钽硫原子簇的形成及激光裂解的初步研究

报导用激光直接溅射的方法产生了大量的钽硫原子团簇离子Ta_nS_m~+(n≤9, m≤30),并用串级飞行时间质谱仪研究了所产生团簇离子的组成及紫外激光裂解规律。实验发现, 最稳定的团簇正离子往往具有Ta_nS_(2n+7)~+(n=1,2,…9)的组成, 相应的负离子具有, Ta_nS_(2n+3)~-(n=1,2,…9)的组成。各种团簇正离子的激光裂解的主要通道是连续的S_2消除过程, 且对于n=3,4,5的团簇, 主要光解产物还有Ta_3S_4~+或Ta_4S_6~+离子。据此推测出Ta_nS_m~+团簇离子的可能结构为在Ta原子周围有6个左右的S原子配位。Ta原子之间不存在直接的化学键,而较大团簇可能是以Ta_3S_4或Ta_4S_6为核心的结构。     

Properties of poly(vinyl chloride)/wood flour/montmorillonite composites: Effects of coupling agents and layered silicate

Organomodified montmorillonite (OMMT) was prepared using cetylalkyl trimethyl amine bromide. OMMT and wood flour (WF) were surface-modified by silane coupling agent. They were melt-blended with polyvinyl chloride (PVC) and extruded into wood-plastic composite samples using one conical twin screw extruder. The effects of their contents on the composite mechanical properties were investigated. X-ray diffraction, transmission electron microscopy and scanning electron microscopy observed intercalation and dispersion of the OMMT. FTIR and X-ray photoelectron spectroscopy were used to analyze the silane-modification effects. The possible reaction mechanisms were proposed. After wood flour was modified by 1.5 phr silane, the impact strength and the tensile strength of wood flour-PVC composite were increased by 14.8% and 18.5%, respectively. Mechanical tests showed that the addition of OMMT did not enhance the untreated wood flour-PVC composites. However, adding 0.5% OMMT did improve the mechanical properties of the treated ones. The grafting improved the interfacial compatibility between components producing higher properties of the composites. Further addition of OMMT reinforced the composites. Too higher contents of silane and OMMT impaired some properties because of weak interfacial layer and higher concentrated stress. Cone calorimetry showed that the fire flame retardancy and smoke suppression of composites were strongly improved with the addition of OMMT.     

Determination of traces of bismuth by quenching of solid-substrate room-temperature phosphorescence from morin-labeled silicon dioxide nano-particles

Silicon dioxide nano-particles, diameter 50 nm, containing morin (morin–SiO₂) have been synthesized by the sol–gel method. They emit strong and stable room-temperature phosphorescence (SS-RTP) on filter paper as substrate, and bismuth can quench the intensity of the SS-RTP. On this basis a new morin–SiO₂ solid-substrate room-temperature phosphorescence-quenching method has been established for determination of traces of bismuth. Reduction of phosphorescence intensity (I_p) is directly proportional to the concentration of bismuth in the working range 0.16–14.4 ag spot^–1 (sample volume 0.40 L spot^–1, corresponding to the concentration range 0.40–36.0 fg mL^–1). The regression equation of the working curve is I_p=14.86+5.279×[Bi³⁺] (ag spot^–1) (n=6, r=0.9982). The detection limit of this method is 0.026 ag spot^–1 (corresponding to a concentration of 6.5×10^–17 g mL^–1).This sensitive, reproducible and accurate method has been used for successful analysis of real samples.     

Light-emitting tridentate cyclometalated platinum(II) complexes containing sigma-alkynyl auxiliaries: tuning of photo- and electrophosphorescence

