Geometries and properties of bimetallic phosphido-bridged complex Cp(CO)2W(μ-PPh2)W(CO)5 and Cp(CO)3W(μ-PPh2)W(CO)5

Complete geometry optimizations were carried out by HF and DFT methods to study the molecular structure of binuclear transition-metal compounds (Cp(CO)₃W(μ-PPh₂)W(CO)₅) (I) and (Cp(CO)₂W(μ-PPh₂)W(CO)₅) (II). A comparison of the experimental data and calculated structural parameters demonstrates that the most accurate geometry parameters are predicted by the MPW1PW91/LANL2DZ among the three DFT methods. Topological properties of molecular charge distributions were analyzed with the theory of atoms in molecules. (3, −1) critical points, namely bond critical point, were found between the two tungsten atoms, and between W1 and C10 in complex II, which confirms the existence of the metal–metal bond and a semi-bridging CO between the two tungsten atoms. The result provided a theoretical guidance of detailed study on the binuclear phosphido-bridged complex containing transition metal–metal bond, which could be useful in the further study of the heterobimetallic phosphido-bridged complexes.     

The Chemical Constituents from the Aerial Part of Rosa laevigata

Eleven chemical constituents were isolated from the ethyl acetate soluble fraction of the aerial part of Rosa laevigata Michx. These compounds include the Henze's ketol (16), diethyl malate (17), three γ-lactones (18-20), loliolide (21), p-coumaric acid (22), 6,7-dimethoxycoumarin (23) and three flavonoids (24-26). The new compounds 19 and 20 were determined to be the cis- and trans-isomers of ethyl 2-benzyl-3-hydroxy-5-oxo-3-furancarboxylate.     

Capillary electrophoresis with amperometric detection of curcumin in Chinese herbal medicine pretreated by solid-phase extraction

In the present study, curcumin from Chinese herbal medicine turmeric was determined by capillary electrophoresis with amperometric detection (CE-AD) pretreated by a self-designed, simple, inexpensive solid-phase extraction (SPE) cartridge based on the material of tributyl phosphate resin. An average concentration factor of 9 with the recovery of > 80% was achieved when applied to the analysis of curcumin in extracts of tumeric. Under the optimized CE-AD conditions: a running buffer composed of 15 mM phosphate buffer at a pH 9.7, separation voltage at 16 kV, injection for 6 s at 9 kV and detection at 1.20 V, CE-AD with SPE exhibited low detection limit as 3 x 10(-8) mol/l (S/N = 3), high efficiency of 1.0 x 10(5) N, linear range of 7 x 10(-4) -3 x 10(-6) mol/l (r = 0.9986) for curcumin extracted from light petroleum. The method developed resulted in enhancement of the detection sensitivity and reduction of interference from sample matrix in complicated samples and exhibited the potential application for routine analysis, especially in food, because a relatively complete process of sample treatment and analysis was described.     

Analysis of flavonoids in <Emphasis Type="Italic">Ginkgo biloba</Emphasis> L. and its phytopharmaceuticals by capillary electrophoresis with electrochemical detection

A high-performance capillary electrophoretic (CE) method with electrochemical detection (ED) has been developed for determination of the pharmacologically active flavonoids in Ginkgo biloba L. and phytopharmaceuticals containing its extract. Epicatechin, catechin, rutin, apigenin, luteolin, and quercetin are important flavonoids in this plant. Operated in a wall-jet configuration, a 300 micro m diameter carbon-disk electrode was used as working electrode with good response to the six analytes at +1000 mV (relative to the SCE). Under the optimum conditions, the analytes were separated within 22 min in a borax buffer (pH 9.0). Excellent linearity was obtained over two orders of magnitude and detection limits (S/N=3) ranged from 1.4 x 10(-7) to 5.0 x 10(-7) g mL(-1) for all six analytes. The method was successfully used for assay of Ginkgo biloba L. and its phytopharmaceuticals after a relatively simple extraction procedure; the results obtained were satisfactory.     

Analysis of the linkage positions and isomers of monosaccharide units in oligosaccharides by negativ secondary ion mass spectrometry in combination with the stereoselective reaction with substituted boronic acid

The negative secondary ion mass spectrometry, in combination with the stereoselective derivatizations with substituted boronic acid RB(OH)₂, was used in the analysis of fourteen oligosaccharides. The mass spectra of the derivatives provide information on their linkage positions and isomerism of the individual monosacaccharide units. The results indicated that among the derivatives of the oligosaccharides analyzed, those with 1–4 and 1–6 linkages all presented the ion peaks at m/z 287, sometimes one more peak at m/z 449. Furthermore, a relationship was found between the linkage positions and the intensity orders of the derivative ions. Finally, the derivatives of the disaccharides with a galactose presented an intense ion peak at m/z 347, and those of oligosaccharides with 1–6 linkage to a galactose at terminal presented the ion at m/z 317. In the case of oligosaccharides with a fructose residue, characteristic ion of m/z 155 was produced. The conditions of stereoselective derivatizations and mass spectrometry were studied, in order to obtain a better reproducibility of the mass spectra.     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

Fibre optic fluorometric enzyme sensors for hydrogen peroxide and lactate,based on horseradish peroxidase and lactate oxidase

An optical biosensor for the determination of hydrogen peroxide based on immobilized horseradish peroxidase is described. The fluorescence of the dimeric product of the enzyme catalysed oxidation of homovanillic acid is utilized to determine the concentration of H₂O₂. The membrane-bound enzyme is attached to a bifurcated fibre bundle permitting excitation and detection of the fluorescence by a fluorometer. The response of the sensor is linear from 1 to 130 M hydrogen peroxide; the coefficient of variation is 3%. The sensor is stable for more than 10 weeks. The operating pH for maximal sensor response is 8.15. This allows the sensor to be used in combination with oxidase reactions producing hydrogen peroxide, as is demonstrated with a co-immobilized lactate oxidase-horseradish peroxidase optode for the determination of L-lactate. The fluorescence intensity of this sensor depends linearly on the concentration of lactate between 3 and 200 M and a throughput of 10 samples per hour is possible. The precision is in the same range as that of the monoenzyme optode. The lifetime of the bienzyme sensor for lactate is considerably shorter than that of the peroxidase sensor; it is limited by the stability of the immobilized lactate oxidase enzyme. The sensor has been applied to the determination of lactate in control serum.     

SYNERGISTIC MODIFICATION OF EPDM AND CROSSLINKING AGENT IN IMMISCIBLE BLENDS OF POLYVINYL CHLORIDE WITH LOW DENSITY POLYETHYLENE

The synergism of ethylene-propylene-diene monomer copolymer （EPDM） and dicumyl peroxide （DCP, a crosslinking agent） in low density polyethylene （LDPE）/poly（vinyl chloride） （PVC） blends was investigated. When EDPM and DCP are added to the blends simultaneously, the tensile properties could be improved significantly, especially for the blends with LDPE matrix. For example, incorporation of 10/1 （mass ratio） EPDM/DCP improves the tensile strength of the LDPE/PVC （mass ratio 80/20） blend from 7.9 MPa to 8.5 MPa and the elongation at break from 25% to 503%. Results from selective extraction, phase-contrast microscopy and thermal analysis reveal that the improvement in the tensile properties of the blends with LDPE matrix is principally due to the formation of a fine crosslinking network of the LDPE and EPDM phase. The outstanding modification effect of EPDM is explained by its dual functions： molecular entanglement with LDPE and the enhanced efficiency of DCP in the blends.