Nanoparticles decorated with a Schiff's base for the microextraction of Cd,Pb, Ni,and Co in environmental samples

In this paper, we report a new liquid–liquid microextraction procedure called “nanoparticles decorated with a Schiff's base for the microextraction of Cd, Pb, Ni, and Co in environmental samples”. The developed procedure was utilized for the extraction of Cd, Pb, Ni, and Co in environmental samples. The Schiff's base was formed by reacting salicylaldehyde with 3‐aminopropyltriethoxysilane‐functionalized iron oxide nanoparticles. Analyte extraction was conducted in a capillary column system loaded with modified nanoparticles and triton X‐114 as dispersion medium. 1‐Butyl‐3‐methylimidazolium hexafluorophosphate was employed as an extraction solvent. Acidified methanol in ultrasonic bath was used as desorption solvent, and elemental determination was carried out with flame atomic absorption spectrometer. Characterization of modified nanoparticles was performed with FTIR spectroscopy and transmission electron microscopy. Solution pH, nanoparticles amount, dispersant concentration, ionic liquid, and temperature were optimized for the extraction. Detection limits obtained for Cd, Pb, Ni, and Co were 0.183, 0.201, 0.241, and 0.192 μg L^?1, respectively, and enhancement factors were 79.1, 86.4, 95.7, and 82.0, respectively. The reproducibility of the developed procedure was in the range of 3.98–5.10%. Validation was checked by applying the developed procedure on certified reference water samples. The microextraction based on nanoparticles decorated with Schiff's base was successfully applied for the extraction of Cd, Pb, Ni, and Co in real environmental water samples.     

Quinoacridine derivatives with one-dimensional aggregation-induced red emission property

A new series of acceptor-donor-acceptor (A-D-A) type quinoacridine derivatives (1-3) with aggregation-induced red emission properties were designed and synthesized. In these compounds, the electron-withdrawing 2-(3,5-bis(trifluoromethyl)phenyl)acetonitrile groups act as electron-accepting units, while the alkyl-substituted conjugated core acts as electron-donating units. The restriction of intramolecular rotation was responsible for the AIE behavior of compounds 1-3. All compounds were employed as building blocks to fabricate one-dimensional (1-D) organic luminescent nano- or microwires based on reprecipitation or slow evaporation approaches. Morphological transition from zero-dimensional (0-D) hollow nanospheres to 1-D nanotubes has been observed by recording SEM and TEM images of aggregated sates of compound 2 in THF/H(2)O mixtures at different aging time. It was demonstrated that the synthesized compounds with different lengths of alkyl chains displayed different wire formation properties. The single-crystal X-ray analysis of compound 2 provided reasonable explanation for the formation of 1-D nano- or microstructures.     

Elastic,electronic and optical properties of cotunnite TiO2 from first principles calculations

The ultrasoft pseudopotential technique is used to explore the elastic, electronic and optical properties of cotunnite TiO₂ using LDA and GGA proposed by Perdew Wang (PW91), Perdew–Burke–Ernzerhof (PBE) functional as defined by Wu and Cohen (PBEWC) and PBE functional for solids (PBESOL). The calculated elastic constants bulk modulus, shear modulus and Young’s modulus are in agreement with the previous theoretical reports. From our investigated shear anisotropy factors (A₁, A₂, and A₃), we infer that cotunnite TiO₂ is strong anisotropy in case of A₁ and A₂ and less anisotropy in case of A₃. The value of mean sound speed and Debye temperature are calculated using the obtained values of elastic moduli. The calculated structural parameters are in accord with the reported experiment and theoretical results. Our obtained values of direct bandgaps show an improvement over the other previous theoretical reports. The values of the dielectric constant (ε₁(ω)) of cotunnite TiO₂ calculated within LDA and GGA approximations are 7.655 (LDA (CA-PZ)), 7.578 (GGA (PW91)), 7.685 (GGA (WC)) and 7.655 (GGA (PBESOL)), which are slightly higher than the experimental values of rutile (6.69) and anatase (6.55) polymorphs. The obtained values of the refractive index are consistent with rutile TiO₂ and higher than anatase phase. The investigated imaginary part of dielectric constant and absorption spectrum reflect that the cotunnite TiO₂ is a weak photocatalytic material as compared to anatase and similar to rutile phases.     

