A CMOS readout amplifier for instrumentation applications

An integrated readout amplifier for instrumentation applications in smart sensor systems is presented. A fully integrated CMOS version of such an amplifier has been developed using switched-capacitor techniques. The amplifier system provides differential input capability, programmable amplification, clock generation, and low-pass filtering on the chip. The output signal is continuous in time and the system can be used without any of the special precautions necessary for sampled-data circuits. Emphasis was put on high PSRR (-63 dB at DC), low noise (10-μV_rms input equivalent wideband noise) and offset, low harmonic distortion, and small amplification error (<0.06% at 4 V_pp). To cover a large field of applications, only slightly different realizations can be used for capacitive sensors as well as for resistive sensor bridges     

Design aspects of MOS-controlled thyristor elements: technology,simulation, and experimental results

2.5-kV thyristor devices have been fabricated with integrated MOS controlled n⁺-emitter shorts and a bipolar turn-on gate using a p-channel DMOS technology. Square-cell geometries with pitch variations ranging from 15 to 30 μm were implemented in one- and two-dimensional arrays with up to 20000 units. The impact of the cell pitch on the turn-off performance and the on-state voltage was studied for arrays with constant cathode area as well as for single-cell structures. By realizing MOS components with submicrometer channel lengths, scaled single cells are shown to turn off with current densities of several kiloamperes per square centimeter at a gate bias of 5 V. In the case of multi-cell ensembles, turn-off performance is limited due to inhomogeneous current distribution. Critical process parameters as well as the device behavior were optimized through multidimensional numerical simulation     

Spatial shape error concealment for object-based image and video coding

In this paper, an original spatial shape error-concealment technique, to be used in the context of object-based image and video coding schemes, is proposed. In this technique, it is assumed that the shape of the corrupted object at hand is in the form of a binary alpha plane, in which some of the shape data is missing due to channel errors. From this alpha plane, a contour corresponding to the border of the object can be extracted. However, due to errors, some parts of the contour will be missing and, therefore, the contour will be broken. The proposed technique relies on the interpolation of the missing contours with Bézier curves, which is done based on the available surrounding contours. After all the missing parts of the contour have been interpolated, the concealed alpha plane can be easily reconstructed from the fully recovered contour and used instead of the erroneous one improving the final subjective impact.     

Very high-order microring resonator filters for WDM applications

High-order microring resonators having from 1 to 11 coupled cavities are demonstrated. These filters exhibit low loss, flat tops, and out-of-band rejection ratios that can exceed 80 dB. They achieve performance that is suitable for commercial applications.     

One-, two-, and three-photon pumped lasing in a novel liquid dye salt system

We report the observation of one-, two-, and three-photon pumped lasing in the same medium, a novel liquid dye salt system when excited by pulsed 0.532-, 1.06-, and /spl sim/1.49-/spl mu/m coherent radiation pulses, respectively. Since the gain medium is a liquid and not a solution, it contains a significantly higher effective dye concentration and, therefore, is highly suitable for multiphoton pumped lasing and optical power limiting applications. The lasing spectra, temporal waveforms, near- and far-field intensity distributions, and output/input efficiency were measured under the conditions of one-, two-, and three-photon pump configurations.     

Online grid measurement and ENS detection for PV inverter running on highly inductive grid

Photovoltaic (PV) and other sources of renewable energy are being used increasingly in grid-connected systems, for which stronger power quality requirements are being issued. Continuous grid monitoring should be considered so as to provide safe connections and disconnections from the grid. This letter gives an overview of the methods used for online grid measurement with PV inverters. Emphasis is placed on a method based on the injection of a noncharacteristic harmonic in the grid. Since this injection is regarded as a disturbance for the grid, different issues, i.e., the influence on total harmonic distortion (THD), the accuracy of line impedance measurement and the ENS (German abbreviation of Main Monitoring units with allocated Switching Devices) detection are studied. Laboratory results conducted on an existing PV inverter are presented to demonstrate the behavior of the PV inverter under different grid conditions. Some of the injection parameters are tuned in order to get an accurate measurement of line impedance.     

A VLIW processor with reconfigurable instruction set for embedded applications

This paper describes a new architecture for embedded reconfigurable computing, based on a very-long instruction word (VLIW) processor enhanced with an additional run-time configurable datapath. The reconfigurable unit is tightly coupled with the processor, featuring an application-specific instruction-set extension. Mapping computation intensive algorithmic portions on the reconfigurable unit allows a more efficient elaboration, thus leading to an improvement in both timing performance and power consumption. A test chip has been implemented in a standard 0.18-/spl mu/m CMOS technology. The test of a signal processing algorithmic benchmark showed speedups ranging from 4.3/spl times/ to 13.5/spl times/ and energy consumption reduced up to 92%.     

Electrical qualification of new ultrathin integration techniques

The aim of this paper is to analyze the feasibility of ultrathin packages through the electrical qualification of the technological process used, i.e. mechanical lapping. It considers polysilicon bipolar transistors which thickness can reach values lower than 10 μm. Forward mode and reverse mode characterizations show no significant degradation of pertinent characteristics, thus allowing to find applications in new compact packaging concept.     

Fabrication of optical fibre nanowires and their optical and mechanical characterisation

It is demonstrated for the first time that long nanowires with radii as small as 30 nm can be manufactured with a conventional coupler fabrication rig. The temporal deterioration of nanowire optical properties has been studied and correlated with its mechanical behaviour. The original transmission properties have been restored by a post-fabrication treatment.     

Uniform Polarization Scattering With Fiber-Coil-Based Polarization Controllers

A detailed study of fiber-coil-based polarization controllers (PCs) is performed. First, a method to deterministically calculate the PC configuration in order to transform between any two states of polarization is presented. In a second stage, the case in which the configuration angles are randomly changed is studied. The cases of a single PC and of the system obtained with the concatenation of several PCs are analyzed. For both cases, a general expression for the variance of the Stokes parameters is obtained. Using this expression, it is demonstrated that it is possible to achieve uniform polarization scattering using a concatenation of fiber-coil-based PCs. Finally, it is shown that fiber-coil-based PCs can be used to emulate both first- and second-order polarization-mode dispersions