CrOx/ SBA-15介孔催化剂上丙烷在二氧化碳气氛中脱氢反应的研究

The structure and catalytic properties based on Chromium Oxide supported on mesoporous SBA-15 for oxidative dehydrogenation of propane by CO₂ have been studied by using X-ray diffraction (XRD), ultraviolet-visible diffuse reflectance spectra (UV-Vis DRS), electron spin resonance (ESR), X-ray photoelectron spectroscopy (XPS) and propane pulsing experiments in the absence of gas-phase O₂. It has been shown that propane conversion and propene yield increase with Cr loadings. The propane conversion and propene yield on CrO_x(Cr: 10wt%)/SBA-15 catalyst for oxidative dehydrogenation of propane by CO₂ at 550 ℃ reach 24.8% and 21.8%, respectively .The results of ESR, UV-Vis DRS and propane pulsing experiments indicate that Cr^Ⅲ in the CrO_x/ SBA-15 catalyst is the main active species in oxidative dehydrogenation of propane by CO₂ and Cr^Ⅵ, Cr^Ⅴ is inactive in dehydrogenation.     

MCM-41介孔分子筛共价键联钴酞菁的制备，表征及性质

采用两种方法将钴酞菁配合物共价联接到介孔分子筛MCM-41的表面：(1) 在MCM-41表面联接含伯胺的有机侧链；(2) 是在MCM-41表面联接含仲胺的有机侧链。含氯磺酸基的钴酞菁与胺反应形成磺酰胺。对得到的主客体化合物用多种物化手段和催化反应进行了表征。结果表明，钴酞菁以单体形式固定在介孔分子筛MCM-41的孔道壁上，在反应条件下固载后的钴酞菁具有高催化活性，同时表现出良好的稳定性，多次重复使用活性没有明显的改变。     

AIBN/SmCl3/乳酸体系催化甲基丙烯酸甲酯的反向原子转移自由基聚合

利用稀土金属化合物三氯化钐(SmCl3)和二氯化钐(SmCl2)之间的单电子转移反应,以AIBN/SmCl3/乳酸作为反向原子转移自由基聚合(ReverseATRP)的催化体系,成功地实现了甲基丙烯酸甲酯(MMA)的反向ATRP,并考察了温度、溶剂和组分比对聚合反应的影响.MMA在该体系中的聚合反应是一级反应,所得PMMA的分子量与单体转化率成正比,聚合物的分子量分布较窄(Mw/Mn<1.5),具有活性聚合的特征.     

二芳杂环基乙烯的合成及其光致变色反应研究

本文报道了2,3-双 (1,2-二甲基-3-吲哚基)-2-丁烯 (DF1),2,3-双 (1,4-二苯基-2-甲基-3-吡咯基)-2-丁烯 (DF2), 2,3-双(1-对甲苯基-4-苯基-2-甲基-3-吡咯基)-2-丁烯 (DF3), 2,3-双(1-对溴苯基-4-苯基-2-甲基-3-吡咯基)-2-丁烯 (DF4) 和2,3-双 (1-对甲氧苯基-5-苯基-2-甲基-3-吡咯基)-2-丁烯 (DF5) 的合成,以及它们的光致变色行为的研究。特别是DF1和DF5的光呈色和光消色过程进行了较为细致的研究。     

α, α'-二胺基二苄基硒醚的合成

本文以苯骈三氮唑、胺和苯甲基醛为原料,发现Mannich反应,生成胺烷基化的苯骈三氮唑衍生物。在此衍生物中,苯骈三氮唑基是亲核取代反应的良好离去基团,易被强亲核试剂的硒负离子取代,生成对称α,α'-二胺基二苄基硒醚。反应易进行,产率较高,产物均为固体,易提纯。这是合成含氮原子的对称硒醚的较好方法。     

微波辅助RGD环肽的固相合成

以2-氯代三苯甲基氯树脂为载体，采用Fmoc/t-Bu/Dmab正交保护策略，在微波辅助下合成了环肽c(fKRGD)，收率22.5%，纯度94.5%，其结构经MS(ESI), MS(MALDI-TOF)和HPLC确证。     

类球形正交LiMnO2的制备、微结构和电化学性能

以共沉淀法得到的类球形MnCO₃为前驱物，制备了类球形正交LiMnO₂(So-LiMnO₂)，采用XRD、SEM和N₂吸附技术对样品进行表征；与非球形正交LiMnO₂(No-LiMnO₂)进行了对比研究。结果表明：o-LiMnO₂的堆垛层错度、结晶状况、颗粒形貌和大小与前驱物的微结构密切相关；在80次电化学循环测试过程中，So-LiMnO₂经15次循环可达最大的放电容量152 mAh·g^-1，其容量衰减平均每次循环0.58 mAh·g^-1；而No-LiMnO₂要经过38次循环才能达到最大放电容量128 mAh·g^-1，容量衰减平均每次循环高达1.24 mAh·g^-1。TEM和EDS分析证明：由一次粒子团聚的类球形So-LiMnO₂能有效地抑制电解液对材料的腐蚀、减少Mn的溶解，从而提高了电化学循环能力。     

SrTi0.9M0.1O3-δ钙钛矿型氧化物催化剂甲烷氧化偶联反应性能的研究

The structure and catalytic properties of SrTi_0.9M_0.1O_3-δ (M=Mg，Al， Zr) perovskite-type catalysts for ox-idative coupling of methane (OCM) have been studied by using X-ray diffraction (XRD)，X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption of oxygen(O₂-TPD) methods. It has been shown that doping the cations of lower valence (e.g. Mg²⁺， Al³⁺) to the B site of SrTi_0.9M_0.1O_3-δ perovskite-type catalysts results in the higher content of adsorbed oxygen species on the surface of catalysts and thus higher C₂-selectivity for OCM reaction. It is suggested that the oxygen vacancies of SrTi_0.9M_0.1O_3-δ (M=Mg， Al， Zr) perovskite-type catalysts are the sites responsible for oxygen activation， and the adsorbed oxygen species on the surface of SrTi_0.9M_0.1O_3-δ catalysts are the main active species for OCM reaction.     

磺酰胺类常咯啉的分子力学参数的确定

应用量子化学ＭＮＤＯ程序及分子力学ＭＭＰ２程序，确定了一些未知磺酰胺类常咯啉的分子力学参数。应用这些参数计算了几个晶体结构已知的磺酰胺类化合物，与真实结构比较，计算结果令人满意。由此说明确定的分子力学参数用于计算磺酰胺类化合物时的正确性和可行性。     

Electrochemical Impedance Analysis of Thermogalvanic Cells

Thermogalvanic cells(also known as thermo-electrochemical cells) that convert waste heat energy to electricity are a new type of energy conversion device. However, the electron transfer kinetics and mass transfer of redox couples have not been thoroughly studied. Here, the ion reaction and charge transport in thermogalvanic cells are investigated by electrochemical impedance analysis. We first propose the detailed impedance model followed experimental verification on three types of electrode materials. Parameters including kinetic rate constants and ion diffusion coefficients for the electrodes are obtained by fitting the impedance data. Our study shows explicitly that impedance analysis can provide useful information on selecting suitable electrode materials for thermogalvanic cells.