Ultrasound-Assisted Dispersive Liquid-Liquid Microextraction Using Deep Eutectic Solvents (DESs) for Neutral Red Dye Spectrophotometric Determination

Deep eutectic solvents (DES), which have low toxicity and are low cost, biodegradable, and easily synthesized, were used for the extraction of neutral red (NR) dye before its spectrophotometric analysis. DES, containing choline chloride as a hydrogen bond acceptor and phenol as a hydrogen bond donor with a molar ratio of 1:2, was used for the extraction of NR dye from aqueous media. The possible interaction of different DESs with NR was studied using density functional theory (DFT) calculations. Experimentally, a UV-visible spectrophotometer was used for the quantitative analysis. The most important parameters affecting method performance, such as pH, extraction temperature, DES type, its volume, THF volume, sonication time, and centrifugation time, were optimized. The developed method provides exceptional sensitivity in terms of LOD and LOQ, which were 2.2 and 7.3 µg/L respectively. The relative standard deviation was 1.35–1.5% (n = 10), and the pre-concentration factor was 40. The method was found to be linear in the range of 2–300 µg/L (R2 = 0.9967). The method was successfully used for the determination of NR in wastewater samples. Finally, the DES-based method presents operational simplicity, high sensitivity, and rapid determination (<5 min) compared with other analytical procedures.     

Application of one-step inner-recycling counter-current chromatography for the preparative separation and purification of chemical constituents from the rhizome of Bergenia ciliate (haw.) Sternb

Bergenia ciliata (haw.) Sternb, the renowned pharmaceutical plant in Jammu and Kashmir of Pakistan, is widely applied in treating different illnesses including diabetes, diarrhea, and vomiting. This work employed an efficient one-step inner-recycling counter-current chromatography for preparative separating and purifying compounds with similar partition coefficients from the rhizome of Bergenia ciliate (haw.). Five compounds, including quercetin rhamnodiglucoside ( 1 ), quercetin-3-O-rutinoside ( 2 ), bergenine ( 3 ), kaempferol ( 4 ), and palmatic acid ( 5 ), were successfully separated using the optimized biphasic solvent system that contained ter-butylmetylether/n-butanol/acetonitrile/water (2:2:1:5, v/v) with the purities over 98%. Mass spectrometry and nuclear magnetic resonance were conducted for structural identification. As a result, our proposed strategy might be applied in separating compounds with similar partition coefficients, which was advantageous with regard to the less solvent and time consumption, and the increased number of theoretical plates.     

Unlocking the Potential of Lithium Metal Batteries With a Sulfite-Based Electrolyte

Lithium metal batteries (LMBs) have the potential to significantly increase the energy density of advanced batteries in the future. Nonetheless, the dendritic lithium structures and low Coulombic efficiency (CE) of LMBs currently impede their applied implementation. Herein, a sulfite-based electrolyte (SBE/FEC), including 1.0 m lithium bis(fluorosulfonyl)imide in a blend of ethylene sulfite and diethyl sulfite, and 5 wt% fluoroethylene carbonate is proposed. SBE/FEC is a highly efficient inhibitor against the growth of lithium dendrites through the formation of robust solid electrolyte interphase (SEI) layer. Raman spectroscopy and theoretical calculation indicate that in SBE/FEC, a significant portion of FSI⁻ exists in associated complexes, playing a vital role in the creation of LiF-rich passivation. Besides, the sulfite solvents decompose and yield polysulfide complexes in the SEI layer. A direct correlation between the proportion of cation–anion complexes and the contact angle between electrolyte and separator is elucidated through molecular dynamics simulations. The SBE/FEC system exhibits high CEs (98.3%) with Li||Cu cells, along with a steady discharge capacity of ≈137 mA h g⁻¹ in Li||LiFePO₄ cell. This study presents an effective approach for enhancing LMBs with sulfite-based electrolytes, which can lead to high-energy-density next-generation rechargeable batteries.