Techniques and Apparatus for Measuring Rotational Core Losses of Soft Magnetic Materials

In many situations such as the cores of a rotating electrical machine and the T joints of a multiphase transformer, the local flux density varies with time in terms of both magnitude and direction, i.e. the flux density vector is rotating. Therefore, the magnetic properties of the core materials under the rotating flux density vector excitation should be properly measured, modeled and applied in the design and analysis of these electromagnetic devices. This paper presents an extensive review on the development of techniques and apparatus for measuring the rotational core losses of soft magnetic materials based on the experiences of various researchers in the last hundred years.     

A structured light-based system for human heads

The 3-D modeling of heads by using optical triangulation techniques is of great interest in the context of virtual reality, telecommunication and computer animation. This paper presents a structured light-based system mainly for human heads. It is named “3-D Laser Color Scanner” (3DLCS). A 3-D model is obtained with a cylindrical scan. The laser beam is switched on and off using a “light valve” and two successive CCD frames are captured, one with the laser line showing and one without. We can simplify the laser line extracting by subtracting these two images.In this system, two CCD cameras are used to avoid occlusion problems. Color information is read from the CCD when the laser light is absent. Since traditional laser scanner will miss the range data in the low-reflectance areas such as the hair area of human head, a shape from silhouette algorithm is presented to overcome this problem. Finally, we give some results using our system. The resulting model is suitable for many applications.     

计算机在实验教学与管理中的应用探讨

计算机科学的发展，为物理实验教学和管理的改革开辟了广阔的天地．从教学管理的科学化到教学方式的多样化，都成为可能．从近年的教研和实践来看，计算机技术作为一种有效的辅助教学和管理手段，充分展现出特有的扩展信息量、节省课时、便于启发思维和活跃课堂气氛的优点，尤其是把图、文、声、像高度集于教学中，是一种有意义的、值得不断尝试的工作．     

Optical properties of surface-modified Bi2O3 nanoparticles

Stearic acid coated Bi₂O₃ nanoparticles in the size range of 5-13 nm were synthesized by the microemulsion method. HRTEM showed that the morphology of Bi₂O₃ nanoparticles was ellipsoidal. The absorption edge of Bi₂O₃ nanoparticles showed a blue shift of ∼0.45 eV, comparing with that of the bulk Bi₂O₃. At room temperature, Bi₂O₃ nanoparticles also showed a strong luminescence at 397 and 420 nm, depending on the excitation wavelength.     

Classical Limit of Expectation Values in a Wave Packet Involving Few Stationary States

Expectation values of physical quantities in a wave packet involving few stationary states in an infinite square well are calculated. Explicit results show that the expectation values in the classical limit go over to the corresponding classical quantity in the form of the arithmetic mean (in mathematical term, the Fejér's average) of the partial Fourier series converging to the classical quantity. The number of the stationary states is that of the partial Fourer series in the Fejér's average. The quantum uncertainty is then demonstrated to have a classical counterpart.     

高厚径比盲孔电镀

盲孔能够大大的增加板的密度,从而减小板面积。介绍了有关高厚径比盲孔电镀的有关工艺,从激光钻孔、金属化孔和电镀几个方面对孔径4mil以上的盲孔电镀进行了研究。     

垂直定向液晶光阀及光电特性的研究

系统地讨论了排列相畸变模式液晶光阀结构，原理和制作，结合实际测试对其等效电路和电学匹配进行了分析，详细讨论了它的光电特性及相互关系，实测的液晶垂直排列方式工作的液晶光阀性能指标为，分辨率大于５０ｌｐ／ｍｍ，白光输入灵敏度为６．７７μＷ／ｃｍ＾２，响应时间为２００ｍｓ／３００ｍｓ，白光输出对比度为２００：１。     

铸铝激光熔融处理后的组织与性能

应用光学和电子显微镜及显微硬度计研究了铸造Al-Si合金经激光表面熔融处理后的组织和性能。指出,组织分熔化区、过度区和基体三层。在熔化区中树枝状先共晶α相的平均宽度由原始组织的20～40μm细化到2～3μm,同时共晶组织也被大大细化。这些变化使显微硬度值由67.4提高至109～115.     

First observation of yrast band in odd-odd162Lu

High spin states of the odd-odd¹⁶²Lu nucleus have been studied via¹⁴⁷Sm(¹⁹F,4nγ)¹⁶²Lu reaction at 95 MeV beam energy. Level scheme for yrast band based onπ[h_11/2 v[i_13/2] quasiparticle configuration was established up to I ^π = (23^?) for the first time. This band shows the signature inversion in energy before backbending generally appeared in this mass region. It is stressed that the signature splitting in¹⁶²Lu is larger than that in the¹⁶⁰Tm nucleus.     

话音ATM交换的实现─—ATM论坛电路仿真系列建议

近年来，随着ATM主干网络的建设和发展，研究ATM对现有通信业务的支持方式和适配技术是目前ATM技术研究的热点之一。话音ATM交换在降低话音通信成本和简化网络操作环境等方面提供了大量的技术手段，并且支持在单一网络环境中的多种综合业务传输。ATM论坛制定了电路仿真系列建议，话音ATM交换的技术已经基本成熟。文章通过对话音ATM交换在实现和优化方面的技术进行分析，并提出一种基于NativeModeATM的话音通信方式。