基于CSAR图像的目标高度提取方法

圆周合成孔径雷达（Circular Synthetic Aperture Radar,CSAR）可以对目标进行360°全方位观测,获得目标全方位散射信息。通过将CSAR成像数据划分成多个子孔径能够直接获取目标高度信息,本文在原有获取目标高度信息的方法基础上,进行了改进和创新,提出了一种新的提取目标高度信息的方法。本文通过对子孔径图像进行高度向投影,在一定程度上提高了计算精度,同时在子孔径选择时,也考虑了子孔径之间的相关性,有效地提高了算法的精确性。最后首次引入自主测量的L波段实测数据对本文所提算法进行验证,证实了该方法的有效性和准确性。     

新型尾式硫代苯并噻唑基卟啉化合物的合成与表征

通过不对称的单羟基卟啉化合物、溴代烷烃和巯基苯并噻唑合成了一系列新型硫代苯并噻唑基尾式卟啉化合物, 并采用核磁共振氢谱、碳谱、红外光谱、质谱和元素分析对卟啉化合物的结构进行了表征.     

高效液相色谱氮杂冠醚键合固定相的合成及性能研究

我们曾用γ－氯丙基键合硅胶（ＣＰＳ），在氢化钠（ＮａＨ）作用下合成了３－（氮杂－１８－冠－６）丙基键合固定相（ＢＣＰ）［１］．该固定相对碱基、核苷酸、硝基苯酚等有较好的分离选择性，但由于ＮａＨ对硅胶基质腐蚀作用较大，导致ＢＣＰ柱效及渗透性较低．本文采...     

CHARACTERIZATION OF AMPHIPHILIC AND MICROPHASE SEPARATED GRAFT COPOLYMERS Ⅱ SURFACE CHARACTERIZATION AND IN VITRO BLOOD-COMPATIBILITY ASSESSMENT OF POLYSTYRENE-GRAFT-ω-STEARYLPOLY (ETHYLENE OXIDE)*

This paper reported the research results concerning the surface characterization ofpolystyrene-graft-w-stearyl poly(ethylene oxide) (PS-g-SPEO) by means of XPS,contactangle measurement and TEM, and its in vitro blood compatibility assessment by measuringthe plasma recalcification time (RT) and partial thromboplastin time (PTT). The XPSresults demonstrated that the surface and bulk composition of the PS-g-SPEO graftcopolymers differ remarkably from each other,and that SPEO component was constantlyenriched at the copolymer/air interface. Contact angle studies indicated that the surfacewater wettability can be adjusted effectively by changing the composition of the copolymer.PS-g-SPEO graft copolymers can undergo microphase separation as clearly illustrated byTEM photographs. The relationship between the surface properties of PS-g-SPEO graftcopolymer and its blood compatibility was also discussed.     

K＋I~2→K^+＋I~2^-离子对生成反应态－态几率与 选态截面的量子散射理论研 究

本文用Miller的-矩阵变分法在Aten-Lanting-Los两态势能面上计算了K＋I~2→K^+＋I~2^-电离反应的态－态几率和选态反应截面,结果表明了低电离阈能、几率的振荡行为及振动增强效应;电离截面随碰撞能及I~2振动量子数的变化规律与实验预测相吻合;讨论了反应机理。     

SYNTHESIS OF POLY ( ETHER-URETHANE) CONTAINING PENDANT AMINO GROUP

This paper is concerned with the synthesis of poly (ether-urethane) with pendant amino groups. The copolyether produced by ring opening copolymerization of tetrahydrofuran and epibromohydrin was treated with sodium azide in dimethylformamide to form azido substituted copolyether. The poly (ether-urethane) made from it was subjected to reduction reaction to convert azido group to amino group. The stress-strain behavior and dynamic-mechanical properties of poly (ether-urethane) containing pendant amino groups were studied.     

Octa-membered Water Ring Chain Based on Sulfonic Group in Ni（Ⅱ） Complex with 2-[（E）-（2-Oxidophenyl）methyleneamino] Ethanesulfonato and 2,2＇-Bipyridinyl

The title compound, [Ni（tssb）（2,2-bipy）2].5（H2O） 1 （tssbH2 =2-[（E）-（2-oxido- phenyl）methyleneamino]ethanesulfonato, 2,2-bipy = 2,2＇-bipyridinyl）, belongs to orthorhombic, space group Pbcn with a = 20.3983（18）, b = 17.6929（15）, c = 17.0897（15） nm, V= 6167.8（9） nm^3, Mr= 688.38, Z = 8, De = 1.481 g.cm^-3, F（000） = 2880,μ = 0.758 mm-1 and S =1.099. Each NiIr atom is six-coordinated by one N and one O atoms from one tssb^2- anion and four N atoms from two 2,2-bipy ligands to give a distorted octahedral geometry. Noticeably, there exists a rare octa-mem- bered water ring which presents a 1D chain by sulfonic group.     

PHOTOSENSITIVITY OF Ce (Ⅳ) INITIATED METHYL ACRYLATE POLYMERIZATION

The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.     

STUDIES ON CHARGE TRANSFER POLYMERIZATION——POLYMERIZATION OF ACRYLONITRILE INITIATED WITH PHENYL HYDRAZINE AND ITS DERIVATIVES

The photopolymerization of acrylonitrile (AN) initiated with phenyl hydrazine (PHZ) and its derivatives has been studied. The initiator exponent and monomer exponent were determined from the kinetic investigation to be 0.66th and 2.1th respectively and the overall activation energy was 33.4KJ/mol for the PHZ-AN system. Spectral analysis and other data indicate that a charge transfer complex between PHZ as a donor and AN as an aceeptor is formed. The initiation mechanism was proposed.     

富锌排铅咀嚼片安全性毒理学评价

对富锌排铅咀嚼片(RZLR)进行了急性毒性试验、Ames试验、骨髓微核试验、精子畸形试验和30 d喂养试验。结果表明,小鼠急性毒性LD50(BW)>21 500 mg/kg,属无毒级;Ames试验、小鼠骨髓微核试验、精子畸形试验和30 d喂养试验结果均为阴性;30 d喂养试验也未显示明显毒性。本研究证实RZLR是一种安全、无毒副作用的保健食品。