Synthesis and spectral characterization of some new azo dyes and their metal complexes

A series of azo-metal chelate dyes have been synthesized by coupling substituted o-nitroaniline and p-t-/s-butylphenol. The spectral characterization of the azo dyes containing o-hydroxy group and azo-metal(II) chelate [metal(II): Cu, Ni, Co] dyes by IR spectra, UV–VIS spectra, NMR spectra, elemental analysis and magnetic susceptibility techniques are reported. The stoichiometry of the azo-metal chelates was determined by the spectroscopic titration method to be 1:2 (ML₂).     

Synthesis, Metal Complexation and Spectroscopic Characterization of Three New Azo Compounds

The synthesis of azo compounds [4-(N'-2-thiazol-2-ylsulfanyl)-4'-hydroxyazo benzene (1), 4-(N'-2-thiazol-2-ylsulfanyl)-2'-hydroxy-5-tert-butylazobenzene (2), 7-[4-(N'-2-thiazol-2-ylsulfanyl)phenylazo-8-hydroxy quinoline (3)] have been carried out by reacting phenol, 4-tert-butyl phenol and 8-hydroxy quinoline with N'-2-thiazol-2-ylsulfanylamide as coupling component. The resulting ligands (2 and 3) were treated with two transition metal salts (e.g., CuCl₂2H₂O andNiCl₂6H₂O). Cu(II) and Ni(II) complexes of the azo derivative ofphenol were obtained and characterised by IR, UV-Vis, ¹H NMR, spectroscopic and elemental analysis techniques. All the complexes have a metal : ligand ratio of 1 : 2 and are square-planar.     

Hydromagnetic flow between two porous disks rotating about non-coincident axes

Hydromagnetic flow between two porous disks rotating with same angular velocity Ω about two noncoincident axes has been studied in the presence of a uniform transverse magnetic field. An exact solution of the governing equations has been obtained in a closed form. It is found that the primary velocity f/Ωl increases and the secondary velocity g/Ωl decreases with increase in either Reynolds number Re or the Hartman number M. It is also found that the torque at the disk η= 0 increases with increase in either M^2 or K^2. On the other hand there is no torque at the disk η= 1 for large M^2 and K^2. The heat transfer characteristic has also been studied on taking viscous and Joule dissipation into account. It is seen that the temperature increases with increase in either M^2 or K^2. It is found that the rate of heat transfer at the disk η= 0 increases with increase in either M or K. On the other hand the rate of heat transfer at the disk η= 1 increases with increase in K but decreases with increase in M.     

Platelet‐in‐Box Colloidal Quantum Wells: CdSe/CdS@CdS Core/Crown@Shell Heteronanoplatelets

Here, the CdSe/CdS@CdS core/crown@shell heterostructured nanoplatelets (NPLs) resembling a platelet‐in‐box structure are developed and successfully synthesized. It is found that the core/crown@shell NPLs exhibit consistently substantially improved photoluminescence quantum yield compared to the core@shell NPLs regardless of their CdSe‐core size, CdS‐crown size, and CdS‐shell thickness. This enhancement in quantum yield is attributed to the passivation of trap sites resulting from the critical peripheral growth with laterally extending CdS‐crown layer before the vertical shell growth. This is also verified with the disappearance of the fast nonradiative decay component in the core/crown NPLs from the time‐resolved fluorescence spectroscopy. When compared to the core@shell NPLs, the core/crown@shell NPLs exhibit relatively symmetric emission behavior, accompanied with suppressed lifetime broadening at cryogenic temperatures, further suggesting the suppression of trap sites. Moreover, constructing both the CdS‐crown and CdS‐shell regions, significantly enhanced absorption cross‐section is achieved. This, together with the suppressed Auger recombination, enables the achievement of the lowest threshold amplified spontaneous emission (≈20 μJ cm^?2) from the core/crown@shell NPLs among all different architectures of NPLs. These findings indicate that carefully heterostructured NPLs will play a critical role in building high‐performance colloidal optoelectronic devices, which may even possibly challenge their traditional epitaxially grown thin‐film based counterparts.     

Determination of naproxen in human plasma by GC–MS

This paper describes a GC–MS method for the determination of naproxen in human plasma. Naproxen and internal standard ibuprofen were extracted from plasma using a liquid–liquid extraction method. Derivatization was carried out using N‐methyl‐N‐(trimethylsilyl)trifluoroacetamide. The calibration curve was linear between the concentration range of 0.10–5.0 μg/mL. Intra‐ and interday precision values for naproxen in plasma were <5.14, and accuracy (relative error) was better than 4.67%. The extraction recoveries of naproxen from human plasma were between 93.0 and 98.9%. The LOD and LOQ of naproxen were 0.03 and 0.10 μg/mL, respectively. Also, this assay was applied to determine the pharmacokinetic parameters of naproxen in six healthy Turkish volunteers who had been given 220 mg naproxen.     

