Wrinkling and Growth Mechanism of CuO Nanowires in Thermal Oxidation of Copper Foil

We report a systematic study on wrinkling and CuO nanowires （NWs） growth in the thermal oxidation of copper foil. Copper foils with thickness of 0.5 mm were thermally oxidized in air at 500℃ for 0.5-10 h. It is found that all the samples have wrinkles and the size of the wrinkles increases with the oxidation time increasing. CuO NWs can grow on both the sidehill and hilltop of wrinkle. The CuO NWs on sidehill are longer and denser than those on hilltop. The growth direction of the CuO NWs on sidehill is not vertical to the substrate but vertical to their growth surfaces. The process of wrinkling and CuO NWs growth can be divided into three stages： undulating, voiding, and cracking. The CuO NWs on both sidehill and hilltop grow at the undulating stage. However, only the CuO NWs on sidehill grow and those on hilltop stop growing at the voiding and cracking stages because of the void in hilltop. The local electric field in a wrinkle at undulating stage was calculated, and it is found that the difference of local electric field strengths between hilltop and sidehill is small, which indicates that the predominant driving force for the diffusion of Cu ion during CuO NWs growth is internal stress.     

Synthesis and Characterization of Iron Nanowires

The iron nanowires can be fabricated via the process in which sodium borohydride reduces iron salts in external magnetic field. The iron nanowires are found to be covered by passivated layers of iron oxide which prevent the oxidation of iron nanowires. In this process, the boron will include in iron nanowires. The average length and diameter of iron nanowires is around 1.2 micrometers and 60 nanometers, respectively. According to ICP results, the contents of B and Fe are about 1.98 wt% and 87.04 wt%, respectively, in iron nanowires. A wide variety of equipment is used to investigate the morphological, microchemical, and structural characteristics of the newly synthesized iron nanowires ––– e.g., XRD, FE‐SEM, HR‐TEM, VSM and XANES. XANES analysis indicates the boron in iron nanowires exists in the form of B₂O₃. The saturation magnetization and the coercive force of iron nanowires are 157.93 emu/g and 9.74 Oe, respectively. In‐situ images of synthesized iron nanowires during reduction process in magnetic field are observed by NSRRC transmission X‐ray microscope. Thus, this study develop a novel process to produce iron nanowires with large quantitates and can control its length and diameter by various the concentration of precursors for various applications.     

A Convenient Synthesis of 3, 4′-Bipyridine

3, 4′-Bipyridine was synthesized from 6-methoxy-3, 4′-bipyridine or 6-benzyloxy-3, 4′-bipyridine via 6-chloro-3, 4′-bipyridine. The chloro derivative was catalytically dechlorinated into the corresponding 3, 4′ -bipyridine.     

Controlling the optimum surfactants concentrations for dispersing carbon nanofibers in aqueous solution

As a new nano-scale functional material, it is necessary to achieve a uniform distribution in the composites for gaining the CNFs’ excellent reinforcing effect. In this paper, CNFs were purified by the method of high temperature annealing treatment. Six surfactants, methylcellulose (MC), hydroxypropyl methylcellulose (HPMC), sodium dodecyl sulfate (SDS), dodecylamine (DDA), N, N-dimethyl formamide (DMF) and cetyltrimethyl ammonium bromide (CTAB) were used individually and combinatorially in a certain concentration to disperse the CNFs in aqueous solution. To achieve a good dispersion of the CNFs, a method utilizing ultrasonic processing was employed. The CNFs treated by the method of high temperature annealing treatment were characterized by differential thermal analysis (DTA) and thermogravimetry analysis (TGA), and the ultrasonication-driven dispersion of CNFs in aqueous solutions were monitored by UVvis spectroscopy and transmission electron microscopy (TEM). The experiments reveal that the method of high temperature annealing treatment purified the CNFs and the maximum achievable dispersion of CNFs corresponds to the maximum UV absorbance of the solution. All results show that the surfactants mixture of MC and SDS in a certain concentration of 0.4 and 2.0 g/L has the maximum dispersion effect on CNFs in aqueous solution, the optimum concentration ratio of MC, SDS, and CNFs was 2: 10: 1.     

A Convenient and Efficient Preparation of 2‐Acetyl‐4,5‐difluorothiophene

A convenient, five‐step preparation of 2‐acetyl‐4,5‐difluorothiophene from 2,3‐dibromothiophene is described.     

Reproducible method to enrich membrane proteins with high purity and high yield for an LC‐MS/MS approach in quantitative membrane proteomics

The proportionately low abundance of membrane proteins hampers their proteomic analysis, especially for a quantitative LC‐MS/MS approach. To overcome this limitation, a method was developed that consists of one cell disruption step in a hypotonic reagent using liquid nitrogen, one isolation step using a low speed centrifugation, and three wash steps using high speed centrifugation. Pellets contained plasma, nuclear, and mitochondrial membranes, including their integral, peripheral, and anchored membrane proteins. The reproducibility of this method was verified by protein assay of four separate experiments with a CV of 7.7%, and by comparative LC‐MS/MS label‐free quantification of individual proteins between two experiments with 99% of the quantified proteins having a CV ≤30%. Western blot and LC‐MS/MS results of markers for cytoplasm, nucleus, mitochondria, and their membranes indicated that the enriched membrane fraction was highly pure by the absence of, or presence of trace amounts of, nonmembrane marker proteins. The average yield of membrane proteins was 237 μg/10 million HT29‐MTX cells. LC‐MS/MS analysis of the membrane‐enriched sample resulted in the identification of 2597 protein groups. In summary, the developed method is reproducible, produces a highly pure membrane fraction, and generates a high yield of membrane proteins.     

Application of magnetic nanoparticles for the extraction of radium-226 from water samples

Bare (unmodified) and crown ether (CE)-modified Fe₃O₄ magnetic nanoparticles (MNPs) were investigated for the rapid extraction of ²²⁶Ra from water samples. It involved synthesizing the MNPs, introducing them into the sample solutions, ultrasonicating and agitating the suspension, magnetically separating the nanoparticles from solution, and measuring the ²²⁶Ra content in the supernatant. Experimental parameters such as salt choice, salt concentration and pH were optimized to achieve maximum extraction of ²²⁶Ra onto the MNPs. ²²⁶Ra content was determined using a Hidex 300SL liquid scintillation counter with α/β separation capability, or a gamma spectrometric detection system. The bare Fe₃O₄ nanoparticles showed significant pH dependence for the extraction of ²²⁶Ra from an aqueous solution over a pH range of 2–10. They gave an extraction of 95 ± 1 and 98 ± 1 % at pH 9 in 0.1 M NaCl and 0.1 M NaClO₄, respectively, whereas an extraction of 8–24 % was obtained, over the pH ranges from 2 to 5. The CE-modified MNPs yielded extraction efficiencies as high as 99 ± 1 % in the presence of 0.01 M picric acid at pH 4. This study demonstrates that the surface functionalization of Fe₃O₄ MNPs with suitable ligand modification can offer a selective mode of extraction for ²²⁶Ra in the presence of its daughter progenies.