Synthesis and characterization of novel polyimides with 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide

2,2‐Bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide (6FADAP), containing fluorine and phthalimide moieties, was synthesized via the Williamson ether condensation reaction from 1‐chloro‐4‐nitrobenzene and phenolphthalein‐3′,5′‐bis(trifluoromethyl)anilide, which was followed by hydrogenation. Monomers such as 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐anilide containing phthalimide groups and 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein containing only phthalein moieties were also synthesized for comparison. The monomers were first characterized by Fourier transform infrared (FTIR), ¹H NMR, ¹⁹F NMR, elemental analysis, and titration and were then used to prepare polyimides with 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride. The polyimides were designed to have molecular weights of 20,000 g/mol via off‐stoichiometry and were characterized by FTIR, NMR, gel permeation chromatography (GPC), differential scanning calorimetry, and thermogravimetric analysis. Their solubility, water absorption, dielectric constant, and refractive index were also evaluated. The polyimides prepared with 6FADAP, containing fluorine and phthalimide moieties, had excellent solubility in N‐methylpyrrolidinone, N,N‐dimethylacetamide, tetrahydrofuran, CHCl₃, tetrachloroethane, and acetone, and GPC analysis showed a molecular weight of 18,700 g/mol. The polyimides also exhibited a high glass‐transition temperature (290 °C), good thermal stability (～500 °C in air), low water absorption (1.9 wt %), a low dielectric constant (2.81), a low refractive index, and low birefringence (0.0041). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3361–3374, 2003     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

Maximizing SNR in improper complex noise and applications to CDMA

The optimum linear time-invariant (LTI) filter that maximizes the signal-to-noise ratio (SNR) is, in general, the solution to an integral equation. This is the well-known matched filter. With regards to the detection of bandpass signals, we present the full form of the integral equation using the complex baseband representation of signals. The correct form of the complex integral equation includes, in addition to the autocorrelation function, a pseudoautocorrelation function which vanishes for most applications. However, in the presence of improper complex noise, overlooking the pseudoautocorrelation leads to a “nonoptimal” filter. To illustrate the concept, we apply the theory to a direct-sequence code-division multi-access (DS-CDMA) system in which improper complex noise arises. In the application, we derive the SNR maximizing filter and the nonoptimal filter and compare their near-far resistances     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Preparation of Fe–Si–B–Nb amorphous powder cores with excellent high-frequency magnetic properties

FeSiBNb amorphous powder cores were prepared with the amorphous powder by gas atomization and subsequent hot pressing of resulting powder after creating oxide layers on the amorphous powder. Fully amorphous FeSiBNb powders with good soft magnetic properties were successfully obtained in the particle size range below 100 μm. FeSiBNb amorphous powder cores exhibit stable permeability up to 10 MHz, showing excellent high-frequency characteristics.     

Characteristics of Ti0.97Co0.03O2:Sb0.01 dilute magnetic semiconducting thin films deposited at 500 °C by pulsed laser deposition

Epitaxial Ti_0.97Co_0.03O₂:Sb_0.01(TCO:Sb) films were deposited on R-Al₂O₃ (1 1 0 2) substrates at 500 °C in various deposition pressures by pulsed laser deposition. The solubility of cobalt within the films increases with decreasing deposition pressure at a deposition temperature of 500 °C. The TCO:Sb films deposited at 5×10⁻⁶ Torr exhibit a p-type anomalous Hall effect having a hole concentration of 6.1×10²²/cm³ at 300 K. On the other hand, films deposited at 4×10⁻⁴ Torr exhibits an n-type anomalous Hall effect having an electron concentration of about 1.1×10²¹/cm³. p- or n-type DMS characteristics depends on the change of the structure of TCO:Sb films and the solubility of Co is possible by controlling the deposition pressure.     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.