Electrical passivation in hydrogen plasma exposed GaN

Lightly p-doped (3×10¹⁷ cm^-3) GaN grown on GaAs substrates by metal organic molecular beam epitaxy (MOMBE) shows deactivation of the residual acceptors on exposure to a microwave (2.45 GHz) hydrogen plasma at 250°C. Subsequent annealing to 350°C produces further dopant passivation, while higher temperatures (450°C) restore the initial conductivity. These results suggest that hydrogen carrier gases should be avoided during vapour phase growth of III-V nitrides     

Matrix effects in the determination of butyltin compounds in environmental samples by GC AA after hydride generation

Experiments for the determination of mono-, di and tri-butyltin (MBT, DBT and TBT) by hydride generation/gas chromatography/atomic absorption spectrometry in various matrices (sediment, suspended matter, mussel, algae and water) have revealed that poor butyltin recoveries are obtained in sediments displaying high sulphur and hydrocarbon contents; very poor recoveries were also observed for TBT in sediments with high chlorophyll pigment contents as well as in algal samples. It was however not clear whether the hydride generatin was inhibited by these infering compounds, as was previously assumed in the case of hydrocarbons, or whether interferences affected the atomization rate. Further studies were performed to solve this problem in order to validate this method in the case of analyses of, for example, oil-contaminated sediment and algae. This paper presents the results obtained. It is concluded here that the poor recoveries were due to an inhibition of hydride generation rather than to interference at the atomization stage.     

X-ray diffraction study of 'side-on fixed' homopolysiloxanes from nematic to smectic C phases

The X-ray patterns for the nematic phase in a series of side-on fixed polysiloxanes show different kinds of diffuse elements which imply complex short range ordering. A systematic structural study of the evolution of the patterns versus two molecular parameters, namely the spacer length and the length of the terminal aliphatic tails, suggests the possible occurrence of a smectic C phase for certain values of these parameters. Taking into account these tendencies, new synthesis led to a nematic-smectic C polymorphism observed for the first time in side-on fixed polysiloxanes.     

Temperature and modulation characteristics of resonant-cavitylight-emitting diodes

Resonant-cavity light-emitting diodes (RCLED) are novel, high-efficiency light-emitting diodes which employ optical microcavities. These diodes have higher intensities and higher spectral purity as compared to conventional LEDs. Analytical formulas are derived for the enhancement of the spontaneous emission along the optical axis of the cavity. The design rules for high-efficiency operation of RCLEDs are established. The temperature dependence of the emission intensity is analyzed in the range 20-80° and it is described by an exponential dependence with a characteristic temperature of 112 K. The modulation characteristics of RCLEDs exhibit 3 dB frequencies of 580 MHz. Eye diagrams at transmission rates of 622 Mb/s are wide open indicating the suitability of RCLEDs for high-speed data transmission     

Early detection and trellis splicing: reduced-complexity iterativedecoding

The bit-error rate (BER) performance of new iterative decoding algorithms (e,g,, turbodecoding) is achieved at the expense of a computationally burdensome decoding procedure. We present a method called early detection that can be used to reduce the computational complexity of a variety of iterative decoders. Using a confidence criterion, some information symbols, state variables, and codeword symbols are detected early on during decoding. In this way, the computational complexity of further processing is reduced with a controllable increase in the BER. We present an easily implemented instance of this algorithm, called trellis splicing, that can be used with turbodecoding. For a simulated system of this type, we obtain a reduction in the computational complexity of up to a factor of four, relative to a turbodecoder that obtains the same increase in the BER by performing fewer iterations     

Effective index drift from molecular hydrogen diffusion inhydrogen-loaded optical fibres and its effect on Bragg gratingfabrication

When hydrogen loading is used to enhance the photosensitivity of silica-based optical waveguides and fibres, the presence of molecular hydrogen dissolved in the glass matrix changes the effective index of propagation of guided optical modes by as much as 0.05%. Real-time monitoring of the reflectivity spectrum of Bragg gratings written in such conditions shows that the centre wavelength follows the changes in hydrogen concentration due to diffusion and reaction with glass defects     

Impact of local-negative-feedback on the MRS avalanchephotodetector operation

Metal-Resistance-Semiconductor (MRS) photodetectors are characterized by a resistive layer placed in series to an avalanching region. In this paper, we report the characterization of such devices, we define a parameter extraction procedure, and we derive a quantitative model of the MRS operation. Due to the presence of the ohmic layer, the detector works as an ensemble of pixels with separately stabilized operating bias. In this way, compared to avalanche photodiodes (APDs), MRS achieve superior gain uniformity with the same sensitive area. However, there are still aspects of the fabrication technology and of the detector structure which have to be improved     

Analogue micropowered log-domain tone controller for auditoryprostheses

A micropower tone-control circuit comprising two first-order log-domain filters and a subtractor built with MOS transistors in weak inversion is described. The tone-controller is capable of providing bass cut/boost and treble cut operations. This circuit is being used in new designs of a conventional (acoustic) hearing-aid and cochlear implant