The synthesis and structural, photophysical, electrochemical, and electroluminescent properties of a class of platinum(II) complexes bearing sigma-alkynyl ancillary ligands, namely [(C/N/N)Pt(C[triple bond]C]nR] [H(C/N/N) = 6-aryl-2,2'-bipyridine; n = 1-4; R = aryl, alkyl, or trimethylsilyl], have been studied. Substituents with different steric and electronic properties were introduced into the tridentate cyclometalating and arylacetylide ligands, and the pi-conjugation length of the oligoynyl moiety was homologously extended from ethynyl to octatetraynyl. The X-ray crystal structures of several derivatives confirm the Pt-(CC) ligation and reveal various intermolecular interactions, such as pi-pi, Pt...Pt, and C-H...F-C. The complexes display good thermal stability and intense phosphorescence in fluid and glassy solutions with high quantum yields and microsecond lifetimes. Their emission energies are sensitive to solvent polarity, the electronic affinities of the substituents on both the cyclometalating and arylacetylide groups, and the length of the oligoynyl ligand. By choosing appropriate cyclometalating and sigma-alkynyl ligands, the emission color of this class of platinum(II) complexes can be tuned from green-yellow to saturated red. In addition to (3)MLCT [Pt(5d) --> pi*(C/N/N)] and (3)IL(C/N/N), intriguing (3)IL(alkynyl) excited states localized on -(C[triple bond]C)(4)- and -(C[triple bond]Cpyrenyl-1) moieties that afford narrow-bandwidth emissions have been observed. Selected Pt(II) complexes were doped into the emissive region of multilayer, vapor-deposited organic light-emitting diodes. The tunable electrophosphorescence energy resembles that recorded in fluid solutions for these emitters, and the devices exhibit high luminance and efficiencies (up to 4.2 cd A(-1)).     

The effect of β-cyclodextrin on the properties of cetyltrimethylammonium bromide micelles

The effect of ß-cyclodextrin (ß-CD) on cetyltrimethylammonium bromide (CTAB) micellar properties was studied by the determination of the diffusion coefficient, D. When the CTAB micelles have a spherical structure, D firstly increased and then remained unchanged, while the micellar aggregation number, N, decreased with the addition of ß-CD. When the CTAB concentration was less than the first critical micellar concentration, CTAB molecules could be included into ß-CD cavities with the molar ratio of CTAB to ß-CD being about 1:1. However, when the CTAB concentration was higher than the first critical micellar concentration, mixed spherical micelles were formed with the molar ratio of CTAB to ß-CD being 9:1.     

Mapping the binding site of a large set of quinazoline type EGF-R inhibitors using molecular field analyses and molecular docking studies

In the current work, three-dimensional QSAR studies for one large set of quinazoline type epidermal growth factor receptor (EGF-R) inhibitors were conducted using two types of molecular field analysis techniques: comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA). These compounds belonging to six different structural classes were randomly divided into a training set of 122 compounds and a test set of 13 compounds. The statistical results showed that the 3D-QSAR models derived from CoMFA were superior to those generated from CoMSIA. The most optimal CoMFA model after region focusing bears significant cross-validated r(2)(cv) of 0.60 and conventional r(2) of 0.92. The predictive power of the best CoMFA model was further validated by the accurate estimation to these compounds in the external test set, and the mean agreement of experimental and predicted log(IC(50)) values of the inhibitors is 0.6 log unit. Separate CoMFA models were conducted to evaluate the influence of different partial charges (Gasteiger-Marsili, Gasteiger-Hückel, MMFF94, ESP-AM1, and MPA-AM1) on the statistical quality of the models. The resulting CoMFA field map provides information on the geometry of the binding site cavity and the relative weights of various properties in different site pockets for each of the substrates considered. Moreover, in the current work, we applied MD simulations combined with MM/PBSA (Molecular mechanics/Possion-Boltzmann Surface Area) to determine the correct binding mode of the best inhibitor for which no ligand-protein crystal structure was present. To proceed, we define the following procedure: three hundred picosecond molecular dynamics simulations were first performed for the four binding modes suggested by DOCK 4.0 and manual docking, and then MM/PBSA was carried out for the collected snapshots. The most favorable binding mode identified by MM/PBSA has a binding free energy about 10 kcal/mol more favorable than the second best one. The most favorable binding mode identified by MM/PBSA can give satisfactory explanation of the SAR data of the studied molecules and is in good agreement with the contour maps of CoMFA. The most favorable binding mode suggests that with the quinazoline-based inhibitor, the N3 atom is hydrogen-bonded to a water molecule which, in turn, interacts with Thr 766, not Thr 830 as proposed by Wissner et al. (J. Med. Chem. 2000, 43, 3244). The predicted complex structure of quinazoline type inhibitor with EGF-R as well as the pharmacophore mapping from CoMFA can interpret the structure activities of the inhibitors well and afford us important information for structure-based drug design.     

