多带抗噪声语音识别算法研究

根据Flether等人的研究,基于感知独立性假设的子带识别方法被用于抗噪声鲁棒语音识别。本文拓展子带方法,采用基于噪声污染假定的多带框架来减少噪声影响。论文不仅从理论上分析了噪声污染假定多带框架在识别性能上的潜在优势,而且提出了多带环境下的鲁棒语音识别算法。研究表明：多带框架不仅回避了独立感知假设要求,而且与子带方法相比,多带方法能更好的减少噪声影响,提高系统识别性能。     

A tree partitioning dynamic policy for OVSF codes assignment in wideband CDMA

This paper proposes some novel techniques to accommodate users with different rate requirements in a wideband code-division multiple-access system employing orthogonal variable spreading factor codes. Two simple static code assignment strategies are first considered, and an improvement based on multicode assignment. Then the new idea of tree partitioning is introduced and used to devise a dynamic code reassignment algorithm. The behavior of these different techniques is experimentally investigated, in terms of call blocking probability and number of required reassignments. The tree partitioning method exhibits very good performances.     

Control system design on a power-split CVT for high-power agricultural tractors

The problem considered in this paper is the design and tuning of the control system of a power-split continuously variable transmission (CVT) used in high-power tractors. Power-split CVTs are characterized by the combination of a traditional mechanical transmission and by a continuously-variable transmission. This guarantees, at the same time, smooth variations of the transmission-ratio and high efficiency of the overall transmission system. The control architecture of an hydrostatic power-split CVT is constituted by three main parts: 1) servo-controller on the current of the valve which drives the hydraulic transmission; 2) a servo-controller on the hydraulic transmission-ratio; and 3) a synchronizer which coordinates the hydraulic and the mechanical parts of the CVT. In this work, these three controllers are fully developed, including: design, implementation, and evaluation on an experimental system.     

Optical intensity-modulated direct detection channels: signal space and lattice codes

Traditional approaches to constructing constellations for electrical channels cannot be applied directly to the optical intensity channel. This work presents a structured signal space model for optical intensity channels where the nonnegativity and average amplitude constraints are represented geometrically. Lattice codes satisfying channel constraints are defined and coding and shaping gain relative to a baseline are computed. An effective signal space dimension is defined to represent the precise impact of coding and shaping on bandwidth. Average optical power minimizing shaping regions are derived in some special cases. Example lattice codes are constructed and their performance on an idealized point-to-point wireless optical link is computed. Bandwidth-efficient schemes are shown to have promise for high data-rate applications, but require greater average optical power.     

Experimental real-time detector of GSM terminals

The authors present an experimental real-time GSM terminal detector, to be installed in a restricted area. The detector triggers terminal signaling, which can be captured.     

Exposed Die-Top Encapsulation Molding for an Improved High- Performance Flip Chip BGA Package

The recent advancement in high- performance semiconductor packages has been driven by the need for higher pin count and superior heat dissipation. A one-piece cavity lid flip chip ball grid array (BGA) package with high pin count and targeted reliability has emerged as a popular choice. The flip chip technology can accommodate an I/O count of more than five hundreds500, and the die junction temperature can be reduced to a minimum level by a metal heat spreader attachment. None the less, greater expectations on these high-performance packages arose such as better substrate real estate utilization for multiple chips, ease in handling for thinner core substrates, and improved board- level solder joint reliability. A new design of the flip chip BGA package has been looked into for meeting such requirements. By encapsulating the flip chip with molding compound leaving the die top exposed, a planar top surface can be formed. A, and a flat lid can then be mounted on the planar mold/die top surface. In this manner the direct interaction of the metal lid with the substrate can be removed. The new package is thus less rigid under thermal loading and solder joint reliability enhancement is expected. This paper discusses the process development of the new package and its advantages for improved solder joint fatigue life, and being a multichip package and thin core substrate options. Finite-element simulations have been employed for the study of its structural integrity, thermal, and electrical performances. Detailed package and board-level reliability test results will also be reported     

A multiwinding modeling method for high frequency transformers and inductors

This paper presents a method to obtain an electric model for transformers and inductors, including both frequency and geometry effects in the windings, which can be linked with existing core models. One-dimensional distributions for magnetic and electric fields are assumed, and from Maxwell's equations an equivalent electric circuit is easily obtained. This equivalent circuit has been included in analog simulators (Spice, AnalogWorkBench, Saber ...), and comparisons between measured and simulated results are shown, both in time domain and in AC sweep, which verify the model accuracy. The model described in this paper allows designers to deal with key issues in the design of high-frequency magnetic components (copper losses, leakage inductance, skin and proximity effects) by using analog simulators, which are usually more familiar to them than finite-element analysis tools.     

On the convergence of the inverses of Toeplitz matrices and its applications

Many issues in signal processing involve the inverses of Toeplitz matrices. One widely used technique is to replace Toeplitz matrices with their associated circulant matrices, based on the well-known fact that Toeplitz matrices asymptotically converge to their associated circulant matrices in the weak sense. This often leads to considerable simplification. However, it is well known that such a weak convergence cannot be strengthened into strong convergence. It is this fact that severely limits the usefulness of the close relation between Toeplitz matrices and circulant matrices. Observing that communication receiver design often needs to seek optimality in regard to a data sequence transmitted within finite duration, we define the finite-term strong convergence regarding two families of matrices. We present a condition under which the inverses of a Toeplitz matrix converges in the strong sense to a circulant matrix for finite-term quadratic forms. This builds a critical link in the application of the convergence theorems for the inverses of Toeplitz matrices since the weak convergence generally finds its usefulness in issues associated with minimum mean squared error and the finite-term strong convergence is useful in issues associated with the maximum-likelihood or maximum a posteriori principles.     

Scaling properties of fracture surfaces on glass strengthened by ionic exchange

In this work the results of the statistical topometric analysis of fracture surfaces of soda-lime-silica glass with and without ionic exchange treatment are reported. In this case, the mechanism of substitution is K⁺-Na⁺. atomic force microscopy (AFM) was employed to record the topometric data from the fracture surface. The roughness exponent (ζ) and the correlation length (ξ) were calculated by the variable bandwidth method. The analysis for both glasses (subjected and non-subjected to ionic exchange) for ζ shows a value ∼0.8, this value agrees well with that reported in the literature for rapid crack propagation in a variety of materials. The correlation length shows different values for each condition. These results, along with those of microhardness indentations suggest that the self-affine correlation length is influenced by the complex interactions of the stress field of microcracks with that resulting from the collective behavior of the point defects introduced by the strengthening mechanism of ionic exchange.     

Optical-transmission characteristics of optical-fiber cables and installed optical-fiber cable networks for WDM systems

Many cables containing 1.3-/spl mu/m zero-dispersion single-mode (SM) optical fibers are installed in trunk and access networks. Recently, there have been a number of studies on wavelength-division-multiplexing (WDM) systems designed to increase transmission capacity and flexibility. If we can construct WDM systems using SM optical-fiber cable networks designed to transmit using wavelengths in the 1.3-/spl mu/m window (O-band), this will prove very effective in reducing construction costs. It is therefore important to examine the wavelength dependence of the transmission characteristics of SM optical-fiber cables and networks that have already been installed and in which several optical fibers are joined. In this paper, we describe the measured optical characteristics of SM optical-fiber cables and installed optical-fiber cable networks at various wavelengths. The optical characteristics were stable in the 1.46 to 1.625-/spl mu/m wavelength range and we confirmed that the installed SM optical-fiber cable networks could be used for WDM system applications.