The influence of cobalt doping on photocatalytic nano-titania: Crystal chemistry and amorphicity

Photocatalysts of nominal composition (Ti_1−xCo_x)O_2−δ with 0.001?x?0.05 were prepared via a sol-gel technique followed by air firing (200-1000 °C). The incorporation of cobalt inhibited crystal growth and slightly raised the anatase to rutile transformation temperature (∼700 °C). An amorphous component was invariably significant with the maximum content (41-53 wt%) appearing simultaneously with the removal of anatase, suggesting that rutile crystallizes via an aperiodic structure. While the introduction of cobalt shifted the apparent band gap to visible light energies this did not enhance performance as there was limited miscibility of cobalt in titania, non-catalytic secondary phases were present, and active Ti³⁺ sites were displaced by cobalt.     

Ex-vivo NMR of unprocessed tissue in water: a simplified procedure for studying intracranial neoplasms

Ex-vivo and in-vitro nuclear magnetic resonance (NMR) spectroscopy techniques have been used for studying chemical metabolites in surgically resected specimens of human neoplasms, and may provide complementary information to in-vivo whole-body magnetic-resonance spectroscopy (MRS). We describe an ex-vivo NMR in water method for measurement of water-soluble metabolites in unprocessed normal rat brain tissue and human intracranial neoplasms. The NMR spectra obtained using the method described here were comparable to those obtained using high-resolution magic-angle spinning (HRMAS) NMR methods, with good correlation in metabolite concentrations relative to creatine (r ² = 0.7635). Improved spectral resolution and baseline were noted compared to HRMAS, but macromolecule resonances were not detected. Ex-vivo NMR of unprocessed tissue in water is rapid and technically simple to perform, and has the potential to be used for direct assessment of intracranial neoplasms.     

Effect of polyether diamine on gas permeation properties of organic-inorganic hybrid membranes

The quantitative incorporation and high dispersion of platinum nanoparticles into MCM-41 has been carried out by the coordination between Pt(IV) ion and APTMS-anchored MCM-41. Before and after calcination of Pt/APTMS/MCM41 samples, the Pt content in samples was evaluated from home-made photoacoustic spectrometer (PAS). The PAS bands at 350 nm and 450 nm can be assigned to d–d transition bands of Pt complexes. By increasing the concentration of Pt solution, the PAS intensity of Pt/APTMS/MCM41 was increased proportionally up to 1.0×10⁻² M, and remained constant above 1.0×10⁻² M. It can be attributed to the saturation of Pt content within Pt/APTMS/MCM41. The Pt content in the saturated Pt/APTMS/MCM41 was 8.5 wt% (the theoretical value), 9.7 wt% (measured by EDX) and 9.2 wt% (measured by ESCA), respectively. This indicates that the content of Pt precursor within MCM-41 could be controlled by the concentration of Pt precursor solution. The PAS intensity of calcined Pt/APTMS/MCM41's in H₂ flow was increased up to 1.0×10⁻² M and remained nearly constant above 1.0×10⁻² M. Therefore, we suggest that the formation of Pt complexes with APTMS-anchored MCM-41 made it possible to incorporate quantitatively Pt nanoparticles in the range of 0.5–9.2 wt% within MCM-41 channels.     

Ligand-dependent particle size control of PbSe quantum dots

Colloidal solutions of monodisperse PbSe quantum dots (QDs) were synthesized by a hot solution chemical method from a reaction mixture of lead oleate and TOPSe (TOP: tri-n-octylphosphine). The synthesis was carried out at a fixed temperature (170 degrees C) and time, while the particle sizes of the PbSe QDs were controlled by using two different kinds of organic ligands with varied chain length. It was seen that the tuning of PbSe QDs are possible by using the proper molar ratio of the co-ligands, such as acetic acid or hexanoic acid, at a fixed reaction temperature and time, verified by TEM and XRD as well as NIR absorption analysis. The effects of different organic acids were studied and the role of additional organic acids might be due to the extent of ligand exchange efficiency between the Pb oleate and acetic/hexanoic acid in the initial stage, which is caused by the steric hindrance effects of the acids.     

Tailoring wettability change on aligned and patterned carbon nanotube films for selective assembly

The effects of oxygen reactive ion etching (RIE) on the surface wettability of aligned carbon nanotube (CNT) films have been systematically investigated. It was found that 3 s of RIE treatment could change the surface of CNT films from hydrophobic to more hydrophilic. The degree of modification in the surface wettability of the film could be controlled by the flow rate of O2 gas during the RIE process. It is proposed that such a surface hydrophobicity change is related to the opened structure and functionalized tip of as-treated CNTs by oxygen reactive ions. More importantly, after the RIE treatment, focused laser pruning was utilized to trim the surface layer of treated CNTs and revert them back to a hydrophobic surface. Combined with the laser pruning technique and O2 RIE treatment, CNT templates with interlaced wettability surfaces in a stripe pattern have been fabricated. It has been demonstrated that this interlaced and structured wettability pattern can be used to selectively assemble microspheres or quantum dots on the aligned CNT films with desired patterns.     

