Effects of Total Thermal Balance on the Thermal Energy Absorbed or Released by a High-Temperature Phase Change Material

Front tracking and enthalpy methods used to study phase change processes are based on a local thermal energy balance at the liquid–solid interface where mass accommodation methods are also used to account for the density change during the phase transition. Recently, it has been shown that a local thermal balance at the interface does not reproduce the thermodynamic equilibrium in adiabatic systems. Total thermal balance through the entire liquid–solid system can predict the correct thermodynamic equilibrium values of melted (solidified) mass, system size, and interface position. In this work, total thermal balance is applied to systems with isothermal–adiabatic boundary conditions to estimate the sensible and latent heat stored (released) by KNO3 and KNO3/NaNO3 salts which are used as high-temperature phase change materials. Relative percent differences between the solutions obtained with a local thermal balance at the interface and a total thermal balance for the thermal energy absorbed or released by high-temperature phase change materials are obtained. According to the total thermal balance proposed, a correction to the liquid–solid interface dynamics is introduced, which accounts for an extra amount of energy absorbed or released during the phase transition. It is shown that melting or solidification rates are modified by using a total thermal balance through the entire system. Finally, the numerical and semi-analytical methods illustrate that volume changes and the fraction of melted (solidified) solid (liquid) estimated through a local thermal balance at the interface are not invariant in adiabatic systems. The invariance of numerical and semi-analytical solutions in adiabatic systems is significantly improved through the proposed model.     

Synthesis of monobutyrylglycerol by transesterification with soluble and immobilized lipases

Transesterification between ethyl butyrate and glycerol using very different lipase preparations (native, modified, and immobilized) in a two-phase system—no extra solvent added—has been investigated. Optimal conversion was obtained with the presence of 5% water in the reaction mixture. Only monobutyrin was produced in all conditions tested. The best enzyme preparations were nativeCandida cylindracea lipase,Mucor miehei lipase immobilized on a phenol-formaldehyde exchange resin (Lipozyme?), andC. cylindracea lipase immobilized on Celite.     

Electrochemical and ESR study of 5-nitrofuryl-containing thiosemicarbazones antiprotozoal drugs

Cyclic voltammetry and electron spin resonance (ESR) techniques were used in the investigation of several potential antiprotozoal thiosemicarbazones nitrofurane derivatives. A self-protonation process involving the protonation of the nitro group due to the presence of an acidic proton in the thiosemicarbazone moiety was observed in the first step of a CEE(rev) reduction mechanism of these derivatives. ESR spectra of the free radicals obtained by electrolytic reduction were characterized and analyzed. AM1 methodology was used to obtain the optimized geometries and UB3LYP calculations were performed to obtain the theoretical hyperfine coupling constants. The theoretical study exhibited an unusual assignment of the spin densities showing a free radical centered in the thiosemicarbazone moiety rather than the nitro which are in agreement with the experimental hyperfine pattern.     

Solubility of benzil in binary alkane + dibutyl ether solvent mixtures. Comparison of predictive expressions derived from the nearly ideal binary solvent model

Experimental solubilities are reported for benzil dissolved in six binary mixtures containing dibutyl ether with hexane, heptane, octane, cyclohexane, methylcyclohexane, and 2,2,4-trimethylpentane at 25°C. Results of these measurements are compared to the predictions of equations developed previously for solubility in systems of nonspecific interactions. The most successful equation in terms of goodness of fit involved a volume fraction average of the excess Gibbs energies relative to the Flory-Huggins model, and predicted the experimental solubilities in the six systems studied to within an overall average absolute deviation of 3.4% and with a maximum deviation of 6.0%.     

Role of surface crossings in the photochemistry of nitromethane

The photodissociation dynamics of nitromethane (CH(3)NO(2)) starting at the S(3) excited state has been studied at the complete active space self-consistent field level of theory in conjunction with atomic natural orbital type basis sets. In addition, the energies of all the critical points and the energy profiles connecting them have been recomputed with the multiconfigurational second-order perturbation method. It is found that the key step in the reaction mechanism is a radiationless decay through an S(3)S(2) conical intersection. The branching space spanned by the gradient difference and nonadiabatic coupling vectors of this crossing point comprises dissociation into excited nitromethane plus singlet atomic oxygen [CH(3)NO(1A")+O((1)D)] and S(3)-->S(2) deactivation, respectively. Furthermore, deactivated nitromethane S(n (n<3)) can decompose in subsequent steps into CH(3)+NO(2), where NO(2) is generated at least in two different electronic states (1 (2)B(2) and 1 (2)A(1)). It is shown that formation of excited nitric oxide NO(A (2)Sigma) arises from CH(3)NO(1A") generated in the previous step. In addition, four crossings between singlet and triplet states are localized; however, no evidence is found for a relevant role of such crossings in the photochemistry of CH(3)NO(2) initiated at S(3) state in the gas phase.     

