Facile preparation of hierarchically porous carbon using diatomite as both template and catalyst and methylene blue adsorption of carbon products

Hierarchically porous carbons were prepared using a facile preparation method in which diatomite was utilized as both template and catalyst. The porous structures of the carbon products and their formation mechanisms were investigated. The macroporosity and microporosity of the diatomite-templated carbons were derived from replication of diatom shell and structure-reconfiguration of the carbon film, respectively. The macroporosity of carbons was strongly dependent on the original morphology of the diatomite template. The macroporous structure composed of carbon plates connected by the pillar- and tube-like macropores resulted from the replication of the central and edge pores of the diatom shells with disk-shaped morphology, respectively. And another macroporous carbon tubes were also replicated from canoe-shaped diatom shells. The acidity of diatomite dramatically affected the porosity of the carbons, more acid sites of diatomite template resulted in higher surface area and pore volume of the carbon products. The diatomite-templated carbons exhibited higher adsorption capacity for methylene blue than the commercial activated carbon (CAC), although the specific surface area was much smaller than that of CAC, due to the hierarchical porosity of diatomite-templated carbons. And the carbons were readily reclaimed and regenerated.     

Study on the Relation between Several Metal Ions and the Growth Metabolism of a Symbiotic Fungus of Sesarma bidens

对一株双齿相手蟹肠道共生真菌Sporothrix sp.(ZJSEF -7),测定了12种金属离子对该菌生长代谢的影响.结果表明,Fe3+、K+、Mn2+、Mg2+、Ca2+和Sb3+可明显促进菌体的生长;Cu2+、Sn2+和pb2+对菌体生长没有明显的影响;Fe2+对菌体生长有强的抑制作用;Al3+和Zn2+完全抑制菌体生长.相手蟹共生菌对部分重金属显示了一定的抗性和强的化学防御功能,深入研究其作用机制,将有助于了解相手蟹共生菌的生物学本质及其生态学作用,对于保护红树林生态环境具有重要的意义.     

液相色谱-三重串联四极杆质谱测定粮油中的黄曲霉毒素

建立了超声提取-液相色谱-电喷雾三重串联四极杆质谱测定玉米、大米、大豆等粮油固体样品中黄曲霉毒素B1、B2、G1和G2(AFB1、AFB2、AFG1和AFG2)的方法。分析前对样品进行超声提取,优化得到最佳超声提取条件: 溶剂为甲醇-水(含40 g/L NaCl) (80:20, v/v)溶液、料液比为1:3(g:mL)、温度为50 ℃、时间为3 min。然后对提取的样品进行免疫亲和特异性净化。最后与液相色谱-电喷雾三重串联四极杆质谱联用,使用C18反相色谱柱,流动相为甲醇-10 mmol/L乙酸铵水溶液梯度洗脱,以黄曲霉毒素M1(AFM1)作为内标进行定量测定。结果表明,AFB1、AFB2、AFG1和AFG2的检出限分别为0.002、0.004、0.004和0.012 μg/kg。方法的加标回收率为87%～111%,日内相对标准偏差(RSD)和日间RSD分别不大于6.7%和5.6%。实验结果表明该方法可以有效地降低基质效应的影响,相比于外标法能极大地提高方法的准确度。     

Influence of the anion on the coordination mode of an unsymmetrical N-heterocyclic ligand in Cd(II) complexes: From discrete molecule to one- and two-dimensional structures

Five new 0D–2D Cd(II) complexes, [Cd₂(Hbimt)₂I₄] (1), [Cd(bimt)(Hbimt)Br]_n (2), [Cd(Hbimt)Cl₂(H₂O)]_n (3), {[Cd(Hbimt)(SO₄)(H₂O)₂]·1.5H₂O}_n (4) and [Cd(Hbimt)(SCN)₂]_n (5) (Hbimt = 2-((benzoimidazol-yl)methyl)-1H-tetrazole) have been synthesized by the reactions of Hbimt with suitable cadmium salts. Employment of different anions can influence the coordination modes of the Hbimt ligand, and accordingly result in different structures ranging from 0D to infinite 1D and 2D networks. Complex 1 displays a dimeric structure in which two Cd(II) ions are bridged through two iodine atoms. Complex 2 was caused by deprotonation of the Hbimt ligand, resulting in a 1D helical chain. While in complexes 3 and 4, Hbimt acts as a bidentate bridging ligand which joins two Cd(II) ions, leading to 1D stair-like chains. Complex 5 exhibits a 2D network structure with infinite 1D [Cd₂(SCN)₂]_n chains. The distinct structures of 1, 2, 3, 4 and 5 reveal that the anions and the versatile coordination modes of the ligand play an important role in the structures of the complexes. In addition, the luminescent properties of complexes 1–5 have been investigated in the solid state at room temperature.     

