The chemical synthesis of conductive polyaniline doped with dicarboxylic acids

The chemical polymerization of aniline was carried out in media containing different linear dicarboxylic acids with the use of oxidants such as K₂Cr₂O₇, KMnO₄, K₂S₂O₈, KIO₃ and FeCl₃. The highest yield and the conductivity were observed with K₂Cr₂O₇. The yield and the conductivity of the polyaniline (PAn) synthesized were observed to decrease in the order of oxalic acid > malonic acid > succinic acid > glutaric acid > adipic acid > phthalic acid. The solubility tests carried out in solvents such as DMF, DMSO and NMP showed that the larger the dopant molecule, the higher is the solubility of polyaniline. The PAn synthesized was characterized by measurements of conductivity, intrinsic viscosity, density and FTIR, UV-VIS and TGA techniques.     

Building an Iron Chromophore Incorporating Prussian Blue Analogue for Photoelectrochemical Water Oxidation

The replacement of traditional ruthenium-based photosensitizers with low-cost and abundant iron analogs is a key step for the advancement of scalable and sustainable dye-sensitized water splitting cells. In this proof-of-concept study, a pyridinium ligand coordinated pentacyanoferrate(II) chromophore is used to construct a cyanide-based CoFe extended bulk framework, in which the iron photosensitizer units are connected to cobalt water oxidation catalytic sites through cyanide linkers. The iron-sensitized photoanode exhibits exceptional stability for at least 5 h at pH 7 and features its photosensitizing ability with an incident photon-to-current conversion capacity up to 500 nm with nanosecond scale excited state lifetime. Ultrafast transient absorption and computational studies reveal that iron and cobalt sites mutually support each other for charge separation via short bridging cyanide groups and for injection to the semiconductor in our proof-of-concept photoelectrochemical device. The reorganization of the excited states due to the mixing of electronic states of metal-based orbitals subsequently tailor the electron transfer cascade during the photoelectrochemical process. This breakthrough in chromophore-catalyst assemblies will spark interest in dye-sensitization with robust bulk systems for photoconversion applications.     

Synthesis and characterization of azo-linked Schiff bases and their nickel(II), copper(II), and zinc(II) complexes

Azo compounds were prepared by coupling of benzenediazonium chloride ions with 1-amino-2-hydroxy-4-naphthalene sulfonic acid under alkaline conditions, and Schiff bases, L_1–3 were then obtained by the condensation of 1-amino-2-hydroxy-3-(phenylazo)-4-naphthalene sulfonic acid, 1-amino-2-hydroxy-3-(4-ethylphenylazo)-4-naphthalene sulfonic acid, and 1-amino-2-hydroxy-3-(4-nitrophenylazo)-4-naphthalene sulfonic acid with salicylaldehyde. New copper(II), nickel(II), and zinc(II) complexes of the Schiff base ligands were also prepared and characterized by spectroscopic methods, magnetic measurements, elemental, and thermogravimetric analysis.     

A Computational Study of the Wallach Rearrangement

Treatment of azoxybenzene and its derivatives with acids is known to result in the Wallach rearrangement, which leads to 2- or4-hydroxyazobenzenes. Starting in the 1960s, experimental findings have lead to the proposal of several mechanisms for this rearrangement. In this work, molecular orbital theory employing the semiempirical AM1 method is used to locate and discuss the energetics of the intermediates and the transition states for this rearrangement. Based on the results of AM1 calculations in vacuum and in solution, the most plausible mechanistic pathways are proposed and discussed.     

Potential Anomaly Separation and Archeological Site Localization Using Genetically Trained Multi‐level Cellular Neural Networks

In this paper, a supervised algorithm for the evaluation of geophysical sites using a multi‐level cellular neural network (ML‐CNN) is introduced, developed, and applied to real data. ML‐CNN is a stochastic image processing technique based on template optimization using neighborhood relationships of the pixels. The separation/enhancement and border detection performance of the proposed method is evaluated by various interesting real applications. A genetic algorithm is used in the optimization of CNN templates. The first application is concerned with the separation of potential field data of the Dumluca chromite region, which is one of the rich reserves of Turkey; in this context, the classical approach to the gravity anomaly separation method is one of the main problems in geophysics. The other application is the border detection of archeological ruins of the Hittite Empire in Turkey. The Hittite civilization sites located at the Sivas‐Altinyayla region of Turkey are among the most important archeological sites in history, one reason among others being that written documentation was first produced by this civilization.     

