THE EFFECTS OF PORPHYRIN STRUCTURE AND AGGREGATION STATE ON PHOTOSENSITIZED PROCESSES IN AQUEOUS AND MICELLAR MEDIA

The efficiency of several porphyrins at 10 μM and 83 μM as sensitizers of the photooxidation of 0.1 mM tryptophan and histidine via a singlet oxygen-mechanism was studied in pH 7.4-buffered aqueous solutions and in aqueous dispersions of Triton X-100 micelles. The porphyrins were either solubilized in the bulk aqueous medium or associated with the micellar phase, whereas the amino acids were always located in the aqueous phase. With those porphyrins, such as uroporphyrin I, meso-tetra (4-sulfonatophenyl)porphine, meso-tetra(4-carboxyphenyl)porphine and meso-tetra)N,N,N-trimethylanilinium)porphine, which are > 98% monomeric in both media, the efficiency of histidine photooxidation was independent of the site of O₂(¹Δ_g) generation, as shown by the closely similar values for the photooxidation rate constant and oxygen-consumption quantum yield in the presence and absence of Triton micelles; the same indications were provided by photokinetic experiments with tryptophan. Actually, laser flash photolysis studies showed that the micelle-incorporation of the above mentioned porphyrins brought about only minor changes in their photophysical properties, including the relative yield of O₂(¹Δ_g) generation. On the other hand, hematoporphyrin IX, its Zn²⁺-complex, and coproporphyrin III are largely aggregated in homogeneous aqueous solution; their incorporation into Triton micelles caused an increase of the triplet quantum yield and an enhancement of the oxygen-consumption quantum yield and photooxidation rate constant for both histidine and tryptophan. The lower photosensitizing efficiency of aggregated porphyrin species in comparison with the corresponding monomeric porphyrin was confirmed by measuring the initial rate and quantum yield of oxygen consumption upon irradiation of 1 mM histidine and tryptophan in the presence of different hematoporphyrin concentrations within the 0.3-100μM range.     

Moment characterization of localized orbitals

The parallel between orbital first and second electric moments and statistical first and second central moments is noted. Three measures of orbital spatial distribution in terms of their moments are proposed, and applied to the LMO's in a series of ten-electron hydrides. Consistent differences between bond and lone pair distributions are found. Using the statistical interpretation, for each LMO an effective solid angle around the central atom is postulated.     

Steric and kinetic effects of changing solvent and reactant in grignard reactions: Conformationally mobile versus rigid δ-keto esters

trans-7α-carbomethoxy-decal-1-one (2) yields a mixture of the two oxy-esters 6 and 7 on reacting with MeMgX. Ratios $\text{6}\text{7}$ were measured for reactions performed in benzene (with X = I) and in THF (with X = Cl). The small variations of the ratios $\text{6}\text{7}$ as compared to those obtained in analogous experiments performed with methyl (2-oxo-cyclohexyl)-propionate 4 and methyl 4-methyl-5-oxo-hexanoate 5 suggest that conformational mobility plays a fundamental role in determining the variations of stereospecificity with varying the reaction conditions. Competitive Grignard reactions among 2,4 and 5 show that their reactivities are in the order 4>2>5 ($\text{K}{}_4\text{k}{}_2$ = 1.7; $\text{k}{}_5\text{k}{}_2$=0.8) when reactions are performed in benzene with X  I and 2>4>5 ($\text{k}{}_4\text{k}{}_2$= 0.56; $\text{k}{}_5\text{k}{}_2$=0.25) when reactions are performed in THF with X  C1. The experimental data are interpreted in terms of anchimeric assistance given by the ester group to the reactions of the keto group in conformationally mobile δ-keto esters. The occurrence of this effect depends on the reaction conditions which can favour, or not, folded transition states.     

Ionization and appearance potentials in organic chemistry. II—Appearance potentials and enthalpy differences for the stereoisomers of methylbicyclo[4.4.0]decanes

The ionization potentials for the stereoisomers of trans-fused 2- and 3-methylbicyclo[4.4.0]decanes and the appearance potentials for the ions at m/e 137 [M–CH₃]⁺, 109, 96, 95 and 82 were measured by the electron impact method. The ionization potentials and appearance potentials of the [M–CH₃]⁺ ions appeared to be equal for each of the epimers. Appearance potentials of the other ions were always lower for the less stable epimer. No quantitative correlation was observed between the difference in the appearance potentials for any ions and the differences in enthalpies of the ground states.     

Microstructure determination of poly-(1,3-pentadiene) by a combination of infrared, 60-MHz NMR, 300-MHz NMR,and X-ray diffraction spectroscopy

A quantitative procedure has been developed for characterizing the complete microstructure of polymers of 1,3-pentadiene, including the tacticity of any crystalline component. This can be accomplished by a combination of infrared spectroscopy, X-ray crystallinity, and 300-MHz NMR spectroscopy. A series of high structural purity polymers were synthesized with a series of previously unreported mixed microstructures. These samples were characterized by using the three techniques mentioned, including the previously unreported 300-MHz NMR data. With those results a 60-MHz NMR/IR method of spectroscopy was developed to determine the composition of poly(1,3-pentadiene)s in terms of percent cis-1,2-, cis-1,4-, trans-1,4-, and 3,4-pentadiene units.     