Perchlorate interchange during the redox process of PPy/PVS films in an acetonitrile medium. a voltammetric and EDX study

Polypyrrole/poly(vinyl sulfonate) (PPy/PVS) films in acetonitrile containing 0.1 M LiClO4 were studied by cyclic voltammetry. Consecutive voltammograms pointed to a continuous increase in the charge involved in the process, suggesting a rise in the number of the electroactive participants involved in the redox process. However, voltammograms obtained for the PPy/ClO4 films in analogous conditions pointed to a steady-state behavior from the very early cycles. Theoretical studies based on the Nernst and Butler-Volmer equations indicated that perchlorate ions are involved during the oxidation/reduction process of the PPy/PVS films when the steady state is reached. This result was confirmed by "ex situ" energy-dispersive X-ray analysis of the films. In this regard, the electrochemical behavior of PPy/PVS polymers was similar to that of PPy/ClO4 films when a high number of cycles were carried out. The exchange of ClO4- during the redox reaction of the PPy/PVS films made it necessary to incorporate Li+ cations inside the polymer during the initial voltammetric cycles to compensate for the negative charges of PVS polyanions. Li+ cations are mainly stabilized inside the polymer by the ion pairs formed with the sulfonated groups of the PVS. An increase and shift of the voltammetric cycles indicated a restructuring of the polymeric chains with consecutive scans.     

Synthesis and Evaluation as Glycosidase Inhibitors of Isoquinuclidines Mimicking a Distorted β‐Mannopyranoside

Racemic and enantiomerically pure manno‐configured isoquinuclidines were synthesized and tested as glycosidase inhibitors. The racemic key isoquinuclidine intermediate was prepared in high yield by a cycloaddition (tandem Michael addition/aldolisation) of the 3‐hydroxy‐1‐tosyl‐pyridone 10 to methyl acrylate, and transformed to the racemic N‐benzyl manno‐isoquinuclidine 2 and the N‐unsubstituted manno‐isoquinuclidine 3 (twelve steps; ca. 11% from 10 ). Catalysis by quinine of the analogous cycloaddition of 10 to (?)‐8‐phenylmenthyl acrylate provided a single diastereoisomer in high yield, which was transformed to the desired enantiomerically pure D ‐manno‐isoquinuclidines (+)‐ 2 and (+)‐ 3 (twelve steps; 23% from 10 ). The enantiomers (?)‐ 2 and (?)‐ 3 were prepared by using a quinidine‐promoted cycloaddition of 10 to the enantiomeric (+)‐8‐phenylmenthyl acrylate. The N‐benzyl D ‐manno‐isoquinuclidine (+)‐ 2 is a selective and slow inhibitor of snail β‐mannosidase. Its inhibition strength and type depends on the pH (at pH 4.5: K_i=1.0 μM , mixed type, α=1.9; at pH 5.5: K_i=0.63 μM , mixed type, α=17). The N‐unsubstituted D ‐manno‐isoquinuclidine (+)‐ 3 is a poor inhibitor. Its inhibition strength and type also depend on the pH (at pH 4.5: K_i=1.2?10³ μM , mixed type, α=1.1; at pH 5.5: K_i=0.25?10³ μM , mixed type, α=11). The enantiomeric N‐benzyl L ‐manno‐isoquinuclidine (?)‐ 2 is a good inhibitor of snail β‐mannosidase, albeit noncompetitive (at pH 4.5: K_i=69 μM ). The N‐unsubstituted isoquinuclidine (?)‐ 2 is a poor inhibitor (at pH 4.5: IC₅₀=7.3?10³ μM ). A comparison of the inhibition by the pure manno‐isoquinuclidines (+)‐ 2 and (+)‐ 3 , (+)‐ 2 /(?)‐ 2 1 : 1, and (+)‐ 3 /(?)‐ 3 1 : 1 with the published data for racemic 2 and 3 led to a rectification of the published data. The inhibition of snail β‐mannosidase by the isoquinuclidines 2 and 3 suggests that the hydrolysis of β‐D ‐mannopyranosides by snail β‐mannosidase proceeds via a distorted conformer, in agreement with the principle of stereoelectronic control.     

