A biological process for the reclamation of flue gas desulfurization gypsum using mixed sulfate-reducing bacteria with inexpensive carbon sources

A combined chemical and biological process for the recycling of flue gas desulfurization (FGD) gypsum into calcium carbonate and elemental sulfur is demonstrated. In this process, a mixed culture of sulfate-reducing bacteria (SRB) utilizes inexpensive carbon sources, such as sewage digest or synthesis gas, to reduce FGD gypsum to hydrogen sulfide. The sulfide is then oxidized to elemental sulfur via reaction with ferric sulfate, and accumulating calcium ions are precipitated as calcium carbonate using carbon dioxide. Employing anaerobically digested municipal sewage sludge (AD-MSS) medium as a carbon source, SRBs in serum bottles demonstrated an FGD gypsum reduction rate of 8 mg/L/h (10⁹ cells)^-1. A chemostat with continuous addition of both AD-MSS media and gypsum exhibited sulfate reduction rates as high as 1.3 kg FGD gypsum/m³d. The increased biocatalyst density afforded by cell immobilization in a columnar reactor allowed a productivity of 152 mg SO₄ ^-2/Lh or 6.6 kg FGD gypsum/m³d. Both reactors demonstrated 100% conversion of sulfate, with 75–100% recovery of elemental sulfur and chemical oxygen demand utilization as high as 70%. Calcium carbonate was recovered from the reactor effluent on precipitation using carbon dioxide. It was demonstrated that SRBs may also use synthesis gas (CO, H₂, and CO₂ in the reduction of gypsum, further decreasing process costs. The formation of two marketable products—elemental sulfur and calcium carbonate—from FGD gypsum sludge, combined with the use of a low-cost carbon source and further improvements in reactor design, promises to offer an attractive alternative to the landfilling of FGD gypsum.

     

Relative molecular mass information from aliphatic nitro compounds: A chemical ionization study

The mass spectra of a number of aliphatic nitro compounds have been studied using electron Ionization (EI) and a variety of chemical Ionization (CI) techniques in attempts to obtain relative molecular mass information. The use of positive ion ammonia chemical Ionization techniques gave very satisfactory results, providing abundant [M + NH4]⁺ ions, not only from both primary and secondary nitro compounds, but also from the much more labile tertiary nitro compounds. However, the use of methane and isobutane positive ion CI or EI conditions resulted in facile fragmentation with little relative molecular mass information being made available. Negative ion CI using methane, isobutane or ammonia as moderating gases all gave abundant [M ? 1]^? ions with primary and secondary nitro compounds but at much reduced sensitivity.     

Mechanism of UV photoreactivity of alkylsiloxane self-assembled monolayers

A molecular level understanding of the photoreactivity of self-assembled monolayers (SAMs) becomes increasingly important as the spatial resolution starts to be limited by the size of the resist and the spatial extent of the photochemical reactions in photoresist micropatterning. To this end, a number of surface characterization techniques were combined to understand the reactive agents, reactive sites, kinetics, and reaction pathways in the UV photoreactivity of octadecylsiloxane (ODS) SAMs. Quantitative analysis of our results provides evidence that ground state atomic oxygen is the primary reactive agent for the UV degradation of ODS SAMs. UV degradation, which follows zero-order kinetics, results in the scission of alkyl chains instead of the siloxane headgroups. Our results suggest that the top of the ODS SAMs is the preferential reactive site. Using a novel, highly surface sensitive technique, fluorescence labeling of surface species, we identified the presence of submonolayer quantities chemical functional groups formed by the UV degradation. These groups are intermediates in a proposed mechanism based on hydrogen abstraction.     

Quantum correspondence to classical chaos

A simple analysis of the competition between the alternative channels of atom and excitation transfer in collisions of metastable rare-gas atoms with halogens is presented. The intervention of potential surfaces correlating with highly excited Rydberg states lying just below the limit of the molecular cation as well as those which correlate with the anion provides a qualitative rationale for much current experimental data.     

Thin film platinum cuff electrodes for neurostimulation: in vitro approach of safe neurostimulation parameters

Thin film technology takes more and more importance in the development of biomedical devices dedicated to functional neurostimulation. Our research about the design of implant neurostimulating electrode is oriented toward thin film cuff electrodes based on a polyimide substrate covered by a chromium/gold/Pt film. The chromium/gold sputtered film serves as adhesion layer and current collector whereas platinum acts as an electrochemical actuator. The electrode surface has been designed to obey safe stimulation criteria (i.e. chemically inert noble metal, low electrode-electrolyte impedance, high electrochemical reversibility, high corrosion stability). The electrochemical behaviour of such platinum electrodes has been assessed and compared to a foil of platinum. Extensive in vitro characterisations of the both electrode types were carried out using AFM, SEM and electrochemical techniques. The role of enhanced surface roughness enabling high double layer capacitances to be achieved was clearly highlighted. The obtained results are discussed, with particular reference to thin film electrodes stability under in vitro electrical stimulation in NaCl 0.9% (physiological serum). Therefore, these thin film devices showed reversible PtOH formation and decomposition making them potentially attractive for the fabrication of implant stimulation cuff electrodes.     