Oxygen discharge and post-discharge kinetics experiments and modeling for the electric oxygen-iodine laser system

Laser oscillation at 1315 nm on the I(2P1/2)-->I(2P3/2) transition of atomic iodine has been obtained by a near resonant energy transfer from O2(a1Delta) produced using a low-pressure oxygen/helium/nitric oxide discharge. In the electric discharge oxygen-iodine laser (ElectricOIL) the discharge production of atomic oxygen, ozone, and other excited species adds levels of complexity to the singlet oxygen generator (SOG) kinetics which are not encountered in a classic purely chemical O2(a1Delta) generation system. The advanced model BLAZE-IV has been introduced to study the energy-transfer laser system dynamics and kinetics. Levels of singlet oxygen, oxygen atoms, and ozone are measured experimentally and compared with calculations. The new BLAZE-IV model is in reasonable agreement with O3, O atom, and gas temperature measurements but is under-predicting the increase in O2(a1Delta) concentration resulting from the presence of NO in the discharge and under-predicting the O2(b1Sigma) concentrations. A key conclusion is that the removal of oxygen atoms by NOX species leads to a significant increase in O2(a1Delta) concentrations downstream of the discharge in part via a recycling process; however, there are still some important processes related to the NOX discharge kinetics that are missing from the present modeling. Further, the removal of oxygen atoms dramatically inhibits the production of ozone in the downstream kinetics.     

Synthesis and growth mechanism of pentagonal bipyramid-shaped gold-rich Au/Ag alloy nanoparticles

Pentagonal bipyramid-shaped gold-rich Au/Ag alloy nanoparticles are synthesized in ethylene glycol (EG) in the presence of small amounts of AgNO3 and PVP without using Au seeds. The contents of Au and Ag in pentagonal nanobipyramids are determined by energy-dispersive X-ray spectroscopy (EDS). The EDS data demonstrates that this kind of nanoparticles is composed of Au/Ag alloys, not silver monolayers simply covering the surface of Au nanoparticles. Insights into the growth mechanism of pentagonal bipyramid-shaped gold-rich Au/Ag alloy nanoparticles are discussed.     

Metabolite identification by data-dependent accurate mass spectrometric analysis at resolving power of 60,000 in external calibration mode using an LTQ/Orbitrap

Performance evaluation of accurate mass measurement by the LTQ/Orbitrap, at a resolving power of 60,000 and in external calibration mode, indicated that the Orbitrap is capable of providing high mass accuracy of <2 ppm for over 24 h post-calibration. This, together with limited trade-off between sensitivity and resolving power plus a wide dynamic range for mass accuracy, suggested that the LTQ/Orbitrap is an ideal analytical tool for structural elucidation of metabolites. The application of the LTQ/Orbitrap to identification of human liver microsomal metabolites of carvedilol was evaluated, using parent mass list triggered data-dependent multiple-stage accurate mass analysis, at a resolving power of 60,000 in external calibration mode. A metabolite identification workflow was developed to utilize chemical formulas from high-resolution accurate mass measurements to confirm structures of product ions of a drug proposed by Mass Frontier, illustrated by identification of structures used to establish lineage of product ions of carvedilol, which later served as a template for identification of its metabolites. A total of 58 in vitro metabolites of carvedilol were detected using 5-ppm mass tolerance filters for theoretical m/z of protonated molecules of predicted metabolites in addition to product ions and neutral mass losses diagnostic of carvedilol. The chemical formulas with unsaturation numbers calculated from the accurate m/z of precursor and product ions can be used to assign, with a high degree of confidence, the structures of metabolites and the sites of metabolism. The mass accuracies obtained for all full scan MS and MSn spectra were <2 ppm. The majority of the metabolites identified agreed with those previously reported except for those that have not been reported before. For example, several glutathione conjugates of carvedilol were reported for the first time, which may explain the reported hepatotoxicity during clinical trials and recent clinical use.     

Mechanism‐Guided Design and Synthesis of a Mitochondria‐Targeting Artemisinin Analogue with Enhanced Anticancer Activity

Understanding the mechanism of action (MOA) of bioactive natural products will guide endeavor to improve their cellular activities. Artemisinin and its derivatives inhibit cancer cell proliferation, yet with much lower efficiencies than their roles in killing malaria parasites. To improve their efficacies on cancer cells, we studied the MOA of artemisinin using chemical proteomics and found that free heme could directly activate artemisinin. We then designed and synthesized a derivative, ART‐TPP, which is capable of targeting the drug to mitochondria where free heme is synthesized. Remarkably, ART‐TPP exerted more potent inhibition than its parent compound to cancer cells. A clickable probe ART‐TPP‐Alk was also employed to confirm that the attachment of the TPP group could label more mitochondrial proteins than that for the ART derivative without TPP (AP1). This work shows the importance of MOA study, which enables us to optimize the design of natural drug analogues to improve their biological activities.     

Engaging Copper(III) Corrole as an Electron Acceptor: Photoinduced Charge Separation in Zinc Porphyrin–Copper Corrole Donor–Acceptor Conjugates

An electron‐deficient copper(III) corrole was utilized for the construction of donor–acceptor conjugates with zinc(II) porphyrin (ZnP) as a singlet excited state electron donor, and the occurrence of photoinduced charge separation was demonstrated by using transient pump–probe spectroscopic techniques. In these conjugates, the number of copper corrole units was varied from 1 to 2 or 4 units while maintaining a single ZnP entity to observe the effect of corrole multiplicity in facilitating the charge‐separation process. The conjugates and control compounds were electrochemically and spectroelectrochemically characterized. Computational studies revealed ground state geometries of the compounds and the electron‐deficient nature of the copper(III) corrole. An energy level diagram was established to predict the photochemical events by using optical, emission, electrochemical, and computational data. The occurrence of charge separation from singlet excited zinc porphyrin and charge recombination to yield directly the ground state species were evident from the diagram. Femtosecond transient absorption spectroscopy studies provided spectral evidence of charge separation in the form of the zinc porphyrin radical cation and copper(II) corrole species as products. Rates of charge separation in the conjugates were found to be of the order of 10¹⁰ s^?1 and increased with increasing multiplicity of copper(III) corrole entities. The present study demonstrates the importance of copper(III) corrole as an electron acceptor in building model photosynthetic systems.