New steps in acute coronary syndrome and antihyperlipidemic treatment: Determination of statins and metabolites by liquid chromatography tandem mass spectrometry

Our aim in this study was to develop a validated liquid chromatography–tandem mass spectrometry (LC–MS/MS) method for the measurement of atorvastatin, rosuvastatin and their major metabolites, and furthermore to evaluate patients’ adherence to statin therapy and to investigate the effect of statin therapy on various hematological and biochemical parameters. A simple protein precipitation was performed for the extraction of analytes and the extracted samples were injected directly. The levels of drugs and their metabolites were measured by the validated method in a total of 210 patients diagnosed with unstable angina pectoris (USAP), ST-elevation myocardial infarction (STEMI) or non-ST-elevation myocardial infarction (NSTEMI). Various biochemical and hematological parameters were measured. The linearity ranges for atorvastatin and rosuvastatin were 1.22–2,500 and 0.97–2000 ng/ml, respectively. The inter-assay coefficient of variation for all analytes was ≤ 6%. In patients diagnosed with USAP, STEMI and NSTEMI, treatment compliance rates were 22.1, 23.5 and 41.2% for atorvastatin and 36.1, 40.2 and 67.1% for rosuvastatin, respectively. An economical, simple and reliable measurement method has been developed. Our findings support the poor patient compliance with statin therapy in the included population. It was observed that 6 months of statin treatment caused slight changes in biochemical and hematological parameters.     

One‐pot synthesis of organic–inorganic hybrid polyhedral oligomeric silsesquioxane microparticles in a double‐zone temperature controlled microfluidic reactor

Polyhedral oligomeric silsesquioxane (POSS) particles are one of the smallest organosilica nano‐cage structures with high multifunctionality that show both organic and inorganic properties. Until now poly(POSS) structures have been synthesized from beginning with a methacryl‐POSS monomer in free‐radical mechanism with batch‐wise methods that use sacrificial templates or additional multisteps. This study introduces a novel one‐pot synthesis inside a continuous flow, double temperature zone microfluidic reactor where the methodology is based on dispersion polymerization. As a result, spherical monodisperse POSS microparticles were obtained and characterized to determine their morphology, surface chemical structure, and thermal behavior by SEM, FTIR, and TGA, respectively. These results were also compared and reported with the outcomes of batch‐wise synthesis. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1396–1403     

Selenolation of Aryl Iodides and Bromides Enabled by a Bench-Stable PdI Dimer

The use of an air- and moisture-stable dinuclear Pd^I complex as an efficient catalyst for the formation of C(sp²)−SeR bonds is here reported. The privileged reactivity of the Pd^I dimer allows for the direct use of selenolates as nucleophiles in the cross-coupling. Although previous methodologies suffer from catalyst poisoning through the formation of Pd-ate complexes, the mechanistically distinct dinuclear Pd^I catalyst circumvents this challenge. A wide variety of aryl bromides and iodides were efficiently coupled under relatively mild reaction conditions with broad functional group tolerance. Mechanistic and computational data are presented in support of direct Pd^I reactivity.     

Encapsulation of inorganic particles via miniemulsion polymerization

The encapsulation of TiO₂ particles via miniemulsion polymerization is strongly dependent on the size and stability of the inorganic particles in the monomer medium in which they are initially dispersed. It was found from XPS and FT‐IR studies that both the hydrophilic and hydrophobic TiO₂ particles, which were studied, have hydroxyl groups present on their surfaces, which can strongly interact with the amine end‐groups of the polymeric stabilizer, OLOA370 (polybutene‐succinimide diethyl triamine). It was found from the dispersion and adsorption studies that the amount of OLOA370 retained on the TiO₂ particles is strongly dependent on the area exposed by the sonification that is applied to break up the aggregates in the dispersion process. The TiO₂ dispersions in styrene monomer were themselves dispersed as miniemulsion droplets and subsequently polymerized. It was concluded from the density gradient column (DGC) analysis of the latexes obtained from the encapsulation polymerizations, that the stability of the inorganic particles in the monomer, as well as their particle size, significantly influence the encapsulation efficiencies. The use of the hydrophilic titanium dioxide particles in combination with the stabilizer, OLOA370, resulted in a good dispersibility, dispersion stability, and small TiO₂ particle size. This lead to better encapsulation efficiencies compared to the hydrophobic particles. The poorer results obtained with the hydrophobic TiO₂ particles were attributed to their larger particle size, which resulted from the reduced adsorption of the OLOA370. Fewer hydroxyls and the presence of the trimethoxy octyl silane (TMOS) groups, which themselves are unable to provide sufficient steric stability, are proposed to explain these findings.     

The photocopy method: measuring living chain distributions in radical polymerization

We have developed a method to measure living chain molecular weight distributions (MWDs) in free radical polymerization (FRP). By laser photolysis of photoinhibitor molecules included in the polymerizing mixture, the living chains are instantaneously flooded with small molecule radicals carrying fluorescent labels. These radicals react with living chain radical end groups, kinetically freezing growth of living chains and simultaneously end -labelling them: the living chain population has been photocopied. The living MWD is obtained from subsequent analysis by GPC equipped with fluorescence detection. We have measured low conversion thermally initiated PMMA living MWDs, Exponential behaviour is found for large chain length N, in accord with classical Flory-Schultz theory, but at smaller N we establish strong deviations, consistent with the stretched exponential predicted by modern FRP theory incorporating first principles chain length dependencies of termination rate constants. However, this behaviour may derive at least partially from distortions produced by the photocopying technique which can generate power law or logarithmic forms at small N.