Spontaneous dissolution of a single-wall carbon nanotube salt

Upon reduction with alkali metals, single-wall carbon nanotubes (SWNTS) are shown to form polyelectrolyte salts that are soluble in polar organic solvents without any sonication, use of surfactants, or functionalization whatsoever, thus forming true thermodynamically stable solutions of naked SWNTs.     

Photophysical properties of anthanthrene-based tunable blue emitters

Anthanthrene (1) derivatives substituted at the 4,10 and 6,12 positions (2-6) were synthesized as promising candidates for organic light emitting diodes (OLEDs). The emission of these compounds can be manipulated in the blue region (lambda(max) = 437-467 nm) through structural modifications. Photophysical and electrochemical properties (phi(F) = 0.20-0.47; tau(F) = 2.97-6.06 ns; HOMO-LUMO energy gap = 2.25-2.56 eV) as well as geometry optimized structures of 1-6 are reported.     

Transition Metal Catalysis Using Functionalized Dendrimers

Dendrimers are well-defined hyperbranched macromolecules with characteristic globular structures for the larger systems. These novel polymers have inspired many chemists to develop new materials and several applications have been explored, catalysis being one of them. The recent impressive strides in synthetic procedures increased the accessibility of functionalized dendrimers, resulting in a rapid development of dendrimer chemistry. The position of the catalytic site(s) as well as the spatial separation of the catalysts appears to be of crucial importance. Dendrimers that are functionalized with transition metals in the core potentially can mimic the properties of enzymes, their efficient natural counterparts, whereas the surface-functionalized systems have been proposed to fill the gap between homogeneous and heterogeneous catalysis. This might yield superior catalysts with novel properties, that is, special reactivity or stability. Both the core and periphery strategies lead to catalysts that are sufficiently larger than most substrates and products, thus separation by modern membrane separation techniques can be applied. These novel homogeneous catalysts can be used in continuous membrane reactors, which will have major advantages particularly for reactions that benefit from low substrate concentrations or suffer from side reactions of the product. Here we review the recent progress and breakthroughs made with these promising novel transition metal functionalized dendrimers that are used as catalysts, and we will discuss the architectural concepts that have been applied.     

Apparent slip due to the motion of suspended particles in flows of electrolyte solutions

We consider pressure-driven flows of electrolyte solutions in small channels or capillaries in which tracer particles are used to probe velocity profiles. Under the assumption that the double layer is thin compared to the channel dimensions, we show that the flow-induced streaming electric field can create an apparent slip velocity for the motion of the particles, even if the flow velocity still satisfies the no-slip boundary condition. In this case, tracking of the particles would lead to the wrong conclusion that the no-slip boundary condition is violated. We evaluate the apparent slip length, compare it with experiments, and discuss the implications of these results.     

Detection and measurement of noncoincidence between the principal axes of the g-matrix and zero-field splitting tensor using multifrequency powder EPR spectroscopy: application to cis-[(NH(3))(2)Pt(1-MeU)(2)Cu(H(2)O)(2)](SO(4)) x 4.5H(2)O (1-MeU = monoanion of 1-methyluracil)

Multifrequency continuous wave EPR spectra (4-34 GHz) on a powder of the title compound are consistent with a spin-triplet state. This arises from interaction between centrosymmetrically related pairs of copper(II) ions in the solid. The spectra at all frequencies have been simulated with a single set of spin-Hamiltonian parameters. The results show that there is noncoincidence between the principal axes of the g-matrices on each copper center and those of the zero-field splitting (D) tensor. This noncoincidence is a single rotation of 33 degrees +/- 2 degrees. The parameters from the powder spectra have been verified by a subsequent single-crystal EPR study which yielded the spin-Hamiltonian parameters g(XX) = 2.074, g(YY) = 2.093, g(ZZ) = 2.385, D(XX) = +/-0.0228 cm(-1), D(YY) = +/-0.0211 cm(-1), D(ZZ) = -/+0.0439 cm(-1) with Euler angles of alpha = 179 degrees, chi = 33.4 degrees, and gamma = 328 degrees. Analysis of the zero-field splitting tensor in terms of exchange indicates that the interaction between the pairs of copper(II) ions is almost entirely dipolar in origin. This study shows that multifrequency EPR spectroscopy on powders, coupled with spectrum simulation, can detect and measure noncoincidence between the principal axes of the g-matrix and zero-field splitting tensor, and does not necessarily require the presence of metal hyperfine interactions.