Nonlinear optical properties of regioregular main‐chain polyesters

We have prepared new polyesters containing quadratic, nonlinear optical (NLO) active chromophores covalently incorporated into the main chain. In these polymers, the sequence of the chromophore units along the main chain is rigorously head to tail. All the polyesters are processable, both in the melt and in solution. For one polyester, a full second‐order NLO characterization has been performed. An out‐of‐resonance d₃₃ coefficient of 21 pm/V at 1368 nm has been measured. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2719–2725, 2007     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

The Ultrawideband Leaky Lens Antenna

A novel directive and nondispersive antenna is presented: the ultrawideband (UWB) leaky lens. It is based on the broad band Cherenkov radiation occurring at a slot printed between different infinite homogeneous dielectrics. The first part of the paper presents the antenna concept and the UWB design. The issues that are specifically addressed include the impedance matching, the radiation pattern and the phase purity. Subsequently the hardware demonstrator and the results of the measurement campaign are shown. The results fully validate the antenna concept. The antenna presents decade bandwidth impedance matching, directive and frequency independent patterns in the H-plane over two octaves, negligible cross-polarization levels, weak amplitude dispersivity and, according to the authors, the most stable phase center for a directive antenna over an ultra wide frequency range.     

Rain Scatter Interference in mm-Wave Broadband Fixed Wireless Access Networks Caused by a 2-D Dynamic Rain Environment

The classical Mie scattering theory together with the bistatic radar equation has been applied in this paper to quantify interference levels in broadband fixed wireless access (BFWA) for two different network topologies: mesh and cellular. The complete scattering analysis takes into account the realistic variations of rainfall along the propagation paths and inside the common volume. The interfering element is a rain cell model that follows closely the experimental characteristic dimension, decay and movement obtained in recent research by the authors. The signal-to-interference power ratios (S/I) for two different frequencies, 28 and 42 GHz, and several scattering angles have been calculated. They show that, when two beams cross each other, rain-induced interference must be taken into account for an efficient planning of radio communication systems operating at these millimeter-wave frequencies as well as for an adequate design and implementation of fade mitigation techniques.     

Providing application-level QoS in 3G/4G wireless systems: a comprehensive framework based on multirate CDMA

The emerging applications for 3G and 4G wireless systems typically require highly heterogeneous and time-varying quality of service from the underlying protocol layers. The wireless links, however, provide only an unreliable communication channel that suffers from temporal outages. As a consequence, protocol mechanisms are needed that, based on the unreliable wireless links, provide the different service qualities required by the emerging applications. We identify the emerging IP-based applications for 3G and 4G wireless systems and categorize their QoS requirements. We discuss the wireless access mechanisms that show promise as the basis for supporting these applications. We then propose a set of protocol mechanisms that, based on the discussed wireless access mechanisms, provide the required QoS for the different application categories.     

Novel bipolar differential input/output current-controlled current source

A new bipolar differential input/output current-controlled current source (CCCS) is described. The basic cell consists of a translinear array of six transistors with two bipolar inputs, and is suited for the input stage of a differential current-mode operational amplifier.     

An analytical model for I-V and small-signalcharacteristics of planar-doped HEMTs

An analytical current-voltage (I-V) model for planar-doped HEMTs is developed. This compact model covers the complete range of I-V characteristics, including the current saturation region and parasitic conduction in the electron-supplying layer. Analytical expressions for the small-signal parameters and current-gain cutoff frequency are derived from the I-V model. Modeling results for a 0.1-μm-gate planar-doped AlInAs-GaInAs HEMT show excellent agreement with measured characteristics. Threshold voltages and parasitic conduction in planar-doped and uniformly doped HEMTs are also compared and discussed     

Optimality problem for infinite dimensional bilinear systems

For any finite dimensional control system with arbitrary cost, Pontryagin's Maximum Principle (PMP) [N. Bensalem, Localisation des courbes anormales et problème d'accessibilité sur un groupe de Lie hilbertien nilpotent de degré 2, Thèse de doctorat, Université de Savoie, 1998. [6]] gives necessary conditions for optimality of trajectories. In the infinite dimensional case, it is well known that these conditions are no more true in general. The purpose of this paper is to establish an “approached” version of PMP for infinite dimensional bilinear systems, with fixed final time and without constraints on the final state. Moreover, if the set of control is contained in a closed bounded convex subset with operators defining its dynamics are compact, or if it is contained in a finite dimensional space, we get an “exact” version of PMP. We also give two applications of these results. The first one deals with sub-Riemannian geometry on nilpotent Hilbertian Lie groups for which we can define a sub-Riemannian distance. The second one deals with heat equation for which we analyse the necessary conditions to give the optimal controls.