Electrical coupling and impulse propagation in anatomically modeledventricular tissue

Computer simulations were used to study the role of resistive couplings on flat-wave action potential propagation through a thin sheet of ventricular tissue. Unlike simulations using continuous or periodic structures, this unique electrical model includes random size cells with random spaced longitudinal and lateral connections to simulate the physiologic structure of the tissue. The resolution of the electrical model is ten microns, thus providing a simulated view at the subcellular level. Flat-wave longitudinal propagation was evaluated with an electrical circuit of over 140,000 circuit elements, modeling a 0.25 mm by 5.0 mm sheet of tissue. An electrical circuit of over 84,000 circuit elements, modeling a 0.5 mm by 1.5 mm sheet was used to study flat-wave transverse propagation. Under normal cellular coupling conditions, at the macrostructure level, electrical conduction through the simulated sheets appeared continuous and directional differences in conduction velocity, action potential amplitude and V˙_max were observed. However, at the subcellular level (10 μm) unequal action potential delays were measured at the longitudinal and lateral gap junctions and irregular wave-shapes were observed in the propagating signal. Furthermore, when the modeled tissue was homogeneously uncoupled at the gap junctions conduction velocities decreased as the action potential delay between modeled cells increased. The variability in the measured action potential was most significant in areas with fewer lateral gap junctions, i.e., lateral gap junctions between fibers were separated by a distance of 100 μm or more     

Short-pulse, eye-safe Nd:YAG laser using cavity-dumping

A short-pulse 1.444-μm laser based on Nd:YAG technology has been demonstrated. The 1.444-μm is eye-safe. With the cavity-dump technique, a pulse of 50 m× and 14 ns was obtained. The beam quality was excellent with an M² of 1.6 by the use of a telescopic resonator. Silicon-window polarizers were used to suppress the 1.06-μm radiation but showed 1.444-μm absorption as well     

On asymptotic approximation of a solution of a boundary-value problem for a nonlinear nonautonomous equation

On the basis of periodic Ateb functions, in the resonance and nonresonance cases, we construct the asymptotic approximation of one-frequency solutions of a boundary-value problem for a nonlinear nonautonomous equation.     

Simplified 0.35-μm flash EEPROM process using high-temperatureoxide (HTO) deposited by LPCVD as interpoly dielectrics and peripheraltransistors gate oxide

A simplified flash EEPROM process was developed using high-temperature LPCVD oxide both as flash cells interpoly dielectrics and as peripheral transistors gate oxide (decoding logic). An O₂ anneal at 850°C lowers charge trapping and interface trap density induced by Fowler-Nordheim injection. However, electron trapping remains slightly higher than with dry thermal oxide. Similar memory charge loss and write-erase endurance are obtained as for ONO-insulated cells. HTO thus proves to have the required quality and reliability to be used in flash EEPROMs     

Evaluation of multicast routing algorithms for real-timecommunication on high-speed networks

Multicast (MC) routing algorithms capable of satisfying the quality of service (QoS) requirements of real-time applications will be essential for future high-speed networks. We compare the performance of all of the important MC routing algorithms when applied to networks with asymmetric link loads. Each algorithm is judged based on the quality of the MC trees it generates and its efficiency in managing the network resources. Simulation results over random networks show that unconstrained algorithms are not capable of fulfilling the QoS requirements of real-time applications in wide-area networks. Simulations also reveal that one of the unconstrained algorithms, reverse path multicasting (RPM), is quite inefficient when applied to asymmetric networks. We study how combining routing with resource reservation and admission control improves the RPM's efficiency in managing the network resources. The performance of one semiconstrained heuristic, MSC, three constrained Steiner tree (CST) heuristics, Kompella, Pasquale, and Polyzos (1992), constrained adaptive ordering (CAO), and bounded shortest multicast algorithm (BSMA), and one constrained shortest path tree (CSPT) heuristic, the constrained Dijkstra heuristic (CDKS) are also studied. Simulations show that the semiconstrained and constrained heuristics are capable of successfully constructing MC trees which satisfy the QoS requirements of real-time traffic. However, the cost performance of the heuristics varies. The BSMA's MC trees are lower in cost than all other constrained heuristics. Finally, we compare the execution times of all algorithms, unconstrained, semiconstrained, and constrained     

Performance of the PAC optical packet network

For multiuser packet communications with unpredictable user demands (e.g., in a local or metropolitan area network), coordination and control of access to the frequency-division multiplexing (FDM) channels are difficult. B. Glance (J. Lightwave Technol., vol.10, pp.1323-1328, Sep 1992) proposed using a simple protection-against-collision (PAC) circuit to solve this media access problem and achieve full optical connectivity. The PAC system has the potential to interconnect hundreds of ports, each transmitting at several gigabits per second. Performance aspects of the PAC optical packet network are discussed here. The delay-throughout performance of this network is analyzed for uniform traffic patterns. The results show that in geographically distributed applications the maximum achievable throughput (normalized to the transmission rate) is typically between 0.4 and 0.5 per channel. In a centralized switch the (normalized) maximum achievable throughput can approach 0.8 per channel     

New lamps for old: the story of electric lighting

Of all the products of electrical technology, none has made a more profound difference to our way of life than the humble light bulb. The author describes the history of the light bulb from the time it was introduced and started to replace gas lamps to the present day. In particular the author discusses the early developments in arc lighting and incandescent filament lamps. The author also discusses the introduction of mercury vapour lamps, fluorescent lamps, and evacuation of the lamps     

An adaptive plasma glucose controller based on a nonlinearinsulin/glucose model

The design of plasma glucose controllers traditionally relies on linear approaches. The implementation of an appropriate nonlinear model of the insulin/glucose regulatory system into an adaptive controller should predict the insulin-dependent glucose removal more reliably and hence provide better control over a wide spectrum of insulin signals. A discretized form of the model leads to a two-step procedure. First, the measured plasma glucose levels associated with the erogeneous glucose infusion rates are used in the estimation of the past removal rates which, in turn, can be expressed as a weighted sum of past insulin inputs and previous values of the removal rate. Parameters of the sum are adjusted on-line by a recursive method of estimation which features a prefiltering of data to account for a corrupting coloured process noise. The same equation is in turn used to predict the time course of the insulin-dependent fractional rate of glucose removal. The performance of the controller. Tested in vivo in three pigs, is presented for various intravenous or subcutaneous rapid injections and staircase infusions of insulin. Plasma glucose is maintained at an average level of 99.9±8.7% of the target value (% set point±coefficient of variation). The controller reacts promptly to large and rapid variations in insulin action. Although control improves with the number of glucose measurements, the prediction of glucose removal allows for some flexibility in the monitoring of the plasma glucose. Sampling frequency varied from a 2 min interval during transient periods to 7 min as steady states were reached     

Vibrational control of crystal growth from liquid phase

Modeling and numerical simulations of the convective flows induced by the vibration of the monocrystal during crystal growth have been performed for two configurations simulating the Cz and FZ methods. This permitted to emphasize the role of different vibrational mechanisms in the formation of the average flows. It is shown that an appropriate combination of these mechanisms can be used to counteract the usual convective flows (buoyancy- and/or thermocapillary-driven) inherent to crystal growth processes from the liquid phase. While vibrational convection is rather complex due to these identified mechanisms, the new modeling used in the present paper opens up very promising perspectives to efficiently control heat and mass transfer during real industrial applications of crystal growth from the liquid phase.