Synthesis and characterization of nickel sulfide nanoparticles via cyclic microwave radiation

In current study, nanoparticles of NiS were synthesized by applying microwave radiation. The effect of concentration of sulfur source, reaction time, and power of microwave irradiation on the treatment process was investigated. The morphology, structure, and composition of the as-synthesized nanostructures have been confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Optical properties of as-prepared sample were investigated by photoluminescence spectroscopy; the emission peak is at 555.04 nm and shows the blue shift.     

Applications of thermal analysis in quality control of solidification processes

Summary Thermal analysis is widely used to determine solidification characteristics of metals and alloys in various metallurgical processes. Computer-Aided Cooling Curve Analysis (CA-CCA) is the most popular thermal analysis technique because of its ease of use and low cost. This paper discusses the principles of CA-CCA and zero curve calculations. The methods for calculating key solidification characteristics of metals from cooling curves are presented, and their importance in the quality control of manufacturing processes are demonstrated. Examples are presented for cast iron, copper and aluminum alloys.     

ADVISOR-based model of a battery and an ultra-capacitor energy source for hybrid electric vehicles

An energy source is the heart of a hybrid electric vehicle. If it is capable of supplying enough power at all times, then it is an adequate source. Major problems presently facing the industry include the size, cost, and efficiency of the energy source. The primary energy source presently used in automotive systems is a battery. In order to reduce the cost of the battery, the current needs to be decreased and stabilized so it is not very erratic. The purpose of this paper is to introduce and justify the use of a new model for an energy source: a battery in parallel with an ultra-capacitor. The ultra-capacitor can supply a large burst of current, but cannot store much energy. Conversely, the battery can store mass amounts of energy; however, without expensive and inefficient units, a battery cannot provide the current that the ultra-capacitor can. By combining the two energy sources in parallel, the storage and peak current characteristics desired can be achieved. The standards of the vehicle are not degraded, allowing this to be a promising technique to incorporate into hybrid electric vehicles to reduce their cost and increase the efficiency of their energy-source system.     

Pulse regulation control technique for integrated high-quality rectifier-regulators

The pulse regulation control scheme is presented and applied to the boost integrated flyback rectifier/energy storage dc/dc (BIFRED) converter as the most popular member of the integrated high-quality rectifier-regulators (IHQRR). In contrast to the conventional control techniques, the principal idea of pulse regulation is to regulate the output voltage using a series of high- and low-power pulses generated by the current of the input inductor, which is operating in discontinuous conduction mode (DCM). Analysis of the BIFRED converter operating in DCM is presented. Fundamentals of pulse regulation as well as its stability analysis and the estimation of the output voltage ripple are introduced. Experimental results on a prototype converter are also presented to validate the analytical and simulation results.     

Curcumin reduces α-synuclein induced cytotoxicity in Parkinson's disease cell model

Background  

Overexpression and abnormal accumulation of aggregated α-synuclein (αS) have been linked to Parkinson's disease (PD) and other synucleinopathies. αS can misfold and adopt a variety of morphologies but recent studies implicate oligomeric forms as the most cytotoxic species. Both genetic mutations and chronic exposure to neurotoxins increase αS aggregation and intracellular reactive oxygen species (ROS), leading to mitochondrial dysfunction and oxidative damage in PD cell models.     

A Compensation Technique for Smooth Transitions in a Noninverting Buck–Boost Converter

With the advent of battery-powered portable devices and mandatory adoption of power factor correction, noninverting buck-boost converters are garnering lots of attention. Conventional two-switch or four-switch noninverting buck-boost converters choose their operation modes by measuring input and output voltage magnitude. The criterion for the selection of the operation mode can cause higher output voltage transients in the neighborhood, where input and output are close to each other. For the mode selection, due to the voltage drops raised by the parasitic components, it is not enough just to compare the magnitude of input and output voltages. In addition, the difference in the minimum and maximum effective duty cycles between controller output and switching device yields discontinuity at the instant of mode change. Moreover, the different properties of output voltage versus a given duty cycle of buck and boost operating modes contribute to the output voltage transients. In this paper, the effect of the discontinuity due to the effective duty cycle derived from the device switching time at the mode change is analyzed. A technique to compensate the output voltage transient due to this discontinuity is proposed. In order to attain additional mitigation of output transients and a linear input/output voltage characteristic in buck and boost modes, the linearization of DC gain of the large-signal model in boost operation is analyzed as well. Analytical, simulation, and experimental results are presented to validate the proposed theory.     

