐restricted reactors for the redox reaction of sulfur and aid in suppressing the diffusion of polysulfide species into the electrolyte. The “open” ordered interconnected macropores and windows facilitate transportation of electrolyte and solvated lithium ions during the charge/discharge process. These results show that nanostructured carbon with hierarchical pore distribution could be a promising scaffold for encapsulating sulfur to approach high specific capacity and energy density with long cycling performance.     

Enhanced orientation of PEO polymer chains induced by nanoclays in electrospun PEO/clay composite nanofibers

Polymer fibers composed of poly(ethylene oxide) (PEO) and nanoclay were fabricated by electrospinning. The morphology of the composite nanofibers was characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), which showed aligned nanoclays in the fibers. Polarized Fourier transform infrared (FT-IR) spectroscopy revealed that the PEO chains in the composite fibers exhibit a higher degree of orientation than that in PEO nanofibers containing no nanoclay. It is believed that spatial confinement is present in the electrospun nanofibers, which results in the enforcement of the mutual restriction. The anisotropic hierarchical nanostructure may have potential applications in optics, mechanical materials, and biomedical materials for cell culture.