Equilibrium of the reaction between dissolved sodium sulfide and biologically produced sulfur

The equilibrium of the heterogeneous reaction between dissolved sodium sulfide and biologically produced sulfur particles has been studied. Biologically produced sulfur was obtained from a bioreactor of a hydrogen sulfide removal process in which the dominating organism is Thiobacillus sp. W5. Detailed knowledge of this reaction is essential to understand its effect on the process. The results were compared with the equilibrium of the reaction of sulfide with ‘inorganic’ elemental sulfur. The equilibrium between dissolved sodium sulfide and biologically produced sulfur particles can be described by an equilibrium constant, K_x, which consists of a weighted sum of constants for polysulfide ions of different chain length, rather than a true single equilibrium constant. For biologically produced sulfur pK_x = 9.10 ± 0.08 (21 °C) and 9.17 ± 0.09 (35 °C) with an average polysulfide chain length x = 4.91 ± 0.32 (21 °C) and 4.59 ± 0.31 (35 °C). The pK_x value for biologically produced sulfur is significantly higher than for reaction of dissolved sodium sulfide with inorganic sulfur (pK_x = 8.82; 21 °C). This difference is probably caused by the negatively charged polymeric organic layer, which is present on biologically produced sulfur but absent with “inorganic” sulfur. Specific binding of polysulfide ions to the organic layer results in a higher polysulfide concentration at the reaction site compared to the bulk concentration. This results in an apparent decrease of the measured equilibrium constant, K_x.     

Analytical and radioanalytical quality control of purity and stability of radiopharmaceutical compound [186gRe]Re-HEDP for bone metastases pain palliation

Summary The nuclear properties of ^186gRe make it a useful agent for radionuclide therapy and imaging. The coordination compound [^186gRe]Re-HEDP has proved to be a successful bone seeking agent for palliation of metastatic bone pain. Chemical, radiochemical and radionuclidic purity of commercial radiopharmaceutical [^186gRe]Re-HEDP have been checked by means by γ- and β-spectrometries, INAA and paper radio-chromatography. The results indicate a good radionuclidic purity, with levels of contamination from the short-lived ¹⁸⁸Re well below the required specifications. After injection of the radiopharmaceutical, the radiochemical measurements conducted in vivo, on biological matrices, blood, plasma and urine, have shown that, entering the systemic circulation, ^186gRe dissociates from the bis-phosphonate complex as hydrosoluble [^186gRe]ReO₄-, and the two chemical species follow different biokinetics.     

Molecular Dynamics Simulation of Surfactant Microaggregates in the Apolar Medium of <Emphasis Type="Italic">n</Emphasis>-Octane

Molecular dynamics simulation of reverse micelles of a cationic surfactant and water clusters in n-octane is performed. The main structural and thermodynamic characteristics of the systems are obtained. On average, the micelles have a spherical shape. The partial ion distribution densities virtually coincide, indicating the formation of stable ion pairs. The local profiles of the component distribution densities make it possible to establish that both water and oil slightly penetrate into the region where the hydrophobic portion of the surfactant is located. Separate cation-anion complexes dissolve in the aqueous cavity of a micelle. The hydration shells of the ions overlap; at the same time, the first hydration shell contains up to three water molecules. The energy contributions of each of the components to their force interaction are characterized in detail. The principal contribution to the internal energy for micelles is due to electrostatic interaction between the surfactant molecules. The local normal pressure is calculated, and its value is used to estimate the effective surface tension for the systems in question.__________Translated from Kolloidnyi Zhurnal, Vol. 67, No. 4, 2005, pp. 500–507.Original Russian Text Copyright © 2005 by Mudzhikova, Brodskaya.     

Thiophene conversion in the BIMF process

Catalytic conversion of an oil distillate with the added extra amounts of thiophene over a zeolite catalyst was studied. The rate of the catalyst deactivation was found to increase with the increase in the thiophene concentration in the feed. A possible pathway of the thiophene conversion is discussed.     

Separation and identification of organic and organometallic compounds by use of a liquid chromatography-particle beam-glow discharge mass spectrometry combination

Evaluation of the particle beam glow discharge mass spectrometry (PB-GDMS) system as a detector for liquid chromatography (LC) is described for the analysis of polycyclic aromatic hydrocarbons, steroids, selenoamino acids, and alkyllead compounds. A particle beam interface is used to introduce analyte species from the LC into a glow discharge source for subsequent vaporization and ionization. Mass spectra display classic EI fragmentation patterns for the organic compounds, as well as elemental and molecular information for the organometallic compounds. Chromatographic separations display good temporal correlation between UV and PB-GDMS detection modes. Detection limits for Pb in lead nitrate, triethyllead, and triphenyllead fall in the sub-ppb (ng) range.