线性调频信号检测方法的研究

在线性调频信号体制雷达的数字脉冲压缩系统中对数字脉压后的脉冲串进行DFT相参处理时，若采样时刻偏离脉压回波的峰值时刻，不同的采样频率使得DFT相参积累后的信噪比会有不同程度的损失。本文详细分析了采样频率分别为20MHz和10MHz时对信号相参积累的影响，并对幅值检测和M／N检测两种检测方法的检测性能进行了比较，仿真结果表明，M／N检测优于幅值检测。     

宽工作电压范围单电源CMOS误差放大器

采用0.8μm标准数字CMOS工艺(VTN0=0.836V,VTP0=0.930V),设计并流片验证了具有宽工作电压范围(3～6V),可作SOC系统动态电源管理芯片内部误差放大器应用的单电源CMOS运算放大器。该误差放大器芯核同时具有适合低电压工作,并对工艺参数变化不敏感的优点。对于相同的负载情况,在3V的工作电压下,开环电压增益AD=83.1dB,单位增益带宽GB=2.4MHz,相位裕量Φ=85.2°,电源抑制比PSRR=154.0dB,转换速率Sr=2.2V/μs;在6V工作电压下,AD=85.1dB,GB=2.4MHz,Φ=85.4°,PSRR=145.3dB,Sr=3.4V/μs。     

超宽带极窄脉冲设计与产生

超宽带(UWB)技术是以持续时间极短的脉冲作为传输载体进行数据通信的无线新技术。基于BJT雪崩特性,本文采用并行同时触发的工作方式,设计并产生了高重复速率的UWB脉冲电路发生器,极大地减少了时延,缩短了上升时间,提高了脉冲的幅度,并从等效电路法的观点分析计算了脉冲的特性参数,理论结果与实测结果具有较好的一致性。     

高速贴片机优化软件的设计与开发

SMT生产线要达到最大的产量,必须要考虑生产线的效率。贴片机是SMT生产线中的关键设备,因此提高贴片机的生产效率具有十分重要的意义。本文以松下贴片机为例,介绍了贴片机程序优化软件的设计与开发中的思想、方法和经验,希望对从事CAM软件研究的工程人员有一定帮助。     

CPU芯片封装技术的发展演变

本文主要介绍了CPU芯片封装技术的发展演变,以及未来的芯片封装技术。同时,从中可以看出芯片技术与封装技术相互促进,协调发展密不可分的关系。     

Measurement Method of the Thickness Uniformity for Polymer Films

Several methods for investigating the thickness uniformity of polymer thin films are presented as well their measurement principles.A comparison of these experimental methods is given.The cylindrical lightwave feflection method is found to can obtain the thickness distribution along a certain direction.It is simple and suitable method to evaluate the film thickness uniformity.     

低重分配概率的OVSF码重分配算法

在采用正交可变长扩频因子(OVSF)码作为信道化码的直接序列扩频码分多址系统中,提出用重分配概率作为重分配算法的一个新的评价指标,重分配概率越小,系统的计算复杂度越低。进而提出一种低重分配概率的、基于空码容量的重分配算法,在解决本次码阻塞的同时,兼顾对未来高数据速率的呼叫的支持能力,减少未来码阻塞发生。仿真证实,重分配概率比已有2种重分配算法都小。     

非线性干涉滤光片开关特性及逻辑功能

应用干涉滤光片作为一种光学双稳器件,演示了光学逻辑开关功能。     

乘累加运算器的高性能解决方案

在设计数字信号处理器时我们经常要设计高性能的乘累加运算器，文章详细分析了乘累加运算器的结构，提出了其高性能设计方案并采用标准单元进行了实现，同时提出了DCT运算单元的高性能解决方案。     

Nanostructured thermoset epoxy resin templated by an amphiphilic poly(ethylene oxide)‐block‐poly(dimethylsiloxane) diblock copolymer

An amphiphilic poly(ethylene oxide)‐block‐poly(dimethylsiloxane) (PEO–PDMS) diblock copolymer was used to template a bisphenol A type epoxy resin (ER); nanostructured thermoset blends of ER and PEO–PDMS were prepared with 4,4′‐methylenedianiline (MDA) as the curing agent. The phase behavior, crystallization, hydrogen‐bonding interactions, and nanoscale structures were investigated with differential scanning calorimetry, Fourier transform infrared spectroscopy, transmission electron microscopy, and small‐angle X‐ray scattering. The uncured ER was miscible with the poly(ethylene oxide) block of PEO–PDMS, and the uncured blends were not macroscopically phase‐separated. Macroscopic phase separation took place in the MDA‐cured ER/PEO–PDMS blends containing 60–80 wt % PEO–PDMS diblock copolymer. However, the composition‐dependent nanostructures were formed in the cured blends with 10–50 wt % PEO–PDMS, which did not show macroscopic phase separation. The poly(dimethylsiloxane) microdomains with sizes of 10–20 nm were dispersed in a continuous ER‐rich phase; the average distance between the neighboring microdomains was in the range of 20–50 nm. The miscibility between the cured ER and the poly(ethylene oxide) block of PEO–PDMS was ascribed to the favorable hydrogen‐bonding interaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3042–3052, 2006