A Novel Digital Control Technique for Brushless DC Motor Drives

Brushless DC (BLDC) motor drives are continually gaining popularity in motion control applications. Therefore, it is necessary to have a low cost, but effective BLDC motor speed/torque regulator. This paper introduces a novel concept for digital control of trapezoidal BLDC motors. The digital controller was implemented via two different methods, namely conduction-angle control and current-mode control. Motor operation is allowed only at two operating points or states. Alternating between the two operating points results in an average operating point that produces an average operating speed. The controller design equations are derived from Newton's second law. The novel controller is verified via computer simulations and an experimental demonstration is carried out with the rapid prototyping and real-time interface system dSPACE.     

The Role of Y<Subscript>2</Subscript>O<Subscript>3</Subscript> and MgO Additives on the Photoluminescence Properties of Si<Subscript>3</Subscript>N<Subscript>4</Subscript> Nanoparticles

The current research addressed synthesizing and studying photoluminescence studies of β-Si₃N₄ nanoparticles. The effect of MgO and Y₂O₃ as the typical additives on photoluminescence behaviour was evaluated. The β-Si₃N₄ with MgO and Y₂O₃ additive specimens were fabricated by a solid state technique (ball-milled method). The as-prepared products were characterized by X-ray diffraction technique, transmission electron microscopy, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and Raman analysis. The results showed that after ball-milled process, hexagonal β-Si₃N₄ with MgO or Y₂O₃ as the additives with the size distribution of 45–50 nm was obtained. The optical properties of the as-synthesized product were also investigated by photoluminescence and diffuse reflection spectroscopy. The obtained results confirmed that employing MgO as an additive, in comparison to the Y₂O₃, could enhance emission properties in the synthesized silicon nitride nanoparticles. The obtained results also showed that MgO–Si₃N₄ pair acted as FRET system to enhance the emission intensity of β-Si₃N₄ nanoparticles.     

RQAR: Location-free reliable and QoS-aware routing protocol for mobile sink underwater wireless sensor networks

Underwater Wireless Sensor Networks (UWSNs) have attracted attention from academics and industries due to many applications such as pollution monitoring, military, tsunami warning, and underwater exploration. One of the effective factors in these applications is efficient communication between underwater sensors. But this process is very challenging in UWSNs due to special conditions and underwater harsh environments. Therefore, designing routing protocols for efficient communication between sensors and sink is an important issue in UWSNs. In this context, this paper proposed a location-free Reliable and QoS-Aware Routing (RQAR) protocol for mobile sink UWSNs. RQAR designed using Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) and does not require the position information of the sensor nodes, which is cumbersome and difficult to obtain. Proposed protocol considers multiple parameters including link quality, hop count, congestion, and residual energy for qos support, and reliable data delivery RQAR also minimizes the effects of hole occurrence by increasing the transmission range as much as possible and ensures communication stability. The simulation results using NS2 showed the superiority of RQAR in improving end-to-end delay, packet delivery ratio, and network throughput compared to the previous methods.     

Single-electron effect in PtSi/porous Si Schottky junctions

PtSi/porous Si schottky junctions exhibit a breakdown type current-voltage (I-V) curve in reverse bias mode. Below breakdown their current density is much less than regular PtSi/Si junctions. The breakdown voltage decreases with application of infrared radiation for both n and p-type junctions. N-type junctions are sensitive to IR wavelengths of up to 7 /spl mu/m even at room temperature. The small reverse bias current, the change of breakdown voltage with radiation, and IR sensitivity at room temperature can all be explained by single-electron effect. Numerical results show that representative porous schottky junctions exhibit depletion capacitances in 10/sup -19/ f range which is enough to observe single-electron effect at room temperature. Single-electron effect and avalanche multiplication can explain existing experimental data.