Preparation of new monoanionic "scorpionate" ligands: synthesis and structural characterization of titanium(IV) complexes bearing this class of ligand

The preparation of new "scorpionate" ligands in the form of the lithium derivatives [(Li(bdmpzdta)(H(2)O))(4)] (1) [bdmpzdta = bis(3,5-dimethylpyrazol-1-yl)dithioacetate], [Li(bdphpza)(H(2)O)(THF)] (2) [bdphpza = bis(3,5-diphenylpyrazol-1-yl)acetate], and [Li(bdphpzdta)(H(2)O)(THF)] (3) [bdphpzdta = bis(3,5-diphenylpyrazol-1-yl)dithioacetate] has been carried out. Furthermore, a series of titanium complexes has been prepared by reaction of TiCl(4)(THF)(2) with the lithium reagents [(Li(bdmpza)(H(2)O))(4)] (4) [bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] and 1. Under the appropriate experimental conditions neutral complexes, namely [TiCl(3)(kappa(3)-bdmpza)] (5), [TiCl(3)(kappa(3)-bdmpzdta)] (6), and [TiCl(2)(kappa(2)-bdmpzdta)(2)] (7), and cationic complexes, namely [TiCl(2)(THF)(kappa(3)-bdmpza)]Cl (8) and [TiCl(2)(THF)(kappa(3)-bdmpzdta)]Cl (9), were isolated. Complexes 8 and 9 undergo an interesting nucleophilic THF ring-opening reaction to give the corresponding alkoxide-containing species [TiCl(2)(kappa(3)-bdmpza)(O(CH(2))(4)Cl)] (10) and [TiCl(2)(kappa(3)-bdmpzdta)(O(CH(2))(4)Cl)] (11). A family of alkoxide-containing complexes of general formulas [TiCl(2)(kappa(3)-bdmpza)(OR)] [R = Me (12); R = Et (14); R = (i)Pr (16); R = (t)Bu (18)] and [TiCl(2)(kappa(3)-bdmpzdta)(OR)] [R = Me (13); R = Et (15); R = (i)Pr (17)] was also prepared. The structures of these complexes have been determined by spectroscopic methods, and in addition, the X-ray crystal structures of 3, 7, 10, and 11 were also established.     

Discovery of an all-donor aromatic [2]catenane

We report herein the first all-donor aromatic [2]catenane formed through dynamic combinatorial chemistry, using single component libraries. The building block is a benzo[1,2-b:4,5-b′]dithiophene derivative, a π-donor molecule, with cysteine appendages that allow for disulfide exchange. The hydrophobic effect plays an essential role in the formation of the all-donor [2]catenane. The design of the building block allows the formation of a quasi-fused pentacyclic core, which enhances the stacking interactions between the cores. The [2]catenane has chiro-optical and fluorescent properties, being also the first known DCC-disulphide-based interlocked molecule to be fluorescent.

An all-donor [2]catenane has been synthesised via dynamic combinatorial chemistry. It features stacked benzodithiophenes which are quasi-pentacyclic through hydrogen bonding.     

Mixed halodicyclopentadienyl-niobium(V) and -tantalum(V)

Oxidation of (η⁵-C₅H₅)₂MCl (M = Nb, Ta) with 1 mol of Cl₂, Br₂ or I₂ gives (η⁵-C₅H₅)₂MClX₂ whereas the reaction with an excess of the halogen gives the cationic complexes [η⁵-C₅H₅)₂MClX]⁺ X₃^? (X = Br, I). Similar oxidation of (η⁵-C₅H₅)₂MCl₂ with 0.5 mol of halogen gives (η⁵-C₅H₅)₂MCl₂X complexes, but if the halogen is used in excess cationic [η⁵-C₅H₅)₂MCl₂]⁺ X₃^? (X = Br, I; M = Ta and X = I, M = Nb) are obtained. All these complexes can also be obtained simultaneously by oxidizing (η⁵-C₅H₅)₄M₂Cl₃, and the separation is fairly easy in most cases. Conductivity and IR and NMR data are discussed.