环路跟踪卡尔曼滤波算法的性能分析

基于卡尔曼滤波的环路跟踪算法多是通过一定仿真证明算法性能,没有系统性性能评估,难以较好指导工程应用。在原有算法基础上进行了优化,并系统性地对比分析、评估了基于卡尔曼环路滤波算法性能,以期为算法工程化提供指导。首先提出对跟踪环路反馈调整量进行预测,使之更符合系统实际,减小环路跟踪误差。而后基于卫星信号模拟器输出信号和自生产信号源,充分评估基于卡尔曼滤波环路跟踪算法的收敛时间和灵敏度。仿真结果表明,相比目前工程常用的二阶FFL辅助三阶PLL算法,基于卡尔曼滤波环路跟踪算法能够缩短环路所需稳定时间约90%,并能提升跟踪灵敏度约5 d B,有效改善弱信号场景中接收机输出信息的完好性和连续性。     

回归分析法在风机特性中的应用

为得到理想的风机特性曲线，文中结合实际，在传统方法的基础上，提出了回归分析法，并在Matlab环境中对实测数据进行建模仿真，比较回归效果，得到了较为理想的风机特性曲线，消除了在以往特性曲线中存在的拟合曲线不光滑，回归效果不佳等问题，可有效地反映出厂风机的性能。     

煤与生物质混烧灰荷电特性研究

对玉米秸分别与两种煤以不同比例混烧生成的混烧灰进行了荷电特性研究。利用法拉第杯荷电量检测系统和静电低压撞击器(ELPI)测量了混烧灰的总体荷质比及分级荷质比,并借助于成分分析及形貌分析结果讨论了其影响机理。结果表明,随着生物质掺入量在混烧燃料中的增加,混烧灰的成分组成发生变化,使得其介电常数变大,比电阻增大,表面吸附能力增强,从而使混烧灰的总体荷质比有一定的上升趋势。对混烧灰的分级荷质比测量结果表明,排除灰样粒径的影响,生物质的掺入使得混烧灰的荷电能力得以增强,但影响相对较小,颗粒粒径是影响混烧灰荷电能力的主要因素。     

Recoverable Mn~Ⅲ (salen) supported on diamine modified zirconium poly(styrene-isopropenyl phosphonate)-phosphate as an efficient catalyst for epoxidation of unfunctionalized olefins

Chiral Mn Ⅲ (salen) (Jacobsen’s catalyst) was axially immobilized onto a new type of organic polymer-inorganic hybrid materialzirconium poly(styrene-isopropenyl phosphonate)-phosphate(ZPS-IPPA) with different linkage lengths and evaluated as catalysts for the epoxidation of unfunctionalized olefins. The results demonstrated that the prepared catalysts exhibited moderate to good activity and enantioselectivity in the asymmetric epoxidation of unfunctionalized olefins. Furthermore, the immobilized catalysts were relatively stable and could be conveniently separated from the reaction system by simple precipitation in hexane. Moreover, higher enantioselectivity was obtained with catalyst 2c than that of homogeneous counterpart catalyzed even after eight times. The excellent recycling of the catalyst was attributed to its structure feature of ZPS-IPPA which is different from either pure polystyrene or pure zirconium phosphates.     

叶绿素及其Cu、Zn衍生物的伪装性能研究

研究了类叶绿素活性颜料在伪装应用中的光谱性能及光稳定性问题。从绿色植被的色素着手,分析了叶绿素的性质及影响其降解的原因,用Cu2+、Zn2+金属离子替代天然叶绿素中的Mg2+,制备了叶绿素衍生物,并通过光谱特性和光稳定性对叶绿素衍生物的特性进行了比较分析。研究结果表明,从光谱性能和稳定性两方面综合考虑,Cu叶绿素更适合作为叶绿素修饰目标来提高颜料的稳定性,从而为新型光学伪装涂料的制备提供材料基础。     

A temperature sensor based on the splicing of a core offset multi-mode fiber with two single mode fibers

In this paper, a temperature sensor based on the splicing of a core offset multi-mode fiber with two single mode fibers is proposed and demonstrated experimentally. The temperature sensing principle is analyzed and related experiment is performed. By controlling the core offset and splicing length of the specialty multi-mode fiber (SMMF), two sensors with different temperature sensing properties are obtained, and experimental results show that the temperature sensitivity can be up to 48.76 pm/°C in the range of 25—95 °C. Moreover, it has many advantages, including small size, high sensitivity, and simple structure. So it can be used in potential temperature sensing applications, such as industrial production, biomedical science, power electronics, and so on.     

Miniature Fabry-Perot interferometric sensor for temperature measurement based on photonic crystal fiber

A novel miniature Fabry-Perot interferometric (FPI) temperature sensor is proposed and demonstrated experimentally. The modal interferometer is fabricated by just splicing a section of photonic crystal fiber (PCF) with a single-mode fiber (SMF). The air holes of the PCF are fully collapsed by the discharge arc during the splicing procedure to enhance the reflection coefficient of the splicing point. The transmission spectra with different temperatures are measured, and the experimental results show that the linear response of 11.12 pm/°C in the range of 30–80 °C is obtained. This sensor has potential applications in temperature measurement field.     

电子浆料用玻璃的研究及发展趋势

随着微电子技术的快速发展,电子元器件日益向微型化、集成化以及高频化方向发展。电子浆料作为电子元器件的关键材料,发挥着越来越重要的作用。玻璃粘结剂是电子浆料的重要组成部分,在电子浆料中占据重要位置。通过介绍广泛应用于电子行业的Au、Ag、Cu、Al、Ni、Zn等电子浆料研究应用现状及其特点,总结了广泛应用于电子浆料的玻璃粘结剂的种类和特性,并重点讨论了玻璃粘结剂的性能对电子浆料研究应用的影响。最后,结合电子浆料用玻璃现状,介绍了电子浆料用玻璃的发展趋势。     

基于PBAC模型和IBE的医疗数据访问控制方案

医疗卫生领域形成的医疗大数据中包含了大量的个人隐私信息,面临着外部攻击和内部泄密的潜在安全隐患。传统的访问控制模型没有考虑用户访问目的在侧重数据隐私的访问控制中的重要作用,现有的对称、非对称加密技术又都存在密钥管理、证书管理复杂的问题。针对这些问题,提出了综合应用PBAC模型和IBE加密技术的访问控制方案,支持针对医疗数据密文的灵活访问控制。通过加入条件目的概念对PBAC模型进行扩展,实现了对目的树的全覆盖;以病患ID、条件访问位和预期目的作为IBE身份公钥进行病患数据加密,只有通过认证并且访问目的符合预期的用户才能获得相应的私钥和加密数据,从而实现对病患信息的访问。实验结果证明,该方案达到了细粒度访问控制和隐私保护的目的,并具有较好的性能。