2,3-二羟甲基-2,3-二硝基-1,4-丁二醇四硝酸酯的合成、晶体结构及性能研究

以硝基甲烷为起始原料,经缩合、环化、氧化耦合、脱缩酮及硝化等5步反应合成了2,3-二羟甲基-2,3-二硝基-1,4-丁二醇四硝酸酯(BHDBT),总收率为36.1％,并采用核磁共振谱、红外光谱以及元素分析等进行了结构表征.用浓盐酸代替氯化氢气体,改进了关键中间体2,3-二羟甲基-2,3-二硝基-1,4-丁二醇(BHDB)的合成方法,并确定最佳反应条件为:刀(浓盐酸):n(BDND)=1.1∶1,反应温度55℃,时间4h,收率为94.8％.首次发现了BHDB和BHDBT的亚甲基质子具有磁不等价性,并从理论上分析其产生的原因.培养了BHDBT单晶,四元衍射晶体结构解析表明:BHDBT属于单斜晶系,空间群P2(1)/n,晶胞参数:a=0.81944(11) nm,b=2.3365(3) nm,c=0.85838(11) nm,a=90°,β=113.501(2)°,y=90°,V=1.5072(3) nm3,Z=4,Dc=1.852 g·cm-3,μ=0.189 mm-1,F(000)=856.BHDBT熔点为86.37℃,分解峰温度为185.79℃(DSC),摩擦感度为100％ (3.92 MPa,90°),特性落高H50为10.0 cm(5 kg).     

A hybrid sol–gel synthesis of mesostructured SiC with tunable porosity and its application as a support for propane oxidative dehydrogenation

Porous silicon carbide (SiC) is of great potential as catalyst support in several industrially important reactions because of its unique thermophysical characteristics. Previously porous SiC was mostly obtained by a simple sol–gel or reactive replica technique which can only produce a material with low or medium surface area (< 50 m2 g(?1)). Here we report a new hybrid sol–gel approach to synthesize mesostructured SiC with high surface area (151–345 m2 g(?1)) and tunable porosity. The synthesis route involves a facile co-condensation of TEOS and alkyloxysilane with different alkyl-chain lengths followed by carbothermal reduction of the as-prepared alkyloxysilane precursors at 1350 °C. The resulting materials were investigated by X-ray diffraction, N2 adsorption-desorption, transmission electron microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy. A mechanism for the tailored synthesis of mesostructured SiC was tentatively proposed. To demonstrate the catalytic application of these materials, vanadia were loaded on the mesostructured SiC supports, and their catalytic performance in oxidative dehydrogenation of propane was evaluated. Vanadia supported on the mesostructured silicon carbide exhibits higher selectivity to propylene than those on conventional supports such as Al2O3 and SiO2 at the same propane conversion levels, mainly owing to its outstanding thermal conductivity which makes contributions to dissipate the heat generated from reaction thus alleviating the hot spots effect and over-oxidation of propylene.     

IVSPlat 1.0: an integrated virtual screening platform with a molecular graphical interface

Background  

The virtual screening (VS) of lead compounds using molecular docking and pharmacophore detection is now an important tool in drug discovery. VS tasks typically require a combination of several software tools and a molecular graphics system. Thus, the integration of all the requisite tools in a single operating environment could reduce the complexity of running VS experiments. However, only a few freely available integrated software platforms have been developed.     

潜指纹显现方法研究进展

综合介绍了常用的几种潜指纹显现方法及原理,其中主要综述了指纹的物理化学显现法和化学显现法的进展,包括多金属沉淀法、茚三酮法和荧光材料显现法等。     

金属间化合物电催化剂Pt1Te1/XC-72的制备及其电催化氧化甲醇性能

以氯铂酸和亚碲酸钠为前驱体,采用两步法在醇水体系下得到负载型Pt1Te1金属间化合物前驱体,通过热处理得到负载型金属间化合物电催化剂Pt1Te1/XC-72.采用X射线衍射（XRD）、透射电子显微镜（TEM）、选区电子衍射（SAED）、电子能谱（EDS）和循环伏安方法（CV）对催化剂进行表征.结果表明：所得产物呈有序金属间化合物Pt1Te1结构,平均粒径4.5nm,在碳载体上具有很好的分散性;负载型金属间化合物电催化剂Pt1Te1/XC-72具有较高的电催化氧化甲醇活性,其优秀的催化氧化甲醇活性与Pt形成金属间化合物后所带来的几何及电子结构改变密切相关.