The radiation pattern of a surface loaded ellipsoidal reflector

The radiation patterns of the focus-fed axially symmetric and loaded ellipsoidal antennas inE- andH-planes are calculated by using the generalized method of geometrical theory of diffraction (GTD). The chosen loads are resistive types which are described in terms of surface impedances.     

Sol–gel synthesis of IPTES and D10H consisting fluorinated silane system for hydrophobic applications

In this study, new fluorinated silane system was prepared by adding hydroxyl terminated Fluorolink D10H oligomer to 3-isocyanatopropyltrietoxysilane. The obtained silane system was independently composed with 3-Glycidyloxypropyltrimethoxysilane and 3-Glycidyloxy-propyltriethoxysilane. Then the prepared two different coating solutions were applied to glass surface by spin-coating method. The chemical bonding between groups in system was investigated by FTIR analysis. The elemental composition of coatings was determined by using EDX analysis. Their structure and surface properties were analyzed by scanning electron microscopy, atomic force microscopy, contact angle measurement and UV–vis spectrophotometer. The amounts of fluorine on the coatings prepared with IPTES-D10H-GLYEO and IPTES-D10H-GLYMO were 33 and 34 %wt, respectively. Transparent coatings with smooth surface and uniform thickness were obtained. The coatings had nanoscale roughness. The contact angles of coatings for water were range from 103° to 110°, and for n-hexadecane were range from 59° to 62°.     

Effect of amine catalysts on preparation of nanometric SiO<Subscript>2</Subscript> particles and antireflective films via sol–gel method

SiO₂ sols were prepared by hydrolysis and condensation reactions of tetraethyl orthosilicate through a one step acid or a two step acid + base catalysis process, in the presence of nitric acid and four different base catalyzers, namely trimethylamine, triethylamine, tripropylamine and tributylamine. Hydrolysis of TEOS was followed by FT-IR analyses. Particle size distributions of the sols were evaluated after predetermined durations in 1–22 days. Particle growth was seen to be faster in amine catalyzed systems than in one step acid catalyzed system. The highest rate of growth was in triethylamine catalyzed system. Glass substrates were dip coated with the prepared SiO₂ sols. Effect of sol aging duration on film thickness and on light transmittance properties of the films was investigated with respect to type of base catalyst. Thicknesses of the films which were measured to be in the range of 100–400 nm, were seen to increase with aging duration of the sols. Triethylamine catalyzed system presented the highest film thickness. Films obtained from one step acid catalyzed system presented an increase of 4.8%; whereas acid + base catalyzed films provided an increase in the light transmittance of 5.7% in the first 4 days of aging. Surfaces of films were examined by FESEM and AFM. The antireflective character of the films was verified by diffuse reflectance analyses.     

Resonant frequency of an air gap tuned circular disc microstrip antenna

In this study, the formulation and the computation of the resonant frequency of an air gap tuned circular disc microstrip antenna are simplified, with improved accuracy, by using a new and very simple effective permittivity expression which is valid for thin and thick gaps. Very good agreement between the theoretical and the experimental resonant frequency values is obtained for the various structural parameters and operational modes.     

The finite-size scaling study of the specific heat and the Binder parameter for the six-dimensional Ising model

The six-dimensional Ising model with nearest-neighbor pair interactions is simulated on the Creutz cellular automaton by using the finite-size lattices with the linear dimensions L=4,6,8,10. The temperature variations and the finite-size scaling plots of the specific heat and Binder parameter verify the theoretically predicted expression near the infinite lattice critical temperature. The approximate values for the critical temperature of the infinite lattice T_C=10.838(1), T_C=10.836(20) and T_C=10.835(1) are obtained from the intersection points of specific heat curves, Binder parameter curves and the straight line fit of specific heat maxima, respectively. These results are in agreement with the more precise value of T_C=10.835(5). The value obtained for the critical exponent of the specific heat, i.e., =0.012(2) is also in agreement with =0 predicted by the theory.