三氟化硼引发四氢呋喃聚合的研究——以环氧氯丙烷为促进剂

<正> 四氢呋喃(THF)通过正离子开环聚合而制得的聚丁二醇(PTMG)是生产嵌段聚醚聚氨酯及嵌段聚醚聚酯弹性材料的重要原料。目前制备PTMG所采用的引发剂都是强酸型的,如高氯酸、氟磺酸或发烟硫酸等,对设备腐蚀严重。用酸性较弱的三氟化硼引发聚合在文献上也有一些研究报道,但尚难以采用,其主要困难在于实际应用的     

四氢呋喃与环氧氯丙烷共聚合的研究

<正> 晃玉等曾以BF_3-二元醇(DO)引发四氢呋喃(THF)与环氧氯丙烷(ECH)共聚合,用所得共聚醚制成嵌段聚醚聚氨酯,与用THF均聚醚或THF-环氧丙烷(PO)共聚醚为软段的聚氨酯相比,分别在低温性能及强度上有明显改进.且由于引入氯甲基侧基可作进一步接枝共聚改性。但用BF_3-DO为引发剂很难制得不含环聚体的共聚醚,     

光同时诱导水中Cr(Ⅵ)的还原与橙黄Ⅱ的氧化

光同时诱导水中Cr(Ⅵ)的还原与橙黄Ⅱ的氧化;染料;橙黄Ⅱ;Cr(Ⅵ);光还原;光降解     

Synthesis, Crystal Structure and Electrochemistry Properties of a (N,N'-Ethylene-bis(salicylaldiminato)) Nickel(Ⅱ) Complex, [Ni2(salen)2]·NCS-NH4

A new Ni(Ⅱ) complex [Ni2(salen)2]·(NCS)·NH4 (salen = N,N'-bis(salicylidenea-mino)ethanato) has been prepared and structurally characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. It crystallizes in the orthorhombic system, space group Pbca with a = 16.8725(13), b = 19.0046(15), c = 20.0583(16) (A), Z = 8, V = 6431.8(9) (A)3, C33H32N6Ni2O4S1, Mr= 726.13, Dc = 1.500 g/cm3, F(000) = 3008, μ = 1.284 mm-1, the final R = 0.0394 and wR = 0.0767 for 4449 observed reflections with Ⅰ＞2σ(Ⅰ). The complex involves a N,N'-ethylene-bis(salicylaldiminato) Schiff base, an isothiocyanato anion and an ammonium cation. The nickle(Ⅱ) ion adopts a distorted square coordination geometry with N2O2 set of Schiff base ligand. The complexes are linked into a dimmer via intermolecular hydrogen bonds and the [Ni(salen)] moieties are connected together to form a 2-D layer structure by intermolecular N-H…O hydrogen bonds and π-π stacking. Cyclic-voltammetry method was used to characterize electrochemically the complex.     

A Home-made Simple Set-up for Measurement of Electrochemical Surface Tension Spectrum on a Mercury Drop Electrode

A setup for recording surface tension curves at a mercury drop during potential scanning is designed based on photo-sensitive detection system. Surface tension spectrum at Hg drop can be recorded by voltammetric study. A Yb(III)-NO2- catalytic reduction system was used for characterization. The simple, sensitive technique can be expected to provide fresh information on molecular interactions at electrode surfaces.     

锂离子电池正极材料LiMn2O4的合成与晶体结构（英）

Spinel LiMn₂O₄ powders were prepared using two-step synthesis method consisting of solid-state reaction method and citrate modified sol-gel method. The effects of the calcination temperature and the Li/Mn ratio of raw materials were studied on the physicochemical and electrochemical properties of the spinel LiMn₂O₄ powders, such as crystallinity, lattice constant and density. The title compound was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polycrystalline LiMn₂O₄ powers calcined at 750 ℃ were found to be composed of very uniformly-sized microcrystal with an average particle size of 300 nm. The improvement in electrochemical properties was mainly attributed to the process of re-grinding by absolute alcohol.     

三氟化硼引发四氢呋喃聚合的研究——Ⅳ.1,4-丁二醇的影响

前报中已证明用三氟化硼-环氧氯丙烷(ECH)引发四氢呋喃(THF)聚合具有较高的引发效率,并对在Ac_2O、水和无水存在下的聚合反应进行了研究。本文报道1,4-丁二醇(BG)对BF_3引发THF聚合反应的影响。通常认为在BG存在下,BF_3是不能引发THF聚合的,但本工作证明BG是有效的分子量调节剂,制备分子量在     

肝素化聚甲基硅氧烷-聚氧乙烯接枝物的合成及其体外抗凝血性能评价

以二甲基硅油接枝端羟基聚氧乙烯（ＰＤＭＳ ｇ ＰＥＯ ＯＨ）为基材，用二环己基碳二亚胺（ＤＣＣＩ）作脱剂，研究了羟基（ＯＨ）与肝素上的羧基（—ＣＯＯＨ）之间的脱水缩合反应，制备出肝素化的抗血栓材料ＰＤＭＳ ｇ ＰＥＯ Ｈｅｐ，并对其涂覆表面的肝素含量和体外抗凝血性能进行了初步评价．实验结果表明，肝素接枝的共聚物具有优良的抗凝血性能和一定的应用前景．     

电感耦合等离子体原子发射光谱法测定镍基单晶高温合金中Mo、W、Ta、Re、Ru时元素之间相互干扰的消除与校正的研究

称取镍基单晶高温合金0.100 0g于聚四氟乙烯烧杯中,先令其与盐酸9mL和硝酸1mL加热反应,待反应缓慢时滴加氢氟酸2mL并继续加热使样品完全溶解。加入500g·L^-1酒石酸溶液2mL,冷却至室温,在塑料容量瓶中加水定容至100.0mL。按仪器工作条件采用电感耦合等离子体原子发射光谱法测定其中5种合金元素(Mo、W、Ta、Re、Ru)的含量,选择分析谱线依次为204.598,207.911,240.063,197.312,240.272nm。结果发现:除了Re外,其余4种元素的测定中均受共存元素的光谱干扰,严重影响了测定结果的准确性。为克服其干扰,除了采用基体匹配法消除镍的基体干扰外,试验采用混合校正系数矩阵法对测定结果进行校准。通过一系列试验计算得到混合校准系数矩阵K,并应用于模拟样品的分析。结果表明:经过矩阵K的校准,所测定的5种元素的准确度显著提高,达到了消除共存元素之间光谱干扰的目的。通过精密度试验,测得上述5种元素测定值的相对标准偏差(n=11)均在1.5%以下,并通过标准加入法进行回收试验,测得5种元素的回收率为97.0%~105%。