彩色PDP用玻璃基板

本文讨论了彩色ＰＤＰ现用钠钙玻璃的热稳定性，指出由于这种玻璃在热处理过程中易变形和收缩，因而不适合作大面积彩色ＰＤＰ基板材料，介绍了彩色ＰＤＰ基板玻璃的制造方法和特点。最后介绍了日本旭硝子公司和美国康宁公司各自为彩色ＰＤＰ新开发的玻璃基板材料ＰＤ２００和ＣＳ２５。     

Improving communication energy efficiency in wireless networks powered by Renewable energy sources

Energy efficiency is an important issue in wireless networks where the nodes are powered by batteries. In this work, we analyze the energy consumption in one-transmitter-multiple-receiver communication and develop scheduling schemes to improve energy efficiency at the transmitter. Our focus is on systems powered by a renewable energy source such as solar power. We consider an environment where both energy and time to access the wireless channel and transmit data are limited, and data destined for different receivers have different values and incur different energy costs. We present optimal scheduling algorithms that selectively transmit data at calculated rates so that the throughput or the total transmission value is maximized under given time limits and energy constraints.     

铁路站段用交流不间断电源供电系统

结合铁路站段的特点 ,介绍了一种交流不间断电源供电系统 ,能够很好的解决其供电问题。     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

Ψ(2S)粒子及粲夸克偶素物理实验研究——2001年度国家自然科学奖获奖项目介绍

文章介绍2001年度国家自然科学奖二等奖获奖成果，在北京正负电子对撞机上采集了Ψ（2S）粒子大数据样本，开展了粲偶素物理的广泛研究：完成了6个粲偶素涉及质量，宽度和衰变化支比等大批重要参数的首次测量或高精度测量；通过对Ψ（2S）和J／Ψ强衰变性质的比较研究，观察到一系列反常现象，挑战现有理论图像。该项研究成果对量子色动力学的检验与发展具有重要意义，为我国粲偶素物理实验研究的继续发展并保持先进水平奠定坚实基础。     

新一代智能城域光网络

本提出了一种标准化的光控制平面。阐明了开了用于光传输网的控制平面所遇到的选择与挑战。光控制平面被分解成邻居发现、服务发现、连接控制和拓扑、资源发现等几个基本的过程。不同的网络组织和分割导致了几个不同的自动配置模型：软性持久链路模型、用户接口模型和对等模型。这是构成以IP为中心的光传输网的控制和管理基础。同时也介绍了基于SDH光交换的新一代CIENA公司智能光网络，它具有大容量光交换能力和网络拓扑结构自动发现、端对端电路配置、带宽动态分配等功能及特点，将大大提高数据、电路业务的服务质量，新一代智能光网络是干线和城域网络交换传输最佳的选择。     

广义准正则格形码距离谱的计算

本文讨论了格形码距离谱的计算问题，定义了度量空间意义下的广义准正则格形码，对具有Ｉｍａｉ与Ｈｉｒａｋａｗａ［２］和Ｕｎｇｅｒｂｏｅｃｋ［３］定义的典型的时不变网格结构的广义准正则格形码，证明了其距离谱可用全零信息序列对应的码字进行计算。在理论上推广了Ｍ．Ｒｏｕａｎｃｅ与Ｄ．Ｊ．Ｃｏｓｔｅｌｏ的结果，解决了非平方欧几里德度量意义下一类ＴＣＭ信号序列的距离谱计算问题     

A new kind of compound solid-state quasi-optical power combiner

In this paper, a new kind of solid-state quasi-optical power combiner is presented. It consists of two or more singlecavity multiple-device power combiners and a Fabry-Perot cavity. The experimenal results using six Gunn diodes at X-band show that the total output power is higher than 400 mW, the total combining efficiency is as high as 83%, and the frequency stability is better than 10^?5.     

动态聚焦电子枪的模拟与实验研究

动态聚焦技术是为了满足大屏幕高分辨率彩色显像管及高分辨率彩色显示管的发展需求而产生的一项新技术。在本文中，作者首先提出了一种动态聚焦电子枪结构，进行了数值计算与分析，制作了动态聚焦电子枪并装管实验。通过对实验样管的测试与分析。证实该枪性能良好，动态聚集效果明显。     

Dynamic range of coherent analog fiber-optic links

We investigate the performance of coherent analog optical links employing amplitude modulation (AM), phase modulation (PM), and frequency modulation (FM). The performance of these coherent links is compared to that of AM direct-detection (DD) links. The signal-to-noise ratios, nonlinearities, and-spurious-free dynamic ranges (SFDR's) of the foregoing links are evaluated. We calculate the SFDR for links using DFB and Nd:YAG lasers with typical linewidths of 10 MHz and 5 kHz, respectively. The performance of PM and FM links is dominated by phase noise above a critical value of received optical power. For a linewidth of 10 MHz, and SFDR's of PM and FM links are 30 and 31 dB, respectively, for a received optical power above -27 dBm in a 1 GHz bandwidth. For a linewidth of 5 kHz, the corresponding SFDR's above a received power level of 0 dBm are 51 and 53 dB. The performance of DD and AM links is dominated by RIN above a critical value of received optical power. For a RIN level of -155 dB/Hz, the SFDR's of DD and AM links are 49 and 47 dB, respectively, for a received optical power of 10 dBm in a 1 GHz bandwidth. The SFDR's of the DD and coherent links used for transmission of subcarrier-multiplexed (SCM) signals are also derived. We evaluate target laser parameters needed by a number of different applications. For AM video and antenna remoting applications, linewidths of <1 and <3 kHz are required to use PM and FM links, respectively. For FM video, linewidths of <150 and <350 MHz are required to use PM and FM links. For SCM digital applications, linewidths of <80 and <200 MHz are required to use PM and FM links. The paper concludes with a discussion of system implementation issues, including linearization, optical frequency modulation, balanced receivers, and IF issues