Dynamic switching characteristic dependence on sidewall angle for phase change memory

In this paper, the volume-minimized model of phase change memory (PCM) cell with Ge₂Sb₂Te₅ (GST) material has been established to study the dynamic switching (set-to-reset) characteristic dependence on the sidewall angle. Joule heating volume, threshold current, dynamic resistance and phase transition rate of PCM cells by current pulse are all calculated. The results show that the threshold current increases with decreasing the sidewall angle and is significantly impacted by the feature size and aspect ratio. The PCM cell of 90° sidewall angle exhibits the smallest Joule heating volume, the highest RESET resistance and the fastest phase transition property.     

Eigenspace-based minimum variance beamformer combined with Wiener postfilter for medical ultrasound imaging

In this paper, a new beamformer which combines the eigenspace-based minimum variance (ESBMV) beamformer with the Wiener postfilter is proposed for medical ultrasound imaging. The primary goal of this work is to further improve the medical ultrasound imaging quality on the basis of the ESBMV beamformer. In this method, we optimize the ESBMV weights with a Wiener postfilter. With the optimization of the Wiener postfilter, the output power of the new beamformer becomes closer to the actual signal power at the imaging point than the ESBMV beamformer. Different from the ordinary Wiener postfilter, the output signal and noise power needed in calculating the Wiener postfilter are estimated respectively by the orthogonal signal subspace and noise subspace constructed from the eigenstructure of the sample covariance matrix.We demonstrate the performance of the new beamformer when resolving point scatterers and cyst phantom using both simulated data and experimental data and compare it with the delay-and-sum (DAS), the minimum variance (MV) and the ESBMV beamformer. We use the full width at half maximum (FWHM) and the peak-side-lobe level (PSL) to quantify the performance of imaging resolution and the contrast ratio (CR) to quantify the performance of imaging contrast. The FWHM of the new beamformer is only 15%, 50% and 50% of those of the DAS, MV and ESBMV beamformer, while the PSL is 127.2 dB, 115 dB and 60 dB lower. What is more, an improvement of 239.8%, 232.5% and 32.9% in CR using simulated data and an improvement of 814%, 1410.7% and 86.7% in CR using experimental data are achieved compared to the DAS, MV and ESBMV beamformer respectively. In addition, the effect of the sound speed error is investigated by artificially overestimating the speed used in calculating the propagation delay and the results show that the new beamformer provides better robustness against the sound speed errors. Therefore, the proposed beamformer offers a better performance than the DAS, MV and ESBMV beamformer, showing its potential in medical ultrasound imaging.     

Inhibiting effect of carbonate on the photoinduced flatband potential shifts during water photooxidation at TiO2/solution interface

Journal of Solid State Electrochemistry - The TiO2/solution interfacial junction is of scientific and practical importance in the field of photoelectrochemical water splitting. Illumination of this...     

Rhodium-Catalyzed Enantioselective Radical Addition of CX4 Reagents to Olefins

We describe the synthetically useful enantioselective addition of Br−CX₃ (X=Cl or Br) to terminal olefins to introduce a trihalomethyl group and generate optically active secondary bromides. Computational and experimental evidence supports an asymmetric atom-transfer radical addition (ATRA) mechanism in which the stereodetermining step involves outer-sphere bromine abstraction from a [(bisphosphine)Rh^IIBrCl] complex by a benzylic radical intermediate. This mechanism appears unprecedented in asymmetric catalysis.     

Micro-/Mesoporous conjugated polymer based on star-shaped triazine-functional triphenylamine framework as the performance-improved cathode of Li-organic battery

A novel organic conjugated polymer based on star-shaped triazine-functional triphenylamine framework poly[1,3,5-tris(4-diphenylamino-phenyl)triazine] (PTDAPTz) is designed and synthesized successfully by FeCl₃-catalysted chemical oxidative polymerization. The polymer PTDAPTz powder exhibits a compactly packed pleated skirt shape-like morphology with a high surface area (~930 m² g⁻¹) and a bimodal pore size distribution ranging from micropores (~0.55 nm) to small diameter mesopores (~2–6 nm). As explored as the cathode material, the obtained PTDAPTz presents the double charge–discharge process characteristics of both the free radical redox of triphenylamine unit and the bipolar redox of triazine unit in the polymer and a well-defined multistage charge/discharge voltage plateau (~3.8 V for p-doped and ~2.0 V for n-doped) during the charge–discharge process. Also, the PTDAPTz demonstrates an improved capacity (stabilized at 123 mA h g⁻¹ until 50th cycle) and the enhanced rate performance compared to polytriphenylamine (PTPAn). Specially, the discharge curve for the part of triphenylamine unit presents an obviously improved discharge plateau (~3.8 V for PTDAPTz compared to ~3.6 V for PTPAn) due to the electron-withdrawing effect of the triazine unit to triphenylamine. The elaborate structural design and created micro-/mesoporous morphology with the double charge–discharge process make PTDAPTz a potential candidate as the performance-improved cathode of Li-organic battery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2574–2583     

Optimizing Optoelectronic Properties of Pyrimidine‐Based TADF Emitters by Changing the Substituent for Organic Light‐Emitting Diodes with External Quantum Efficiency Close to 25 % and Slow Efficiency Roll‐Off

A series of green butterfly‐shaped thermally activated delayed fluorescence (TADF) emitters, namely PXZPM , PXZMePM , and PXZPhPM , are developed by integrating an electron‐donor (D) phenoxazine unit and electron‐acceptor (A) 2‐substituted pyrimidine moiety into one molecule via a phenyl‐bridge π linkage to form a D –π–A–π–D configuration. Changing the substituent at pyrimidine unit in these emitters can finely tune their emissive characteristics, thermal properties, and energy gaps between the singlet and triplet states while maintaining frontier molecular orbital levels, and thereby optimizing their optoelectronic properties. Employing these TADF emitters results in a green fluorescent organic light‐emitting diode (OLED) that exhibits a peak forward‐viewing external quantum efficiency (EQE) close to 25 % and a slow efficiency roll‐off characteristic at high luminance.     

Polystyrene-bound diethanolamine based ionic liquids for chemical fixation of CO2

Polystyrene-bound diethanolamine based ionic liquids (PS-DHEEAB and PS-THEAB) were synthesized and applied for the chemical fixation of CO₂ into cyclic carbonates without any additional co-catalyst and solvent. The effect of the catalysts with different number of hydroxyl group in the cation of the IL on the reaction was systematically investigated. Highest activity and selectivity were achieved in the presence of polystyrene supported diethanolamine ethyl bromide (PS-DHEEAB) in comparison with other catalysts employed. The catalyst was tough in stability and also found to be extended to a variety of terminal epoxides and aziridines. The relationship between high catalytic reactivity and the –OH functional groups was proposed.