Selective Transport of Alkali—Metal Cations through Liquid Membranes by Non—Cyclic Carriers

The emission spectra of a series of naphthalene end-labeled oligo-oxyethylene(N-Pn-N) and their facilitated transport of cations across liquid membranes have been investigated.Alkali-metal cations enhance or inhibit the intramolecular excimer formation of N-Pn-N remarkably,suggesting that the polyether chain of N-Pn-N in solution complexes with the cations,and the orientation of the terminal chromophores depends on the cation size and the length of the polyether chain. These compounds are able to act as carriers to facilitate transport of alkali-metal cations through organic liquid membranes.The transport efficiencies are comparable with those of cyclic carriers such as crown ethers,and show remarkable selectivity.     

Synthesis of meso-tetra-(3,5-dibromo-4-hydroxylphenyl)-porphyrin and its application to second-derivative spectrophotometric determination of lead in clinical samples

A new very sensitive and selective chromogenic reagent, meso-tetra-(3,5-dibromo-4-hydroxylphenyl)porphyrin [T(DBHP)P], was synthesized and studied for the determination of trace lead in detail. In 0.10 mol l-1 NaOH medium, lead reacts with T(DBHP)P to form a 1:2 yellow complex, which gives a maximum absorption at 479 nm; 0-0.48 microgram ml-1 Pb(II) obeyed Beer's law. The molar absorptivity of the complex and Sandell's sensitivity are 2.5 x 10(5) 1 mol-1 cm-1 and 0.000812 microgram cm-2, respectively. Second-derivative spectrophotometry is better than conventional spectrophotometry in sensitivity and selectivity, and its limit of quantification, limit of detection and relative standard deviation are 0.70 ng ml-1, 0.21 ng ml-1 and 1.0%, respectively. Ca (3250-fold), Mg (2000-fold), Sr (1000-fold), Ba (750-fold), Al (1000-fold), Bi (500-fold), Fe (2000-fold), Co (750-fold), Ni (1000-fold), Cu (750-fold), Zn (1250-fold), Cd (2500-fold) and Ag (550-fold) do not interfere with the determination of lead. The chromogenic system is remarkably superior to other reagents, especially porphyrin compounds. The influence caused by oxygen in air or in solution can be easily eliminated by adding Na2SO3. The reaction is very stable, the stability constant of the complex being 1.2 x 10(45). The chromogenic reaction is completed within 1 min at room temperature when 8-hydroxylquinoline is used as catalyst. The proposed method has been applied to the direct determination of trace lead in clinical samples. The accuracy and precision are both very satisfactory.     

Spectroscopy, NMR and DFT studies on molecular recognition of crown ether bridged chiral heterotrinuclear salen Zn(II) complex

A barium-containing crown ether bridged chiral heterotrinuclear salen Zn(II) complex BaZn2L(ClO4)2, where L is a folded dinuclear chiral (R,R)-salen ligand, has been synthesized and characterized by elemental analysis, 1H NMR, UV-vis, IR, circular dichroism (CD) spectra, and mass spectra. As a folded dinuclear chiral host, its recognition with achiral guests (imidazole derivatives), rigid bidentate guest (1,4-diazobicyclo[2,2,2]octane, DABCO) and chiral guests (amino acid methyl esters) was investigated by means of UV-vis spectrophotometric titration, CD spectra. The association constants of D-amino acid methyl esters are found to be higher than those of their L-enantiomer. The sandwich-type binding of BaZn2L(ClO4)2-DABCO supramolecular assembly was specially studied via 1H NMR titration and 1H ROESY. To understand the recognition on molecular level, density functional theory (DFT) calculations on B3LYP/LanL2DZ were performed on the minimal energy conformations of host, guests, and host-guest complexes. The minimal energy conformations were obtained by molecular mechanics (MM) optimization and molecular dynamics (MD) simulation. The results of single point energy, HOMO energy, and charges transfer were analyzed. The results of theoretical calculations are in good agreement with the experimental data.     

Radical-induced formation of some siloles and diazasiloles

The Bu(3)Sn radical-induced reaction of o-iodobenzylvinylsilanes and o-iodoallylsilanes leads to cyclic products in yields of 40-60%. These regioselective cyclizations occur with high preference for a 5-exo and a 7-endo mode with a 6-exo mode being absent. An example for ring closure via a 7-exo mode is described.